ReviewsSaws Saw Blade

Milescraft 14000713 Saw Guide for Circular and Jig Saws

  • Incremental trim feature makes tool-free adjustments by 1/16 inch.
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws.
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws.
  • Cuts circles from 4″ to 19″ in diameter.
  • 4 metal bars and special clips accommodate most circular and jig saws.
Check Stock

WoodRiver Adjustable Fence Clamps, 2 Piece

  • This fence will improve your band saw instantly. Easy to adjust for blade lead with angle bracket design. Will fit most 14" band saws with tables up to about 16" square..
  • Bolts directly to existing holes in the 14" Delta, Jet, Ridgid, Powermatic (without extension table) & Porter Cable. May be able to be attached to other 14" band saws by drilling four holes, see instruction sheet..
  • The most rigid fence available. Two separate fence position locks at both ends and two separate blade lead locks as well..
  • See the HD Band Saw Circle Jigs - 7286-7290 too. Clamps to any band saw to cut circles or arcs from 3" diameter up to 189.
Check Stock

Woodworking Thin Board Cutting Guide Tools, Thin Table Saw Jig Fast Cutting Limit Thin-Rip Tablesaw T Track Adjustable Positioning Fixing Tool for Cutting Thin Board Table Saw Router Table Band Saw

  • ❣ MOST STABLE AND CONVENIENT TO USE: The table saw accessory that delivers consistent thin strips without binding, burning or kickback. The Thin Rip Guide works on the offcut side of the blade, making it much safer than methods where the strip is between the saw blade and the fence..
  • ❣ EASY TO USE: Woodworking table saws jig are easy to use and work on most table saws. Positioned on the off-cut side and a few inches in front of the blade, the table saw jip provides a bump stop that delivers consistent dimension strips. It uses a pair of bearings for the contact point. Easily calibrated scales in both inch and metric graduations make it simple to get just the size you want for your strips..
  • ❣ WIDELY USE: From portable job site saws to large cabinet shop saws, the thin table saw jip guide works with any saw that has a 3/8 ” x 3/4″ miter slot with a “T” profile. Strips as thin as 1/32″ and up to 1-1/4″ can be cut, depending upon the spacing between the miter slot and the blade..
  • ❣ DURABLE MATERIAL:The body of the woodworking thin board cutting guide tools guide is machined from a solid billet of top-quality aluminum and anodized for corrosion protection. All other components are either stainless steel or other corrosion resistant m....
Check Stock

SUIZAN Japanese Folding Dozuki Dovetail Pull Saw 9.5 Inch, Hand Saw for Woodworking

  • ... DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.
  • For Cross Cut, Blade Length: 9.5"(240mm), Blade Thickness: 0.012"(0.3mm), TPI: 25(1.0mm), Kerf Width: 0.02"(0.5mm), Overall Length: 22.5"(57cm), Folding Size: 12.5"(32cm).
Check Stock

GALAX PRO Circular Saw Blade 7 1/4\(185MM) 24 Tooth and 48 Tooth Tungsten Carbide Tipped Circular Wood Cutting Saw Blade with 5/8\(16mm) Arbor for Wood Cutting(Pack of 2)

  • This TCT Circular saw baldes are designed as general cross cut blades. The 24 tooth blade is used for frame cutting of soft woods, pressure treated lumber and MDF.
  • The 40 tooth blade is best used for smooth finely finished cuts in plywood.
  • Cutting blade is made of tungsten carbide tip.
  • Tungsten carbide teeth provide excellent wear and heat resistance.
  • Positive cutting angle which provides fast and efficient removal of chips and swarf, cutting smoothly.
  • Delivers accuracy and resists bending and deflection for true cuts.
  •  Heat expansion slots allow the blade rim to expand and contract without warping for straight and accurate cuts and minimize heat and vibration.
  • 7 1/4 inch circular saw blades are ideal set for all your cutting needs.
  •  Both blades have a 5/8 inch arbor to fit circular saws and miter saws that require this size blade.
  •  Also suitable for GALAX PRO GP76331 and GPL12367 circular saw.
  • What you get: 1* 24T tungsten carbide tipped circular wood cutting saw blade, 1* 48T tungsten carbide tipped circular wood cutting saw blade, 1* Information Card.
Check Stock

Virginia Abrasives Ultra Value Concrete Diamond Blade - Wet or Dry Concrete Tools/Masonry Tools, 14\ Saw Blades, Cutting Tool for High Speed & Walk Behind Saw, General Purpose Ceramic Blade, 14 inches

  • DIAMOND BLADE CUTTING WHEEL: Virginia Abrasives' diamond blades are the ideal concrete cutting blade for High-Speed Saws, Walk Behind Saws, and Cut-Off Saws due to their high welding strength. With a significantly stronger bond between the segment and core, our diamond saw blades are sure to offer a longer life span..
  • LASER WELDED SEGMENTS: We ensure that your tough jobs are completed quickly with our industrial diamond blade 14 inch cutter. With laser-welded segments, it extends the life of every saw diamond blade while performing to its utmost ability..
  • HIGH-LEVEL PRECISION: As one tries to reduce the strain on the concrete structure, our 14 inch concrete saw blade makes sure to provide a high-performing smooth cut. Freely choose our diamond concrete saw for easy high-speed cutting on your next project..
  • DURABLE QUALITY: Our masonry blade is made with an industrial diamond that can outperform regular blades. It is made using a circular steel cutting disc with huge 12mm segments on the outer edge that will maintain precision grinding performance for a long time..
  • OUR STORY: Virginia Abrasives was founded in the early 1970s during a period of hard rock garnet mining in the Adirondack Mountains of New York. Over time, the company's markets and product lin....
Check Stock

