ReviewsSafety Saws

SUIZAN Japanese Folding Dozuki Dovetail Pull Saw 9.5 Inch, Hand Saw for Woodworking

  • JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
  • JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.
  • For Cross Cut, Blade Length: 9.5"(240mm), Blade Thickness: 0.012"(0.3mm), TPI: 25(1.0mm), Kerf Width: 0.....
Check Stock

Automatic Vacuum Switch, Ortis Dust Control Autoswitch for More Power Tools, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Adjustable Actuation Threshold

  • ... too long or being unable to shut off after tool has stopped..
  • CONFIGURABLE SHUTOFF DELAY TIME: Automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency..
  • TURN ON DELAY & SAFETY: Automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Adopting UL-certified American Standard 14AWG power cord which allowable passage with a large current more than 30A. Thick copper core, covered with PC+ABS V0 grade flame retardant material, less heat during use and extend service life..
  • COMPATIBILITY: Supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders, Routers, Joiners, Planers etc. Max motor rating should not exceed 120V/15A 50/60Hz, 1875W..
Check Stock

SUIZAN Japanese Dozuki Dovetail Hand Saw 7 Inch Pull Saw Tenon Saw for Cross-cut, Rip-cut, Slant Cutting

  • JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
  • JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.
Check Stock

SKIL 75940 Titanium 7-1/4-Inch 40 Tooth ATB Thin Kerf Crosscutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor

  • Home Power Tools Saws Parts Circular Saw Blades.
Check Stock

Luckyway 10 Inch 52 Teeth with 5/8 Inch Arbor Multi-Purpose TCT Circular Saw Blade for Cutting Wood, Aluminum and Non-Ferrous Metals

  • DIMENSIONS - Includes 1pc 10*5/8*52T Multi-purpose TCT circular saw blade..
  • APPLICATION - Ideal for cross-cutting Wood Plastic Aluminum Metal Cutting. Suitable for Miter saws and Table saws..
  • MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
  • FEATURES - Incorporates an TCG (Triple Chip Grind) design, Blade Use Steel cutting. Super-thin laser cut kerf for easy cutting high-density carbide stays sharper longer Perma-Shield nonstick coating protects blade..
  • Plate Material: 65Mn Steel.Special tooth design , cutting fast , cutting more safety..
Check Stock

SUIZAN Japanese Pull Saw Hand Saw 9.5 Inch Ryoba Double Edge Flush Cut Saw Woodworking tools

  • JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cut through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
  • JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN woodworking tools are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.
  • Since each handle is individually wrapped by hand by craftspeople, its appearance may vary from one to another. Cracks may occur during the manufacturing process. It is not a defect..
Check Stock

SUIZAN Japanese Flush Cut Saw Small Hand Saw 5 Inch Pull Saw for Hardwood and Softwood Woodworking tools Trim Saw

  • JAPANESE STYLE PULL SAW: This flush cut saw is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese hand saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
  • JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN woodworking tools are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • BLADE FOR HARDWOOD AND SOFTWOOD: With this small hand saw, you can easily cut oak, sandalwood, ebony, mahogany, maple, walnut and pine with a robust blade for hardwood. The blade for softwood can be used for white cedar, Japanese cedar, larch, paulownia wood and many others..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your ....
Check Stock

4.5 Inch Diamond Blade, Segmented Diamond Saw Blade for Angle Grinder, General Purpose Cutting Concrete, Block, Paver, Brick, Masonry and Stone, Wet/Dry Cut, 7/8\ Arbor

  • Manufacturing Technique: Sinter Hot-pressed Segmented Diamond Saw Blade. It achieves a faster cutting speed and longer cutting life-span in different materials..
  • Superior Quality designed for fast speed and stable life to cut Concrete, Block, Paver, Brick, Masonry and Stone and other abrasive materials..
  • The segmented diamond cutting blade is suitable to be used on the angle grinders, circular saws, tile saws, hand-held power saw. Please follow the safety symbols before the cutting work starts..
  • It’s Universal application in dry or wet cutting.
  • Segment Height: 10mm, Arbor Size: 7/8” with 5/8” copper bushing..
Check Stock

Concord Blades WCB1400T120HP 14-Inch 120 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

  • Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick.
  • For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 4,000.
  • Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood..
  • Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
  • 3.0 mm kerf design, ATB Grind & 15Degree hook.
Check Stock

Fifty Shades of Grey (Unrated Edition)

  • INCLUDES: Power Tool Switch Replacement with Safety On/Off Toggle Switch. Compatible with Ryobi 452080007 & Craftsman.
  • FUNCTION: Provides you with an emergency stop switch, allowing you to quickly and easily shut down your table saws, router tables, drill press and other electric power hand tools. Also serves as a cost effective replacement for most factory branded safety lock switches.
  • EASY TO USE: Made with a secure, simple and straightforward design that’s color coded and easy to mount in a convenient location – eliminating the need to reach under the table when your hands are full.
  • FEATURES: Removable power tool safety switch key that locks the switch, preventing accidental operations.
  • RATED CURRENT: 20 amps at 125 volts, 12 amps at 250 volts – Approved by UL, TUV, CSA, CE, ETL standards.
Check Stock

4.5 Inch Diamond Blade, Diamond Turbo Saw Blade for Angle Grinder, General Purpose Cutting Concrete, Masonry, Brick, Granite, Marble and Other Stone, Wet/Dry Cut, 7/8\ Arbor

  • Manufacturing Technique: Sinter Hot-pressed Segmented Diamond Saw Blade. It achieves a faster cutting speed and longer cutting life-span in different materials..
  • Superior Quality designed for fast speed and stable life to Cut Concrete, Masonry, Brick, Granite, Marble and Other Stone materials..
  • The diamond turbo cutting blade is suitable to be used on the angle grinders, circular saws, tile saws, hand-held power saw. Please follow the safety symbols before the cutting work starts..
  • It’s Universal application in dry or wet cutting..
  • Segment Height: 10mm, Arbor Size: 7/8” with 5/8” copper bushing..
Check Stock