ReviewsSaw Fences And Guide Rails

VEVOR Table Saw Fence System, 37'×57' Classic Table Saw Fence Rail, Metric/Imperial Scale, Adjustable Hole Saw Fence System, w/Front Guide Bar Table Saw Fence, Tablesaw Fence Slide for Easy Gliding

  • Heavy-Duty Rip Fence: The miter saw fence system features a self-adhesive scale and magnified cursor to provide fast and accurate fence positioning. The self-stick measuring tape mounts directly to the fence and features high visibility numerals and in both metric and imperial scales..
  • Sturdy and Secure: Simple cam lever action locks the fence solidly in position, and torsion box design means no deflections while guiding wood. The paint baking process is wearing resistance and gloss..
  • Smooth Sliding: Long rails provide a huge 37-Inch maximum rip to the right of the blade. Adjustable slider pads ensure a precise fit and smooth adjustments with minimal effort..
  • Complete Tools: This table saw sled is easy to install and set up on any brand of saw. It comes with a guiding rule, front guide rail and rear guide rail, and a set of accessories to facilitate your work..
  • Extensive Uses: Table saw fence system and rail fit a variety of saws. The Steel construction Ensures that the fence is parallel to the blade. It offers quick ripping and straight cuts..
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • ...to accommodate different profiles. The abrasive belt can prevent your stock from sliding or drifting in response. This, coupled with the heavy press switch, can keep your stock firmly in place..
  • REFERENCE: Transparent guide runs along the fence 51mm (2) above the table, to enable compatibility with most router table fences and prevent cutting into the sled. Using a fence instead of a miter bar installed at the bottom means that you will always be parallel to the router table fence. This is a significant time saving advantage, as you will no longer need to constantly readjust the router table fence..
Check Stock

Chainsaw Sharpener, Portable Chain Saw Sharpening Tool Set, Sharpener File Table, Quick Sharpening, Suitable for All Kinds of Chain Saws and Electric Saws (1pcs)

  • ★ CONVENIENT AND FAST SHARPENING: the new chain saw tooth sharpener provides a simple and quick way to sharpen the chain. The chainsaw can clean the blunt chain again in 2-4 seconds. The chain saw sharpening tool is light in weight, easy to carry, easy to use outdoors, and protects your hands from injury..
  • ★ HIGH-QUALITY MATERIALS: Saw chain sharpeners made of high-quality alloys, lightweight and durable chain saw sharpeners are suitable for most saw chains on the market..
  • ★ EASY TO USE: As easy to use as a pencil sharpener.
  • just fix the clamp on the rod, position the pawl on the tooth, insert the burr into the guide sleeve, and turn the handle..
  • ★ EASY TO INSTALL AND USE: The chain saw sharpening tool is installed in the chain and can be installed and used at any time, allowing your chain to sharpen the knife in a short time. Keep the oil on the chains and rails to reduce friction and extend service life..
  • ★ PRECISE MAINTENANCE: every time you grind your teeth, you only need to pull the chain. Precise sharpening to ensure that every tooth is repaired! Equipped with spare three grindstone replacement, convenient for timely replacement and maintenance.
Check Stock

SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser

  • Laser cutline guide for fast and accurate cuts.
  • 9 positive stops for setting common miter angles.
  • Table extension with left/right extension rails for long, large work pieces.
  • Quick-mount system for quick and easy setup on SKIL miter saw stand (3302-02).
Check Stock

Bora NGX Saw Plate Includes 55\ Non-Chip Strip That Elimates Tear Out, Designed for Straight Cuts While Using The NGX Clamp Edge System, 544001

  • Fixed Center Molded Channel Reduces Blade Offset And Guesswork.
  • Self-Adhesive Non-Chip Strip Attaches To The Bottom Of Your Ngx Clamp Edge And Reduces Top Edge Tear-Out For A Smooth Finish.
  • Quick-Release Clamps Are Adjustable So Your Saw Goes On And Off The Plate Effortlessly.
  • Aluminum Guide Rails Position Your Saw Accurately Every Time.
Check Stock

BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts Includes 50-inch Clamp Edge 50-inch Extension Pro Saw Plate Track Clamps Non-Chip Strip 544500

  • Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
  • 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension..
  • Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts..
  • Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.
Check Stock

Vega PRO 50 Table Saw Fence System 42-Inch Fence Bar 50-Inch to Right

  • Uses existing hole pattern for Delta Unisaw, Contractor, powermatic 66, Sears 10-inch saw.
  • Fence mounting system allows full adjustment for accuracy.
  • Guide rails supported by brackets, 2-1/2-inch fence height.
Check Stock

Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws

  • ...rials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock..
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through..
Check Stock

UpStart Components 2-Pack 16-Inch Chainsaw Guide Bar Replacement for Stihl MS 170 - (16', 3/8'.050', 55 Drive Links)

  • UpStart Components 16-Inch Chainsaw Guide Bar Replacement for Stihl MS 170 - (Single Rivet, 16 inch Length, 3/8" Low Profile Pitch, .050" Gauge, 55 Drive Links, 7 Sprocket Nose Tooth).
  • Better control for less kickback and increased safety. Ideal for professionals working in demanding conditions..
  • Made of durable, lightweight materials for high performance with minimum vibration..
  • Easily replaces damaged guide rails to extend the life of your chainsaw..
  • UpStart Components Brand. Please Note: The same saw can have different bar lengths so ensure you confirm the pitch, gauge, & drive links on your current bar. Not all bars take the same amount of links..
Check Stock

Chainsaw Chain Sharpening Jig, Portable Hand Crank Chainsaw Blade Sharpener Chainsaw Sharpening Kit Suitable for 4"-22" Chain Saws & Electric Saws, Keep Your Chain Saw in Top Shape

  • ...Lightweight and easy to carry, the chain saw sharpening tool is easy to use outdoors.Use the chainsaw sharpener to make your work more time-saving and labor-saving!.
  • 【Easy to Use】 - It is as easy to use as a pencil sharpener.
  • just set the clamp to the rod, position the pawl on the tooth, insert the burr into the guide sleeve, and turn the handle.Use it to precisely sharpen the chain of a chain saw to sharpen the chain and make gardening work smoother. Made of high-quality alloy material, it is durable and more sturdy..
  • 【Portable sharpener】 The previous sharpener is too bulky to take into the field, but this portable chainsaw sharpener weighs just 260g. It’s handy enough to take anywhere. Perfect for when you don’t have access to a power source and don’t want to carry any heavy tools..
  • 【Easy to Install】 - The chain saw shaperener tool ​is installed in the sharpener and can be installed and used at any time so that your chain can be sharpened in a short time. Keep oil on the chain and rails to reduce friction and extend service life..
  • 【Precise Design & Perfect Choice】 - Every time you grind a tooth, you only need to pull the chain.The precise sharpening can ensure that every tooth is repaired!Standard 30° sharpened front angle....
Check Stock

Kreg ACS2000 Adaptive Cutting System, Saw + Guide Track Kit

  • Premium Home Improvement Tools: The plunge saw and saw guide combine into an adaptive cutting tool.
  • Woodworking Plunge Saw: Left-bladed circular saw has a retracting blade that can start cutting anywhere on materials.
  • Straight Edge Guide: The aluminum saw guide track ensures precise, straight, and splinter-free cuts.
  • Secure Workshop Accessories: The anti-slip strips on the track saw guide secure material without clamps.
  • Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome.
Check Stock