ReviewsSales Continuity

Fluke BT510 Battery Analyzer

[ Polarity Testing & Continuity Testing ]: The power circuit probe tester can be used to test uncertain contact polarity in vehicles. When the it touches the positive pole, the indicator light will turn on red, and when it touches the negative pole, it will turn on green. In addition to polarity testing, the power short circuit finder can also perform continuity testing, it is mainly to test whether the circuit has continuity and whether it is short-circuited..
[ Quickly Tracking and Locating ]: The circuit tester is mainly used to test the on-off condition of the automobile electrical system under the 6-24V DC voltage. In most cases, a short circuit or momentary overload of a component will cause a fuse or circuit breaker to blow. When the fuse is blown due to a short circuit, using this circuit tester can help you quickly and accurately find the faulty wire and its fault point..
[ LED Indicator& Buzzer Dual Warning ]: In order to let you understand more intuitively and clearly understand the grounding of the components, the power circuit probe tester comes with an LED indicator and a buzzer. The test light can perform a quick self-test to ensure your tool is in good condition. When the current exceeds 7A, the circuit tester will disconnect the curren....

Check Stock

AstroAI Digital Multimeter TRMS 6000 & AstroAI New 2000 Counts Multimeter

Accurately Measurements: AC/DC Voltage, AC/DC Current, AC/ DC Millvolt ( Just for new 2000 count multimeter), Continuity, Capacitance, Diodes and more.
Detects Live Wires( Just for new 2000 count multimeter) :This unique function tests the presence of live wires. When it detects a live wire, the multimeter will reflect with the audio alarm..
Roubleshoots Safety: Automotive and household electrical problems safely and accurately.
Thoughtful Design: Support Data Hold, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like LCD Backlit Screen, Silicone Protective Case and Built-in kickstand make it easy to use..

Check Stock

Fieldpiece HS33 Expandable Manual Ranging Stick Multimeter for HVAC/R

The HS36 works with all Fieldpiece accessory heads enabling the user to test a wider variety of parameters from a single meter..
Auto Ranging: The HS36 is an auto ranging meter and is very accurate..
Non-Contact Voltage Indication: The NCV function is sensitive enough to detect 24VAC on thermostats..
High Voltage and Continuity Indicators: The Hi-V LED/Beeper for circuits over 30V. The continuity LED and beeper tells you if a circuit is open or closed..
Microamps for measuring the flame diode current in a heater control -- Capacitance for motor-start and motor-run capacitors..

Check Stock

Megger MIT310-EN Insulation Tester, 1000 Megaohms Resistance, 250V, 500V, 1000V Test Voltage

Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations.
Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
Dual digital display with analog arc function to replicate response of analog meters.
Measures insulation resistance from 0 to 1,000 megohms, voltage from 0 to 600V, and continuity from 0.01 to 100 ohms.
Safety rated to European Standard EN61010-1 Category III, 600V and IP54 rated for protection against dust and splashing water.

Check Stock

Automotive Car Repair Diagnostic Tool Cable Circuit Wire Tracker Tracers Analyzer Short Open Finder Tester Checker Device Detector Probe DC 6-42V

7" flexible probe allows reaching wires in congested places.
Sender:Tone/Off/Cont (Continuity) switch / Tone/Cont (Continuity) LEDs / Red and black test leads cable (61cm length, approximate).
Receiver: On/Off button / Test button / Probe length: 7" flexible probe.

Check Stock

TPI 100 EZ One Button Digital Multimeter with Protective Boot 40 Megaohms Resistance 600V AC/DC Voltage

Auto-ranging digital multimeter measures voltage and resistance, and performs continuity tests.
Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform.
Audible continuity sensor confirms that the circuit conducts electricity.
Molded rubber boot helps protect against damage from falls, impacts, and abrasion.
Meets IEC safety standard 61010 and is certified for Category II installations up to 1000V and Category III installations up to 600V.

