ReviewsScissor Trailer Jacks

Homeon Wheels Plastic Stabilizer Stack Jacks for RV, Travel Trailers, Pop-Up Camper, Cars or Boats,Can Support Up to 6610 lbs, Extends to 17 inches (4 Packs)

⚓ Durable, heavy duty pp material for strength..
⚓ Adjustable Height - RV stabilizer stack jacks may meet most people needs for Cars, Trailer, and RVs that can minimum to 11.42 inch,maximum to 15.75 inch. Capacity: camper leveling jacks can Support Up to 6610 lbs when all 4 PACKS in place ( ONE SINGLE MAX HOLDING 1651 LB, NOT EXCEED PLEASE ).
⚓ EASIER FOR STORAGE - The stackable design of Homeon Wheels trailer stabilizer jacks take up minimal storage space for RVs, pop-up camper or smaller trailer. It's convenient to help steady your travel trailer in the parking spot. Handy 4 pack allows for added stability and support.
⚓ Suitable for small sized vehicles(Car/Truck/Vehicle/RV/Trailer), pop-ups, trailers, campers motorhomes and RVs. Package comes with a set of (4) stack jacks and 1 T Level Aid as free of charge.
⚓ NOTES: Four Packed stack jacks need to be scattered around the wheels to stabilize the RV better. However, if you are not entirely satisfaction with your purchase for any reason, refund within 30 days for you. We also have Aluminum Stabilizer Stack Jacks, support up to 7936 lbs when heavier trailer in use. Please choose according to your needs, safe and secure..

Check Stock

1/2" Scissor Jack Adapter Drill Adapter for Use with 1/2 Inch Drive/Impact Drills/Ratchet or Standard Drive Sockets or 13/16 Inch Lug Wrench/Tire Iron Make Your Scissor Jacks Lifting Easier (1)

Updated Designed Scissor Jack Adapter: Bolt Length extended to 45mm. Compares with 40mm bolt, It will fits more scissor jacks..
Easily raise, lower and level your scissor jacks faster and more easily than ever. For use with 1/2" impact wrenches, drills or standard drive sockets. Labor saving !.
Suitable to most of loop type or double eyelet type scissor jacks in the market..
Made of very solid chrome vanadium steel. More Sturdy.

Check Stock

Lippert 191023 JT's Strong Arm Fifth-Wheel Jack Stabilizer Kit

ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis.
EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
COMPATIBILITY — This stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
FULLY EQUIPPED — Kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware.
RV fifth-wheel jack stabilizer kit comes complete with everything needed for DIY installation.
Designed to eliminate side-to-side and front-to-rear RV movement and shaking.
Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying.
The kit was designed for installation by your dealer or the do-it-yourself on fifth-wheel RVs with 58 inches or greater distance between the two front landing gear legs.

Check Stock

VIVOHOME Set of 2 Heavy Duty 26\ 5000 lbs Steel Scissor Jacks RV Trailer Stabilizer Leveling Jacks with Hand Crank for Truck SUV Sedan Coupe Vehicle Camper Jacks

MULTIPLE USES – The 2 leveling scissor jacks can support up to 5,000lbs individually, which can stabilize and level most RVs and cars for maintenance.
ADJUSTABLE SIZE – The extended height is 24 inches while the retracted height is 5 inches.
The retracted length is 26 inches and the width is 7.
This adjustable design is perfect for different kinds of maintenance situations.
Super easy to operate when adjusting with the speed handle.
PREMIUM MATERIALS – Made of a high-quality black Powder-Coated Finish, these scissor jacks are stable enough to keep the chassis steady on the road, helping to raise and lower the spare tire from the vehicle.
EXCELLENT DESIGN – Jacks are compact and portable and the 2 scissor jacks will not occupy too much space in the trunk of your car or in the garage.
With this useful product, people can greatly reduce the strength and effort needed when repairing your vehicle.
SAFE & RELIABLE – A useful product, the jack can be operated in narrow spaces and help you avoid finger injuries when working.
Keep your RV or your car steady and safe while you operate, it is a necessary tool for any garage.

Check Stock

Lippert 285325 24' Scissor Jack

DURABLE CONSTRUCTION — Built tough with a black, powder-coated finish and rust-inhibitive surface that allows it to take on the wear and tear of RV travel.
ECONOMICAL SOLUTION — Inexpensive and extremely reliable, this scissor jack kit is a must-have if you’re replacing an old or broken stabilizer jack.
EXTENSION RANGE — The scissor jack extends up to a maximum of 24” and retracts to 4-1/4” for compact storage when not in use.
SECURE INSTALL — Our scissor jack kits come complete with all mounting hardware needed for bolt-on installation on your 5th wheel, travel trailer or cargo/utility trailer .
DEPENDABLE STRENGTH — This scissor jack is rated to support up to a 5,000 lb. load capacity per jack .