Japanese Saw Hand Saw Ryoba Double Edge Pull Saw Interchangeable Flush Cut Saw 10 Inch Flexible Blade Handsaw for Woodworking orange

  • ⚒️ Japanese Saw 22-1/2" Hand Flush Cut Ryoba Pull Saws Flexible Double Edge 10" Blade Impulse Hardened Steel Teeth for Woodworking..
  • ⚒️ The Pull Saw is made of SK5, quenched and tempered good toughness, stronger and more durable.Japanese saws cut materials via pulling, thus they....
  • ⚒️ The japanese razor saw 10" Double Edge Ryoba Hand Saw has a blade length of 10inch and a 12.5 inch Ergonomics TPR handle. In comparison to....
  • ⚒️ A fast, sturdy universal saw - ideal for deep cuts both across and with the grain - in the workshop or building site..
  • ⚒️ One side for ripping, the other for crosscutting, now you only need one saw for all general woodworking tasks..
Check Stock

Virginia Abrasives Ultra Value Concrete Diamond Blade - Wet or Dry Concrete Tools/Masonry Tools 14 Saw Blades Cutting Tool for High Speed & Walk Behind Saw General Purpose Ceramic Blade 14 inches

  • DIAMOND BLADE CUTTING WHEEL: Virginia Abrasives' diamond blades are the ideal concrete cutting blade for High-Speed Saws, Walk Behind Saws, and Cut-Off Saws due to their high welding strength. With a significantly stronger bond between the segment and core, our diamond saw blades are sure to offer a longer life span..
  • LASER WELDED SEGMENTS: We ensure that your tough jobs are completed quickly with our industrial diamond blade 14 inch cutter. With laser-welded segments, it extends the life of every saw diamond blade while performing to its utmost ability..
  • HIGH-LEVEL PRECISION: As one tries to reduce the strain on the concrete structure, our 14 inch concrete saw blade makes sure to provide a high-performing smooth cut. Freely choose our diamond concrete saw for easy high-speed cutting on your next project..
  • DURABLE QUALITY: Our masonry blade is made with an industrial diamond that can outperform regular blades. It is made using a circular steel cutting disc with huge 12mm segments on the outer edge that will maintain precision grinding performance for a long time..
  • OUR STORY: Virginia Abrasives was founded in the early 1970s during a period of hard rock garnet mining in the Adirondack Mountains of New York. Over time, the company's markets and product lin....
Check Stock

Bosch Professional Circular Saw Blade Standard for Wood (Wood, 85 X 15 X 1.1 mm, 20 Teeth, Accessory Cordless Circular Saw)

  • Maximised battery runtime thanks to the extra-thin cutting edge.
  • Clean cuts and precise results thanks to high-quality carbide teeth.
  • Reduced noise, fewer vibrations and less heat thanks to expansion slots.
  • The saw blade fits all common cordless plunge saws and hand-held circular saws as well as cordless metal saws.
  • Saw blade suitable for all types of wood and timber products.
Check Stock

Jones Stephens S49005 E-Z Stroke Pipe Saw 8” Pipe Saw

  • Hand Saw: This E-Z Stroke Pipe Saw is a convenient, lightweight hand saw with a comfortable ergonomic handle. It can easily be used to cut plastic,....
  • Pull-Stroke Saw: Jones Stephens’ E-Z Stroke Pipe Saw is one of the most convenient and easy-to-use cutting saws. With razor sharp teeth, the....
  • Flexible Blade: The saw features a highly flexible blade that allows for flush cutting without marring adjacent surfaces..
  • Razor Sharp Teeth: The tri-edge ground teeth cut through material like a knife, which makes this saw the go-to for all your cutting needs..
  • Replaceable Blade: If you need a smaller blade or your blade is dull or damaged, the orange handle accepts all Jones Stephens E-Z Stroke Saw blades.....
Check Stock

4.5 inch Circular Saw Blade, Firecore Segmented Diamond Saw Blade for Angle Grinder Dry or Wet Concrete Cutting Wheel Disc for Concrete Stone Brick Masonry Tile

  • SPECIFICATIONS: Firecore concrete saw blade has teeth with soldered diamond segments all around. Diameter: 4-1/2 Inch (115 mm).
  • Arbor: 7/8 Inch (22.23 mm) with 20 mm Adapter.
  • Segment Height: 0.276 Inch (7 mm). Suitable for Angle Grinders, Circular Saws, Masonry Saws, Tilesaw and Gas Cutoff Cutters..
  • FAST & SMOOTH CUTTING: Universal for dry or wet cutting. With Max 12,200 RPM, this diamond circular saw blade are produced specifically for use with general masonry materials such as concrete, roof tiles, stones, bricks and rocks..
  • INCREASED OPERATING TIME: Concrete blade for angle grinder heats up slower to prolong the operating time..
  • DURABLE: Made from high-quality superabrasive diamond, this cutting saw blade offers the best combination of cutting speed, long life and a low cost per cut..
  • WIDE APPLICATION: Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or work at your home studio, this circular saw blade tool is the perfect blade for you..
Check Stock