ReviewsSaw Setting Dial Gauge

BOSCH Digital Level, 24 Inch. GIM 60

DUAL FUNCTIONS - tilt/angle gauge to set and also check relative angles between two surfaces using Alternate Zero function.
PRECISION & EASY RE-CALIBRATION by user back to factory setting with no special fixture.
RESOLUTION: ±0.05° (0° & 90°), ±0.2° other angles, switchable display between (°), slope (%), mm/M, inch/FT.
STRONG MAGNETIC BASE: securely attach to fences, saw blade & base, and other metallic surfaces.
improve accuracy with precise displays in degrees, In/Ft, mm/M, % slope.
Auto invert display when gauge is upside down.
Measurement Range 0° ~ +/- 90° x 4 (360°) with full temperature compensation ensuring accuracy of measurements within 32°F to +122°F.

Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....

Check Stock

MOTOR METER RACING EVO Series Digital 6 Gauge Set Includes GPS Sensor mounting kit

...cification Speedometer & Tachometer: Standard 3-3/8" (85mm) dial and 3-3/4" (95mm) opening. EVO Gauge Set requires any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Red, Blue, White & Green to be select as displaying light color, brightness adjustment.
4 types of dimmer setting where the color can be shift according to users' needs in different conditions..
Specification Water Temp, Volt, Oil Pressure & Fuel Gauge: Standard 2"(52mm) dial 2-1/16"(52.4mm) opening. Red & Blue to be select as displaying light color, brightness adjustment..
Features: EVO 6 Gauge Set applying the latest LCD movement technology with the display of precision. It is designed for in-dash usage, while suitable on-dash mounting cups available to be ordered — flat clear acrylic lens with plastic housing, designed to be installed with ease..
Packaged: Speedometer GPS sensor and convector, fuel level sender, water temp sensor (Thread size: 1/8 NPT), oil pressure sensor (Thread size: 1/8 NPT), 3-3/8" mounting stand (2 pcs), wiring harness, installation manual..

Check Stock

General International 16\ Scroll Saw - 1.2A Variable Speed Woodworking Saw with LED Light & Flexible Shaft - BT8007

PRECISION CUTTING - Up-front dial allows setting the exact cutting speed choice for processing different materials, Cast aluminum work table tilts 0° to 45° left with up-front locking knob and bevel scale.
INNOVATIVE DESIGN - "First to market" and design Flex-neck LED work light, Patented blade holder accepts both standard 5 in. pin-end or plain-end (pinless) scroll saw blades, Side storage compartment on the housing for spare blades and wrenches.
KEEP THE JOBSITE CLEAN & SAFE - Saw dust collection port for standard 1-1/4 in. hose, Saw dust blower keeps the cut line clear. Safety on/off switch wth removable security key: 2 pinned blades, 3mm blade change T-style hex key, 4 mm adjustment hex key.
HIGH-POWERED CUTTING - 144 Watt, 120V~60Hz, Amp: 1.2, No-load Variable Speed: 400-1600rpm, Easy access motor brushes.
CUTTING FEATURES - Max. cutting capacity (throat depth): 16 in., Max. cutting thickness: 003e2 in. at 90°, Stroke Length: 5/8 in..

Check Stock

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge 18 Inch

MAKE ACCURATE CUTS: The DCT | Table Saw Miter Fence with Miter Bar Gauge & Flip Stop offers safety and accuracy when cutting or sanding precise,....
USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact....
NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts.
Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm)....
BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip....
PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge....

Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....

Check Stock

Auto Meter 7004 InVision Direct Fit Digital Dash LCD 73-87 Chevy/GMC Full Size Truck

...lt, Oil Pressure & Fuel Gauge): Standard 2"(52mm) Dial 2-1/16"(52.4mm) Opening. EVO Gauge Set Requires any 1 to 9 Cylinder Engines Only - Compatible with 12-volt Negative Ground Systems.
Features: 4 Color Mode, 6 Level Brightness Adjustment.
4 Types of Dimmer Setting where the Color Can be Shift According to Users' Needs in Different Conditions. It is Designed for In-dash Usage, While Suitable On-dash Mounting Cups Available to be Ordered - Flat Clear Acrylic Lens with Plastic Housing, Designed to be Installed with Ease.
Packaged: Speedometer GPS Sensor, Fuel Level Sender, Water Temp Sensor (Thread size: 1/8 NPT), Oil Pressure Sensor (Thread size: 1/8 NPT), 3-3/8" Mounting Stand (2 pcs), Daisy Chain, Wiring Harness, Installation Manual.
Warranty: One-year for Non-human Factor Damage and Free Lifetime Technical Support.

Check Stock

WYNNsky 80mm Digital Height Gauge Magnetic Mini Height Gauge Depth Gauge for Saw Table Thickness Gauge with Magnetic Self Standing for Woodworking Home Decoration

...is gauge possesses a 0-80mm measuring range and hole depth measuring 50mm, with a 60mm wide aperture. To extend the range, simply attach the extension probe. Connect the probe to the other end and it becomes a depth scale..
There are plenty of uses for this economically-priced digital gauge. It’s self-standing for setting the cutter depth on router tables and saws tables, as well as being low-profiles enough for adjusting the fence position on band saws. Other functions including checking the depth of grooves, establishing the depth and height on a spindle moulder, positioning the depth of a saw blade, setting planer blades.

Check Stock

BOSCH GTS18V-08N PROFACTOR™ 18V 8-1/4 In. Portable Table Saw (Bare Tool)

PROFACTOR PERFORMANCE – delivers professional power in an 8-1/4 In. portable table saw.
PROFESSIONAL CAPACITY – delivers the power of a corded table saw plugged in at the workshop with true mobility.
CONVENIENT PORTABILITY – features a transportable, tough single-hand carry design that is ideal for mobility around the jobsite.
BITURBO BRUSHLESS TECHNOLOGY – featuring a brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by CORE18V PROFACTOR batteries (sold separately).
BITURBO BRUSHLESS MOTOR – delivers a powerful 5,500 rpm with corded-like performance.
CUTTING ACCURACY – allows for easy adjustments with the rack-and-pinion dial, without having to tap and knock the fence into place.
LARGE CAPACITY – features a 25 In. ripping capacity right of the blade while being able to tackle 2x materials.
ON-TOOL STORAGE – stores rip fence, miter gauge, Smart Guard System and push stick.
RESTART PROTECTION – helps prevent accidental tool startup when switching batteries.
OVERLOAD PROTECTION – reduces the risk of the motor overloading or overheating.

Check Stock

IRWIN 10-Inch Miter Saw Blade, Classic Series, Steel Table (11870)

Precision-ground circular saw teeth for smooth, accurate cuts.
Fully-hardened circular saw blade plate runs truer, longer.
Heavy-gauge, high-carbon steel construction provides extended circular saw blade life.
10" blade length with 5/8" arbor and 0.09" kerf.

Check Stock

Dial Indicator Bore Gage,35~50mm Precision Measuring Tool Professional Precision Inch Dial Bore Gauge Set,Measuring Range Measuring Tools(35-50mm)

【Aluminum Alloy Dial Bore Gauge】Made of aluminum alloy material ,rust and corrosion resistant..
【Dial Bore Gauge Set】A package including a dial bore gauge and measuring tip..
【 0.01mm】High accuracy ,the resolution of the gauge is 0.01mm..
【35~50mm Precision Measuring Tool】The dial bore gauge can measure a bore of 35~50mm..
【Stable Indicator Bore Gauge】Convenient to use,good stability and saves effort..

Check Stock