ReviewsSata Blade

Longdex SATA Power Extension Cable 5PCS 20cm SATA Power 15-Pin Male to 2 x 15P Female Y Splitter Cable Adapter

  • SATA power cables save the cost of upgrading existing power supplies to connect to new SATA drives. The cost-effective 2-Pack provides a spare SATA expansion power cable for new installations or maintenance..
  • SATA cables provide power for two serial ATA HDDs, SSDs, optical drives, DVD burners, and PCI cards, and provide a single connection through the computer power supply. The tightly matched drive SATA connector and the channel guide on the power connector provide Strong connection, no accidental disconnection..
  • The heavy-duty SATA splitter with 2 SATA 15-pin female connectors and 1 SATA 15-pin male is composed of 18 AWG flexible wires. When two SATA hard drives are connected to a power source, the performance is reliable..
  • The hard drive power cord supports 3.3V, 5V and 12V power supply voltages between SATA I, II, III drives and the power connection without degrading performance..
  • DIY or IT installers like to share the convenience of PSU connection when installing new internal components (such as a DVD burner). The 7.87-inch harness (excluding connectors) provides sufficient length for internal cable management in most configurations..
Check Stock

BEYIMEI PCIe 4X SATA Card 6 Ports,SATA III 6 Gbps Controller Expansion Card, ASM1166/SATA 3.0 Non-Raid,with 6 SATA Cables, (Support 6 SATA 3.0 Devices)

  • * Simple to Use : NO Driver required Plug and play, support 2.5 inch solid state drive, 2.5 inch mechanical hard drive, 2.5 inch Blu-ray drive, 3.5 inch mechanical hard drive, 3.5 inch Blu-ray drive, etc. It is widely applied as start-up disk, support hot swappable..
  • * SATA 3.0 & PCIE V3.0 : Support SATA transfer rate: SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps). Compliant with PCI-Express specification V3.0 and backward compatible with V2.0. PCI-Express X4 interface, and compatible with PCI-Express X4/X8/X16 slots(recommended to use under PCI-E 3.0, faster)..
  • * 6 Ports Adapter Card --- You could add 6 6Gbp/s SATA 3.0 devices to your computer with this PCIe SATA card.(4X bidirectional bandwidth theoretical speed up to 8GB/S) ,Support Intelligent Sleep - If you do not operate the computer for 3 minutes, the hard disk will enters an automatic sleep mode , and will automatically activates when rewriting data..
  • * Multiple Operating Systems Support : Adopt imported solution ASMedia ASM1166/SATA3 solution. It can support multiple operating systems:Compatible with Windows / 8 / 10 / synology /Ubuntu /Linux..
  • *Package includes 1 * PCIe SATA 3.0 controller card , 6 * SATA cable and 1x 15pin SATA power splitter cable,1* Standard Profile Bracket,1* Low Profile....
Check Stock

Adaptec 29160 PCI to Ultra160 SCSI Card Kit with EzSCSI Software

  • 1.The FS-S4-Pro is a PCI Express 3.0 X1 interface(8Gbps) to 4-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 4X Non-Raid SATA 3.0 Storage or AHCI Boot HDD/SSD on desktop PCs, Servers, MAC Pro and Network Attached Storage (NAS)..
  • 2.Selected the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
  • 3. Plug and Play on Windows Server 2019, 2016 ,2012R2, 2012, 2008R2, 2008, 2003R2, 2003(32/64), Windows XP, Vista, 7, 8.x,10 (32/64bit), MAC OS 10.4.x,10.5.x,10.6.x,10.7.x,10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems..
  • 4.Compliant with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on PCIE X1, X2, X4, X8, X16 slot..
  • 5.Warning: 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit (PSU) can provide 4X max SATA interface power supply for HDD/SSD. 3. Users must make sure PCs/Motherboards have at least one PCIE slot befo....
Check Stock

Cable Matters 3-Pack SATA III 6.0 Gbps SATA Cable 18 Inches (SATA Cable for SSD, SATA SSD Cable, SATA 3 Cables) Black

