ReviewsSata Ports

ASRock Intel Avoton C2750 2.4GHz/DDR3/SATA3/V&2GbE/Mini-ITX Motherboard and CPU Combo C2750D4I Color Box

  • CPU (Included): Intel Avoton C2750 Processor (2.4GHz, Octa-Core).
  • Memory: 4x 240pin DDR3-1600/1333 DIMM Slots, Dual Channel, ECC, Unbuffered, Max Capacity Of 64GB.
  • Ports: 3x USB 2.0 Ports (2 rear, 2 via header controlled by USB_SEL1 and USB_SEL2 jumper), 1x VGA Port, 1x Serial Port, 2x RJ45 LAN Ports, 1x RJ45....
Check Stock

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422)

  • Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCIe.
  • 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports / PCIe.
  • 2-Slot PCI Express SATA M.2 RAID Card / SATA 3 Controller Host Card Adapter.
  • PCIe SATA Card for almost all SATA M.2 solid-state drives plus port multiplier up to 7 drives.
  • Storage controller supports hardware RAID / NCQ / HybridDrives / SATA3 6Gbps.
  • Perfect for data recovery & backup / Improves the storage & performance of a PC.
Check Stock

Intel Integrated RAID Module Storage Controller RMS25KB040

  • This RAID controller has four internal SAS/SATA ports and uses a x8 or wider PCI Express* server board slot.1.2 Operating System Support Supports SAS/SATA devices at speeds up to 300 MB/second per port Supports the SATA II protocol over SAS transp.
  • Contains four internal SAS/SATA ports Supports up to 8 SAS/SATA II devices via expanders Supports up to 64 virtual disks Supports up to 8 arrays Supports RAID levels 0, 1, 5, 6, 10, 50, and 60 Hardware exclusive OR (XOR) assistance.
  • Online capacity expansion Online RAID level migration Physical drive roaming RAID controller migration Fast virtual drive initialization Hot-spare drive configuration, both private and global.
  • SATA drive hot-plug Staggered spin-up Native command queuing Support for SMART* Auto rebuild Variable data stripe size configured per virtual drive.
  • 128 MB of ECC DDR2 667 MHz SDRAM integrated on the controller Read and write cache policy SES2 intelligent enclosure support PCI hot-plug support Background media test (patrol read) Background data integrity test.
Check Stock

Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches

  • ...cient length for internal cable management to minimize airflow impact in most configurations.
  • Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
  • Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
  • Universal compatibility with computer power supplies with SATA connectors and popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, 24x DVD-RW Serial-ATA Internal OEM Optical Drive, Crucial MX100 256GB SATA 2.5-Inch Internal Solid State Drive, Inateck PCI-E to USB 3.0 5-Port PCI Express Card, Inateck Superspeed 7 Ports PCI-E to USB 3.0 Expansion Card, Inateck Superspeed 4 Ports PCI-E to USB 3.0 Expansion Card.
Check Stock

SuperMicro M11SDV-8C+-LN4F Mini-ITX Motherboard with EPYC 3251 SoC Processor

  • Memory: 4x 204pin DDR3-1600 SODIMM Slots.
  • Slots: 1x PCI-Express 3.0 x16 Slot, 1x PCI-Express 2.0 x8, 1x PCI-E 2.0 x4.
  • Ports: 4x USB 3.0 ports, 6x USB 2.0 Ports, 1x VGA Port, 2x Serial Ports, 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port.
Check Stock

