ReviewsSclassic
12 Pack E12 LED Edison Bulb,4W Equal 40W LED Candelabra Bulbs 2700K Warm White,Dimmable T6 T25 LED Bulbs,E12 Light Bulb,Small Filament LED Light Bulb for Chandelier,Ceiling Fan,Wall sconces,420LM
- ...ent 40w candelabra bulb, save your bills with our dimmable E12 LED bulb: CRI:80+.
- ☀[Smooth 10%-100% Dimming] No humming or buzzing. The chandelier light bulbs are compatible well with more than 95% dimmers. Recommended dimmer: DVCL-153P-WH.
- ☀[Completely Safe & Eco-friendly] No mercury, no UV & IR, no dazzling, flicker-free and no harmful elements. The T6 T25 LED bulbs dimmable could eliminate eyes exhaustion caused by the conventional light bulbs. Our 12 pack E12 edison bulb creates a comfortable and relaxing atmosphere in your space after busy time with work and effectively protects your family's eyesight..
- ☀[Sutiable Size & Widely Use] A wonderful combination of tube shaped with modern clear glass filament design. Suitable for most light fixture with E12 candelabra socket. The 4W LED candelabra bulbs are extensively applied for ceiling fan light bulbs, pendant light bulbs, ceiling light bulbs, chandelier light bulbs, candle bulbs, wall fixture, decoration lamp, outdoor fixture, etc.
Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module
- DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
- 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
- CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
- COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
- WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant
- The Mega is 100% compatible with Arduino IDE and most of the shields are designed for the Arduino mega R3,RoHS Compliant.
- The chip is Atmega + 2560-16au and 16u2, same with the official version..
- Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin.
- Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
- It contains everything needed to support the microcontroller.
- simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Maxxima Dimmer Electrical Light Switch with Blue Indicator Light, LED Compatible, 3-Way/Single Pole, 600 Watt max, Wall Plate Included
- Replacement knobs for a light dimmer or fan control.
- Fits Lutron Skylark models SCL-153P, S-600, S-600P, S-660PNL, S-603P, S-603PNL, S-603PG, S-1000, S-10P, S-10PNL, S-103P, S-103PNL, S2-L, SLV-600P, SLV-603P, SELV-300P, SELV-303P, SELVB-303P, SFSQ-F, SFSQ-F-HO, and SFS-5E.
ACEIRMC CJMCU-811 CCS811 Low Power Carbon Monoxide Air Quality Monitoring Digital Internal Gas Sensor Module Control Board I2C
- Digital sensor for measuring changes in VOCs, in particular Carbon Dioxide (CO2).
- Simply supply power, connect WAK to Ground, and connect the SDA and SCL pins to the I2C pins on your Arduino, ESP8266, Raspberry Pi, etc..
- Operating voltage of 3~5VDC. 2C address 0x5A.
- Easy to use on a breadboard with the included 8-pin header.
- CCS811 Carbon Monoxide (CO) Breakout Board for Arduino Raspberry Pi ESP8266 I2C 3~5VDC CJMCU-811 CCS801.
AITRIP 10PCS PCF8574 PCF8574T IO Expansion Board I/O Expander I2C Evaluation Develop Module
- The PCF8574 IO Expansion Board provides general-purpose remote I O expansion via the two-wire bidirectional I2C-bus (serial clock (SCL), serial data (SDA)..
- The main resources: PCF8574, I2C interface, the 8-bit parallel.
- Typical applications: for I / O resource constraints the MCU I / O expansion.
- PCF8574T expansion board applicable to a variety of platforms including AVR / ARM.
- PCF8574T PCF8574 IO expansion board support I2C bus cascade (by pin header row seat docking methods can be used simultaneously multiple I2C modules).
AEDIKO 2pcs MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor IIC/SPI 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module
- Power Supply: 3-5V (Internal Low Dropout Regulator).
- Communication: Standard IIC Communication Protocol.
- Built-In 16Bit AD Converter, 16-Bit Data Output.
- 9-Axis Motion Tracking: 3-Axis Gyroscope, 3-Axis Accelerometer, 3-Axis Magnetometer and a Digital Motion Processor (DMP).
- MPU9250 Module Includes Pull-Up Resistors On the SDA, SCL, and NCS Lines.
- Pull-Down Resistors On the FSYNC and AD0 Lines.
- MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor Using Immersion Gold PCB, Machine Welding Process to Ensure Quality.
Arduino MKR GPS Shield [ASX00017]
- A plug 'n' play shield for experimenting with monitoring fleets, high-altitude measurements, or any kind of project requiring localization of devices..
- Arduino MKR GPS Shield uses the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is meant to be used on top of boards in the Arduino MKR boards, but thanks to its Eslov connector, it is also possible to hook it up to any board..
- It comes with a dedicated library that allows two different interfaces and offers a consistent set of APIs designed for a full usage of the GPS acquired information..
- Operating voltage is 3.3V, but this shield comes also with an on-board holder for CR1216 batteries..
- The MKR GPS Shield has an additional connector meant as an extension of the I2C bus. The extra I2C port, also referred to as the Eslov self-identification port comes with: SDA, SCL, GND, +5V, and an extra digital pin, meant to send an alarm to the otherwise plain I2C devices connected to it..
Tbest 1Pair RC Car Drive Shaft, Vehicle Front Rear Drive Shaft Universal Drive Shaft CVD for 1:10 RC Car(Silver)
- ✪ PROFESSIONAL: Preferred by knowledgable model hobbists & R/C enthusiasts..
- ✪ WORKMANSHIP: CNC machined metal is exquisite, durable with high polishing performance..
- ✪ PRACTICAL PARTS: Model-based design is highly applicable, practical. an ideal upgraded part for your model car..
- ✪ COMPATIBILITY: It is compatible with HIMOTO E10XB E10XBL E10DB E10DBL E10SC E10SCL 1:10 RC car..
- ✪ GUARANTEE: If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any problem of this product, you can send emails to us at any time. We will reply you as soon..
SunFounder 2560 R3 Project Super Starter Kit with 2560 Controller Board and R3 Controller Board
- For Arduino kits and Affordable Price - This is a complete Kit with more than 200pcs components for adults, students and beginners.. Includes 2560 controller board and USB cable, 100% compatible with Arduino Mega 2560 R3 Mega328 Nano for Arduino kit..
- Detailed Instructions - This 2560 Kit with detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components..
- 25 Projects Provided - As an upgraded starter kit compatible with arduino 2560 controller board, more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience..
- Compatible with Arduino- R3 board compatible with Arduino,use ATMEGA16U2 chip, Faster transfer rates and more memory..
- Control using r3 ATmega328P chip, Includes new pin configuration (SCL, SDA, IOREF) Clearly print on the female header connector, more precise and easier to use the wire..
HiLetgo MCP4725 12 Bit I2C IIC DAC Development Board Breakout Board Internal EEPROM Store Settings for Arduino
- The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC)..
- A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller..
- On board are SCL, SDA, VCC, and another GND for your basic I2C pinout..
- If you are looking to have more than one MCP4725 on a bus, the pull-up resistors on this board can be disabled just check the Hookup Guide in the Documents section below for instructions and tips on doing this.store settings.
- Digital to analog converters are greInternal EEPROM to store settingsat for sound generation, musical instruments, and many other creative projects!.