ReviewsScope Mount Included

U.S. Rifles, Cal. .30, M1903, M1903A1, M1903A3 and M1903A4: TM 9-1270 Ordnance Maintenance

  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms with integrated level bubble. Comes with both #6 and #8 screws for compatibility with both older and newer Savage Axis models..
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Evike - Avengers Tactical 3X Magnifier Scope with QD Flip-to-Side Mount

  • Great for use with red dot optics, or as a stand-alone short range spotting scope.
  • Fits all Picatinny and Weaver 20mm accessory rails.
  • Mount flips to the side if you pull it back and move it.
Check Stock

Evike Airsoft – KJW M700 High Power Airsoft Gas Sniper Rifle – Take Down Model

  • ◙ NOT a part or component. NOT for real weapons. Optics (Scopes/Red Dots in images) NOT included unless stated clearly. Battery and Charger may not be included. Please check the bulletpoints AND description carefully (Click on Show More if available). Blaze orange tips are preinstalled. Assembly may be required. ◙.
  • Full Metal construction with high quality polymer stock.
  • Feather light trigger pull, feather light Cycling pull.
  • Instantly take down into two pieces for easy transportation.
  • Extreme high power, great accuracy and range.
  • Model: Gun Only (Scope and Bipod not included).
Check Stock

Evike Airsoft – CYMA Standard SVU Airsoft AEG Bullpup (Model: Original w/ Integrated Bipod)

  • ◙ NOT a part or component. NOT for real weapons. Optics (Scopes/Red Dots in images) NOT included unless stated clearly. Battery and Charger may not be included. Please check the bulletpoints AND description carefully (Click on Show More if available). Blaze orange muzzle tips are preinstalled. Assembly may be required. ◙.
  • Metal body w/ nylon reinforced polymer furniture.
  • Integrated SVD scope mount base. Utilizes standard SVD/AK style side mount for optic and side mounted rails.
  • Compact and unique bull-pup configuration provides full length performance in a short barrel configuration.
  • Bull-pup design enables one hand manipulation.
  • 200 round SVD magazine included. Uses main stream A&K & compatible SVD magazines.
  • Safe, semi-auto and full auto firing capability.
Check Stock

Evike Well G96 Gas Powered Full Size Airsoft Sniper Rifle with Scope (Color: Black / Add Scope)

  • ◙ NOT a part or component. NOT for real weapons. Batteries, optics, and etc NOT included unless stated clearly. Please check the bulletpoints AND description carefully (Click on Show More if available). Blaze orange muzzle tips are preinstalled. Assembly may be required. ◙.
  • Heavy duty metal barrel, cycling, and trigger assembly.
  • Gas powered system for improved performance and consistency with longer barrels.
  • Package Includes: Sniper Rifle, Magazine, Sling, Scope, and Manual.
Check Stock

Aero Precision APRA211211 Ultralight 34Mmx 40mm Mount, Extended - Anodized Ultralight 34mm x 40mm Extended Sporting Optic Mounts, Anodized Black

  • included components: Scope Mount Scope Mount Base Screws.
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
  • Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
  • 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
  • ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe p....
Check Stock

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

Low Profile Scope Rings 1 inch – Rifle Scope Rings Scope Mounting Rings 1 Inch for Picatinny and Weaver Rails(2 Pieces)

  • The double tactical low profile scope mount fit for 1 inch / 25.4mm scope tube on the picatinny/weaver rails..
  • The height from the center of the riflescope tube to the picatinny base is 0.74 inches (18.7 mm)..
  • With mountings screws on the base and four screws on each side of the two scope rings. It will hold the riflescope mount securely..
  • Precision machined from aluminum alloy with anodized black matte finish. Light weight, only 2.46oz/70g..
  • Easy to install. Note: the rings have a star nut for installation rather than a hex nut and the tool is included..
Check Stock