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

ASRock ATX DDR3 1333 LGA 1150 Motherboards FATAL1TY Z97 Killer

  • Supports the 5th/ New 4th/ 4th Generation Intel Core i7/i5/i3/ Pentium/ Celeron Processors.
  • Memory: 4x DDR3-3000+(OC)/ 2933(OC)/ 2800(OC)/ 2400(OC)/ 2133(OC)/ 1866(OC)/ 1600/ 1333/ 1066 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 32GB.
  • Slots: 1x PCI-Express 3.0 x16 Slot, 1x PCI-Express 2.0 x16 Slot (runs at x4), 2x PCI-Express 2.0 x1 Slots, 2x PCI Slots.
  • SATA: 6x SATA3 Ports, Support RAID 0, 1, 5, 10.
  • Ports: 6x USB 3.0 Ports (4 rear, 2 via headers), 6x USB 2.0 Ports (3 rear, 2 via headers, 1 Fatal1ty Mouse Port), 1x PS/2 Mouse/Keyboard Combo Port, 1x VGA Port, 1x DVI-D Port, 1x HDMI Port, 1x Optical S/PDIF Out, 1x RJ45 LAN Port, Audio I/O Jacks.
Check Stock

GIGABYTE Micro ATX DDR3 1333 LGA 1150 Motherboards GA-H81M-S1

  • Memory: 2x DDR3-1600/1333 DIMM Slots, Dual Channel, Non-ECC, Max Capacity of 16GB.
  • Slots: 1x PCI-Express x16 Slot, 2x PCI-Express x1 Slots.
Check Stock

2 Port eSATA3.0 or 2 Port SATA3.0 Non-Raid Controller Card, X1, with 2 SATA Cable, Support SSD and HDD

  • Add 2 eSATA III or 2 SATA III 6Gbps ports to a computer through a PCI Express slot (only one of them can be used, the default SATA interface is valid) to improve your system performance and expand overall internal storage. (NO-Support Raid)..
  • The 4 ports SATA controller base on ASMedia ASM1061 chip, more stable and wider compatible..
  • Compliant with SATA3.0 standards, backward compatible with SATA1.0 and SATA2.0. Support PCIe1.0, 2.0, 3.0 protocol on motherbaord PCIe X1, X2, X4, X8, X16 slot..
  • Full height and low profile bracket included..
  • Supports Windows 7/8/10, Windows Server 2008 R2/2012 R2/2016/2019, RHEL/CentOS 6/7/8, Ubuntu 16/18/20/21, SUES 11/12/15, VMware ESXi 5/6/7, Linux..
Check Stock

SupaHub SATA Card 8 Port, Non Raid SATA Expansion Card for SATA III 6G Hard Drives for Desktop, Includes 8 SATA Cables and 2 SATA Splitter Cables

  • Non-Raid 8 Ports SATA Card: This PCIE SATA card allows you to add 8 SATA 3.0 6Gbps devices to your computer. The BIOS of DELL and Lenovo motherboards will shield the third-party adapter card, do not order this SATA controller card if you use the motherboards of these two brands..
  • Two chips: The use of these two chips enhances heat dissipation, durable high temperature resistance, and more stable operation..
  • Operation Systems & Driver: Supports Windows 7/8/10. Please install the drivers, otherwise some problems may occur such as "does not work", "Only some ports work", "Only a few indicators are on", "The slot is empty” or “It’s incompatible”. Contact us if you need for the link to download the driver..
  • Interfaces: Supports PCI-E x1, x4, x8, x16. PCI slot is incompatible. You should power off the SATA PCIe card before inserting it into the motherboard or removing it..
  • Package includes: 1* 8-Port PCIe SATA Card.
Check Stock

LSI Logic LSI00154 LSI20320IE 1CH U320 SCSI PCI Express 1 Int 1 Ext Channel Lp Leadfree Controller

  • ▶【10 Ports SATA 3.0 Adapter Card】: With this PCIe SATA card, you can add 10 SATA 3.0 6Gbps devices to your computer (No need to install a driver and contact the seller if need the driver).
  • ▶【80TB Expansion】: 10 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1166 Chipset, improve this card more stable and compatible.
  • ▶【Supports 】: Supports Windows XP/8/10 / MAC / NAS / Ubuntu(Not recommended to use win 7, it may be stuck).
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, can be used on PCIe X4/X8/X16 card slots, compatible with most size chassis on the market.
  • ▶【Note】: The 10-port does not support RAID. The RAID in INTEL is only for original SATA. It is an expansion card that cannot support third-party chips..
Check Stock