Check Stock

Gardner Bender GDT-3200 Digital Multimeter, 7 Funct., 7 Range, Tests AC/DC Volt, Resist, Diode, Continuity, Temp and Battery, Auto Ranging

Clear, digital LCD display with backlighting.
Full family of digital multi-meters test AC Voltage, DC Voltage, Resistance, Continuity, Temperature, Diodes, and Batteries. Manual and Auto Ranging Styles.

Check Stock

Amprobe DGC-1000A Clamp Ground Resistance Tester

Ground resistance tester for measuring ground resistance, current, and continuity in multi-grounded systems.
True RMS meter provides accurate readings when measuring linear or non-linear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform.
Clamp-on head to measure resistance on a ground rod without the use of additional ground rods and without disconnecting the grounds under test.
Measures ground resistance from 0.025 to 1,500 ohms and AC current up to 10A.
Safety rated to European Standard 61010-2-32 Category III 300V, Category II 600V.
Continuity beep if the resistance is lower than 40.00 Ohms.

Check Stock

CMTOOL Test Light Automotive Power Circuit Probe Tester with 4M Test Lead 6-24V DC Led Light Tester Fuse Tester 12V Wire Circuit Tester Auto 12 Volt Electrical System Tools Car Truck Circuit Test Pen

..., high-temperature resistant, impact-resistant and has a longer service life. The tester also has an overload protection device, When the current exceeds 7A, the circuit breaker inside the device will automatically trip and give out a buzzer prompt..
2.【Polarity Test and Continuity Test】The tester is made of insulating material and high-quality stainless steel, which can help you quickly identify the positive and negative polarity of the vehicle cable and plug. When the tester touches the positive pole, the LED should be red.
when it touches the negative pole, the LED should be GREEN. The electric circuit tester is also used to check the continuity of switches, relays, diodes, fuses, and circuits..
3.【Component Activation and Testing】For professionals or car enthusiasts, this continuity tester is a great tool. The automotive short circuit tester can activate the components in/out of the vehicle's electrical system. The LED indicator and buzzer prompt can easily test and check whether the components are defective, or whether the rated current of the component is higher than the rated current of the tester..

Check Stock

Rothco Vintage Paratrooper Shorts, ACU, Large

[All Functions in Your Hand] - The KZYEE KM10 Power Scan Kit is the revolutionary circuit tester for 12-24V vehicles. You can access four precise diagnostic modes (DC Voltage, AC Voltage, Resistance and Diode), providing efficient electrical system testing, continuity testing, fault diagnosis, ground testing without fuses, component activation on and in the vehicle, and voltage detection. It is the perfect tool for all automotive electrical needs..
[Built-in Diagnostic Power] - With the press of a switch, you'll have an instant hot lead or ground lead. Use the probe tip and ground lead together to power up components in your hand. Easy to apply, it can power components such as radiator fans, starter motors, relays, window regulators, and windshield wipers. Quickly check components for continuity, identify positive, negative and open circuits, and locate shorts without wasting fuses..
[Best Repair Assistant for You] - Intuitive interface, the KM10 probe tester is an essential tool for automobile user to check system failure by themselves. The power circuit probe kit can also perform continuity and resistance checks, checking for the good and bad grounds, which a....

Check Stock

MR CARTOOL DY2201 Digital Car Tester Multimeter 500-10000 RPM Dwell Angle Temperature Meter Multimeter

【Function】Measure DC voltage and current, AC voltage and current, resistance, Duty ratio, temperature, diode transistor, continuity, dwell angle of automobile distributor contact, and motor speed.
Full range overload protection, continuity buzzer.
【Applies to】This product is suitable for automobile detection and servicing, engineering design, experimental test, production experiment, etc..
【Protection】To avoid misoperation, mechanical protection device is applied to the current measuring jack .The "mA" or "20" A socket can be opened only when selecting current for measurement, otherwise they will be blocked to effectively avoid inserting wrong probe, enhancing the product safety and life.

Check Stock