  • Motherboard mate SATA III cable is specifically designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives.
  • Blazing fast SATA III speeds up to 6 Gbps deliver superior performance for a custom gaming or RAID configuration.
  • Provides secure connections for fast and reliable file transfers.
  • Backwards compatible with SATA I, II, III hard drives.
  • Low profile SATA data cable has a flexible jacket to allow an efficient and organized installation in tight computer cases.
  • Bright cerise colored cable provides easy identification when troubleshooting.
  • Cost-effective 3 pack SATA cables provides spare or replacement hard drive cable for a last minute installation or to fix troublesome connection problems.
  • Compatible with popular SATA equipped devices such as: 24x DVD-RW Serial-ATA Internal Optical Drive, Crucial MX100 BX100 MX200 SATA Solid State Drive, Kingston240GB SSD V300 SATA 3 Solid State Drive, LG Electronics 14x Internal BDXL Blu-Ray Burner Rewriter, Samsung 850 EVO SSD 850 Pro SSD, Seagate 3TB Desktop HDD SATA 6Gb/s 3.5-Inch Internal Bare Drive, Extreme PRO 240GB, SIIG DP SATA 4-Port Hybrid PCIe, WD Black Performance Desktop Hard Drive, WD Green Internal Hard Drive.
Check Stock

Cable Matters 3-Pack SATA III 6.0 Gbps SATA Cable 24 Inches (SATA Cable for SSD, SATA SSD Cable, SATA 3 Cables) Black

  • Motherboard mate SATA III cable is specifically designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives.
  • Blazing fast SATA III speeds up to 6 Gbps deliver superior performance for a custom gaming or RAID configuration.
  • Provides secure connections for fast and reliable file transfers.
  • Backwards compatible with SATA I, II, III hard drives.
  • Low profile SATA data cable has a flexible jacket to allow an efficient and organized installation in tight computer cases.
  • Bright cerise colored cable provides easy identification when troubleshooting.
  • Cost-effective 3 pack SATA cables provides spare or replacement hard drive cable for a last minute installation or to fix troublesome connection problems.
  • Compatible with popular SATA equipped devices such as: 24x DVD-RW Serial-ATA Internal Optical Drive, Crucial MX100 BX100 MX200 SATA Solid State Drive, Kingston240GB SSD V300 SATA 3 Solid State Drive, LG Electronics 14x Internal BDXL Blu-Ray Burner Rewriter, Samsung 850 EVO SSD 850 Pro SSD, Seagate 3TB Desktop HDD SATA 6Gb/s 3.5-Inch Internal Bare Drive, Extreme PRO 240GB, SIIG DP SATA 4-Port Hybrid PCIe, WD Black Performance Desktop Hard Drive, WD Green Internal Hard Drive.
Check Stock

BENFEI SATA to Molex, 3 Pack 4 Pin Molex to SATA Power Cable - 10 Inches

  • FLEXIBLE SATA POWER CABLE connects the latest Serial ATA hard drives or optical drives to a power supply with legacy Molex LP4 ports.
  • Male to Female Molex to SATA cable with straight connectors is the perfect 10 inch length for internal cable management.
  • COST-EFFECTIVE 3-PACK of hard drive power cables provides a spare or replacement SATA to Molex cable when upgrading your computer.
  • IDEAL SOLUTION for the DIY computer builder or IT tech repair when installing new or replacement SATA hard drives or DVD drives to a power supply that only has Molex power ports.
  • RECYCLE LEGACY EQUIPMENT to connect new SATA HDDs and optical drives to older power supplies with 4 pin Molex ports.
  • COMPATIBLE with 5V SATA devices connecting to 12V ATX power supplies.
  • Sample compatibility list includes Antec VP-450W Power Supply, ASUS 24x DVD-RS serial-ATA internal optical drive, ASUS DVD SATA Supermulti Burner, Coolmax 500W Power Supply, Cooler Master Elite 460W Power Supply, Crucial 256GB SATA 2.5" Internal SSD, EVGA 430W Power Supply, Intel 520 Series 120GB SATA 2.5" SSD, Kingston Digital 120GB ....
Check Stock

Qphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166

  • [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
  • [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
  • [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
  • [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
  • [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.
Check Stock

SATA Card 4 Port with 4 SATA Cables, 6 Gbps SATA 3.0 Controller PCI Express Expression Card with Low Profile Bracket Support 4 SATA 3.0 Devices

  • ▶【10 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 10 SATA 3.0 interfaces and supports the simultaneous connection of 10 SATA hard disks, the transfer speeds up to 6Gbps.
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, can be used on PCIe X4/X8/X16 card slots, compatible with most size chassis on the market.
  • ▶【80TB Expansion】: 10 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1166 Chipset, improve this card more stable and compatible.
  • ▶【Supports RAID Mode】: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux.
  • ▶【What You Get】 : 1 x PCIe to SATA 3.0 10-port controller card, 10 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock

smartelf PCIe X1 SATA III Card 6 Ports ASM1166 Chip, SATA 3.0 6Gbps PCIE Controller Expansion Card Adapter with 6 SATA Cables+Thin Bracket,Non Raid

  • [ PCIe 6-Ports SATA 3.0 Expansion Card ] The 6-port SATA control card based on ASM1166 chip, It can add six SATA 3.0 devices （The max transport speed can reach 6Gbps ).Backward compatible with SATA 1.0 and SATA 2.0..
  • [ Wide Compatibility ] Our 6-port PCIE 1X SATA 3.0 card are suitable for PCIe X1/X4/X8/X16 card slots.
  • it is compatible with multiple operating systems such as Windows/ 8/10/synology/Ubuntu/Linux, and suitable for 99% of the case size on the market..
  • [ High Quality PCIe SATA Card ] This 6-port PCIe SATA III controller card is non-RAID and data can be protected by the operating system. High-performance heat sink, can withstand high temperature for a long time. High-quality slots and chips increase the durability and stability of this card. The 3 upgraded FP solid capacitors make the power supply more reliable and safe..
  • [ Support ACHI 1.0 Mode ] When your PC’s SSD/HDD is in AHCI boot mode, you can directly insert the hard drive into this sata card, no driver needed, just plug and play.(Note: please make sure that the PC’s SSD/HDD is in AHCI boot mode, otherwise a blue screen will be reported.).
  • [ What You Get ] 1* PCIe to SATA III 6-port expansion card.
Check Stock

FIDECO SATA/IDE to USB 3.0 Adapter, Hard Drive Adapter Cable for Universal 2.5/3.5 Inch IDE/SATA External HDD SSD, 5.25-Inch DVD-ROM/CD-ROM/CD-RW, Offline One Touch Clone, Support 16TB (Cable PL06)

  • 【Wide Compatibility】FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously..
  • 【Offline Clone】FIDECO hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
  • 【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
  • 【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
  • 【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer tech....
Check Stock

QIVYNSRY 3PACK SATA Cable III 3 Pack 6Gbps Straight HDD SDD Data Cable with Locking Latch 50cm 18 Inch for SATA HDD, SSD, CD Driver, CD Writer, White

  • ★Data High-speed Transmission:only 5 seconds to transfer a 1GB file..
  • ★Cost-effective 3 Pack Combo: 3 Pack White SATA 3 cable is a cost effective way to provide replacement or spare for different SATA systems or for RAID configuration..
  • ★SATA 3 cable is designed to connect motherboards and host controllers to internal Serial SATA hard drives and DVD drives, quickly upgrading your computer for expanded storage..
  • ★6 Gbps Fast Data Transfer: The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II..
  • ★Secure Connection: Locking latch on each end of the cable to ensure secure connections for fast and reliable file transfer. What You Get: QIVYNSRY SATA 3 cable x3, 18-month warranty and lifetime friendly customer service..
Check Stock