Check Stock

SteadyFast Made in USA, Stabilizer System for 5th Wheel, Travel and Camper Trailers Without Auto Leveling - 4 Foot Plates- Item B

Stabilize your Trailer in less than 60 Seconds. Made in USA System Stabilizes Parked Travel, Camper, or Fifth Wheel Trailer.
Trailer Must Have 4 Jacks, 2 front and 2 Rear for the system to be installed. Includes the two required Foot Plates plus two additional so all jack footplates will match..
Installs Permanently so there is nothing to setup or store. Approximately 2-3 hour install...
Works on both 5th Wheels and Travel Trailers with existing stabilizer jacks. If you have an Auto Leveling system Please check out our Item C..
Eliminates Need for Tripod. Between Wheel Chocks, and Slide Out Jacks.

Check Stock

waltyotur Scissor Jack Adaptor 1/2 for Use with 1/2 Inch Drive Impact Wrench or 13/16 Inch Lug Wrench Tools or Tire Iron for Impact Drills Socket Automotive Jack RV Trailer Leveling Jack

Scissor jack adaptor for use with 1/2 inch drive impact wrench or 13/16 inch lug wrench tools or tire iron.
Made of very solid chrome vanadium steel.
This adapter make it very easy to use your scissor jack, when it is used with wrenches, especially with power drill or impact wrench.
Enough to fit for most of scissor jacks, to ensure this ,you can check the ovals size on your jacks.

Check Stock

Rophor Trailer Jack Block New Version RV Camper Blocks for Travel Trailer 5th Wheels and More Up to 15,000 lbs Use for Any Tongue Jack Post Foot 5th Hydraulic Jack or Scissor Stabilizer

【All-in-One Function】: Supports nearly any tongue jack foot, wheel jacks, 9” round 5th wheels hydraulic jack foot or Scissor Stabilizer and more! ELIMINATES NEARLY ALL MOVEMENT AND SWAY in parked RV's and Trailers (Less Stress on Your Trailer)..
【Measurement】: About 6.3" tall, L:11.2", W:8.9" at base, L:9.8", W:7.5" at top (12" tall when double-stacked), recessed post-hole is 2-1/2" diameter. Top accommodates 9” round 5th wheels jack foot..
【New Upgraded】: Compared with others All-in-one Trailer Jack Block, we have upgraded the internal structure and the load-bearing capacity has been increased by 50%, extremely strong and durable. This is a very important security guarantee!.
【Heavy Duty Construction】: Rophor RV trailer jack blocks are built with a high-performance polymer for years of rugged use. Resists dirt, grime and oil. Rated at 15,000 lbs per block..
【Why Choose Us】: Rophor specializes in the production of various RV accessories. 100% of the products have been rigorously tested to ensure that each product received by our user can work perfectly. Won’t sacrifice the quality for the price, we provide 5 years of worry-free maintenance, and look forward to your letter..

Check Stock

SteadyFast Stabilizer for 5th Wheels, Travel, and Camper Trailers Without Auto Leveling - 2 Foot Plates- Item A

Best Performing Stabilizer System, ONLY 60 SECONDS to SETUP, No need to crawl under trailer, No Storage Space Needed, Made in USA,.
Only Available in Dark Grey. Permanently installed in 2-3 hours..
Works on 5th Wheels and Travel Trailers with existing stabilizer jacks. If your trailer has an auto leveling system Please order our Item C...
Eliminates Need for Tripod. Between Wheel Chocks, and Slide Out Jacks or any other parked trailer stabilizers.

Check Stock

ABN Scissor Jack Adapter - 1.5in Square Drive Drill Scissor Jack Connector to Raise Lower and Level Your Vehicle

[Swap Tires Faster]: Quickly remove flat tires with ABN Scissor Jack Drill Adapter.
With minimal force, you can raise, lower, and level your scissor....
[How to use]: Slide drill jack adapter onto the scissor jack and stick the bolt and washer through the predrilled holes of the adaptor and jack.
[Pro Safety Tips]: Store a scissor jack and drill car jack adapter in your trunk in case of emergencies.
Always ensure you are on a flat surface when....
[Use Existing Tools]: Fits “U” shaped and “O” shaped scissor jacks.
Adapter scissor jack tool is compatible with 1/2" drive/impact....
[Quality You Can Trust]: Heavy-duty chrome vanadium steel coating resists elements so you can change tires in any weather.

Check Stock

Camco 44545 Heavy-Duty Extra-Large Stabilizer Jack Pads with Handle - Prevent Trailer Jacks from Slipping Into Soft Ground - Includes (2) Jack Pads , YELLOW

Prevents Jacks from Sinking: Helps prevent jacks from sinking into soft ground.
Can be used with stabilizing jacks and scissor jacks.
Features: Rope handles for easy carrying.
Measurements: 17-inches x 15-inches x 1-inch.
Durable Construction: Constructed of a heavy-duty polymer.
Made in the USA: Product is made in the USA.

Check Stock