ReviewsSanding Sleeves

WEN 6535SPA Oscillating Spindle Sandpaper Sanding Sleeves with 5-5/8-Inch Height Assorted Grits 15 Pack

Features 1/2, 3/4, 1, 1-1/2, and 2 inch diameter sanding sleeves.
Includes 80, 120 and 240 grit sandpaper for a total of 15 sanding sleeves.
Extra long design measures in at 5-5/8 inches in length.
Perfect for material removal, resurfacing and more.
Designed to fit the WEN AT6535 Oscillating Spindle Sander with Beveling Table Top.

Powerful 3.5-amp oscillating spindle sander ideal for sanding contours, arcs, and curves.
Includes 6 sanding sleeves, 6 table inserts, 5 rubber sanding drums, and 5 drum washers.
Built-in exhaust port allows for vacuum cleaner connection to keep the work area clean.
2 year limited warranty protects against defects in materials and workmanship.

1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified.
Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H.
Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3".
Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle).

20 PIECE DRILL PRESS ACCESSORIES: Create holes, smooth out rough edges and cuts, polish jade and other art materials, or contour irregular shapes into your projects with the 20 Piece Drill Press Sanding Drum Kit.
Use these drum sanders for woodworking and metalworking.
All pieces are packaged in a plastic blow-molded case for convenient storage, safe travel, and easy organization.
PERFECT SIZE ROTARY SANDING DRUMS FOR YOUR NEEDS: This drill press drum sander kit includes 4 reusable barrel sander arbor drum sander bit attachments that can fit your tools.
Each sanding bit provides a different diameter to meet your needs..
FITS YOUR TOOLS: Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachments.
Easily screw the shank of one of the sanding drill bit attachments into your tool then slip the correct sized sanding band over the mandrel and begin using your tool.
REPLACEMENT SANDING SLEEVES: Not only does this drill sander kit include 4 reusable rotary tool sanding drums, but it also includes 4 replacement sandpaper bands for each size mandrel for a total of 16 sanding bands.
Each size features two 80 and two 120 sand paper grits to meet your needs.
BUILT TO LAST: The 4 drill sanding attachment bit....

EASY TO USE - Take the hard work out of hand sanding curved surfaces like the inside of bowls and boxes! Guinevere Basic Sanding Kit easily connects....
TECHNOLOGY - Inflatable bulbs are gently pumped up through an air inlet in the drive shaft and conform to the shape of your work, whether concave,....
VERSATILITY - Our patented inflatable sanders work on wood, metal, rubber, leather, plastic, stone and glass. Ideal for difficult profiles, finishing....
QUALITY AND SAFETY - Every sanding sleeve is made to specifically fit each inflatable sander. The sanding cloth material is highly flexible and made....
COMPLETE KIT - King Arthur’s Tools Guinevere Basic Sanding Kit includes 1 inflatable round sander with 4 round sanding sleeves + 1 inflatable drum....

Package contains: 458 pieces of rotary sanding bands, 24 packs of rotary sanding drum mandrels and 2 packs of self-tightening drill chuck..
6 grits accessories: six types of sanding drum grits, 80 grit, 120 grit, 240 grit, 320 grit, 400 grit and 600 grit..
Size: three sizes of sanding drum sleeves, 1/2 inch, 3/8 inch and 1/4 inch..
Wide application: this rotary tool sanding accessories set would meet almost all your requirements in nut-carving, metal, wood, plastic, jade, circuit board and other DIY processing..
Easy to use: just need to slide the sanding drums into the drum sander, make sure the drum has been screwed tightly, you can directly start your project..

Package include - 120 pieces sanding bands in 3 diameters: 1/2", 3/8" and 1/4", 40 pieces per size.
and 12 pieces shank sanding drum in 3 diameters: 1/2", 3/8" and 1/4", 4 pieces per size.
Essential accessory - 120 grit commonest and standard size sanding bands use for smoothing surface and curved edges, polishing both soft and hard materials, like home improvement, artwork and woodworks.
Easy installation - drum mandrels with self-expanding rubber cushion, making the sanding bands close to the manderl firmly and acheiving better finishing.
in case the sanding band fall apart from the mandrel while using, please make sure the drum have been screwed tightly and wear closely to the sleeve.
Note: please wear professional safety glasses to protect your eyes, because maybe there are flying grits when the sanding drum turning at high speed.
the sanding drum will be attritted more quick on metal surface, please replace sleeves timely in order to achieving the better sanding effect.
Bonus - come with a free plastic box, convenient for store and fetch.

1-Inch dia by 3-Inch replacement sleeves are designed to be used with Big Horn 19540 9-Piece Super Long Sanding Drum Set (sold separately).
No-lap aluminum oxide resin bond sleeves | Excellent for sanding holes, edges, contours, and irregular shapes.
Made by Climax Metal Products | Made in USA.
Includes: 3 x 50 Grit - Coarse | 3 x 80 Grit - Medium | 3 x 120 Grit - Fine.

Merryland Mini Rotary Tool Accessory 184 Pcs 80# 1/2" Small Sanding Band with Mandrel, All in a Plastic Bag..
180pcs 80# 1/2" Sanding Band, 4pcs Sanding Drum Mandrel..
Shank diameter: 3.2 mm (1/8 inch), Adaptable for All Leading DIY Tool Brands..
Ideal for Manicures, Pedicures, Nut-carving, Wood, Metal, Plastic, Jade, Circuit Board and Other DIY Finishing and Working..
The Sanding Drum Will be Attritted More Quick on Metal Surface, Please Replace Sleeves Timely in Order to Achieving the Better Sanding Effect..

Pack of 18 oscillating spindle sander sleeves.
3 each of 1/2 inch, 3/4 inch,1 inch,1-1/2 inch, 2 inch and 3 inch sanding sleeves.
various diameters to fit your task perfectly, 4.5" in length.
Aluminum Oxide Abrasive providing high performance and durability.
Excellent for sanding, resurfacing or other types of metal and wood working.
Fitting most spindle sanders in the market: RYOBI, DELTA, GRIZZLY, ENLON, POWERTEC, WEN, Rockwell, Fox, Triton, and more.

Extra long rubber drum sanding set with each drum is mounted on a 1/4 inch shank which converts your drill or drill press into a mini spindle sander.
Great for Woodworking, Ideal for smoothing out rough round profile edges, contours and curved cuts.
Ideal for sanding and smoothing the inside surfaces of up to 2 inch deep drilled holes.
Cleans up saw marks from your jigsaw, bandsaw or holesaw and any other contour cut.
Includes 4x Rubber drum in 1/2 in, 3/4 in, 1 in, and 1-1/2 inches in diameter, with 12x Sanding sleeves in 60, 80 and 120 grit.