ReviewsScope Mount Rings

Modkin 1'' Dovetail Scope Rings, Medium Profile Scope Mounts for 11mm Dovetail Rails - 2 Pieces (One has Stop pin)

  • ✔ Double dovetail rings for 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ One of the dovetail mounts features a stop pin, for rock solid application. Adopt anti-oxidation and anti-corrosion coating treatment..
  • ✔ Medium profile, 15mm(0.6 in) from top of the rail to bottom of scope rings ( Item height: 1.6'')..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Ruger Fiber Optic Fire Sight Set for 10/22 Rifle Red and Green - 90340

  • Dedicated scope mounting platform built specifically for the Ruger 10/22.
  • Scope rings mount directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required.
  • The rings are available in 1 inch and in 30 mm diameter versions. Confirm the diamaeter of your scope tube before purchasing..
  • 1 inch in height with a see through base, allowing for simultaneous use of iron sights.
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Dual Ring Scope Mount Compatible with Ruger 10/22 | 1 Inch Diameter

  • Dedicated dual ring scope mount compatible with the Ruger 10/22 platform.
  • Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required. The mount will not install on platforms other than the Ruger 10/22..
  • 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Air Venturi 4x15 Air Rifle Scope and Lasso Mount, BB Gun Scope Attachment

  • AIR GUN SCOPE: The 4x15 Air Rifle Scope and LASSO Mount is a perfect scope attachment that helps any air gun user have better range and optics on their air rifles. Use this scope to instruct beginners, or buy it for a veteran air rifle master..
  • AIR GUN COMPATIBILITY: This high-powered Air Rifle Scope and LASSO Mount is compatible with Red Ryder, Lil Duke, and Lil Sure Shot air rifles. The scope mount attachment gives you better control and precision and more powerful shots..
  • HIGH-QUALITY MATERIALS: The 3/8-inch dovetail mount has an aluminum construction and weighs 0.37 lbs, making this a lightweight rifle scope that's easy to carry around. The included adjustable scope rings help you find the right fit on your air rifle..
  • INSTALLATION: Remove the elevation ramp from the rear sight and use a screwdriver to remove the rear stock screw. Slide the mount base forward into the top of the air gun and replace the rear stock screw. Attach the air gun scope on top of the mount..
  • AIR VENTURI: Since 2010, we've been an innovator in the airsoft guns and accessories industry. Our quality airsoft equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check Stock

Burris 420180 Xtreme 1" Tactical Aluminum Scope Ring Set (Two Rings) for Picatinny-Style Mounts, Six Hole, Low 1/4 in. Height, Matte Black

  • ... withstand any amount of recoil and multiple uses due to its strong performance.
  • FITS MOST WEAVER/PICATINNY-STYLE MOUNTS: Built with performance in mind, this set includes 2 pieces of low-profile rings that fit most Weaver and Picatinny-style mounts perfectly and hold your scope at a 1" height.
  • suitable for all 1-inch / 25.4mm scope tube.
  • VERSATILE RING SET: If you are searching for a tactical ring for your gun to mount your red-dot optics or magnifiers, opt for this 6-screw ring with a diameter of 1 inch.
  • this will hold any other 1" accessories that you might want to mount.
  • EASY TO INSTALL: Installing 1-inch scope rings is a relatively simple process that usually involves attaching the rings to the gun's receiver and tightening them with a screwdriver.
  • the rings provide a secure and stable platform for the gun, ensuring that it stays in place and does not shift during use.
  • LIGHTWEIGHT & COST-EFFECTIVE: 1" scope rings are relatively lightweight compared to larger-sized rings which are particularly beneficial for those who need to carry their gun over long di....
Check Stock

Monstrum Ruger 10/22 Rifle Scope Rings with See-Through Base | 1 Inch Diameter

  • Dedicated scope mounting platform built specifically for the Ruger 10/22.
  • Scope rings mount directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required.
  • The rings are available in 1 inch and in 30 mm diameter versions. Confirm the diamaeter of your scope tube before purchasing..
  • 1 inch in height with a see through base, allowing for simultaneous use of iron sights.
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

PRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

FENTUK 1

  • 2 Pack FENTUK Scope Ring Adaptors With Picatinny Rail- 1 Inch & 30mm ring with picatinny top rail provides a solid mounting platform for adding an additional backup sighting tactical accessories to your rifle scope. Four screws on this ring ensure that the back-up sight will hold zero shot after shot, provide dependable long-lasting durability..
  • Fit for 30mm & 25.4mm Scope Tube- Our rifle scope ring adapter with picatinny style, each ring with circular hard gasket design, the diameter of the ring from 30mm/1.18 inch to 25.4mm/I inch, effectively switch between two sizes, perfectly meeting your different needs!.
  • 4 Slots Picatinny/Weaver Top Rails- Top 4 Slots 1.77" picatinny rail design, allowing you add on standard 21mm Picatinny or Weaver accessories, such as tactical flashlight, laser scope sight, red dot sights, micro red dot, backup/second laser sights, optics and other accessories..
  • High Quality Aluminum, Solid & Durable- Precision machining of aircraft grade aluminum alloy in black matte anodizing finish. Sturdy & durable, lightweight & compact construction, offer stable safe performance in the field. Item size: 1.77"L x 1.72''W x 1.70''H, item weight:1.38Oz/1 pcs..
  • Easy To Install & Remove- Our Scope Ring Barrel Mount is easy to install or remove ....
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles |20 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the old Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the new Post 9/2021 compatible mount..
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles | 0 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on....
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long....
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock