ReviewsScrew And Bolt Assortments

Loboo Idea Speed Out Screw Extractor Drill Bits Tool Set Broken Damaged Bolt Remover Guide Set Broken Easy Out Fastener Kit (5 Pieces, HSS 4341# Silver)

  • Designed for Screw & Bolt Extracting: Each bit has dual head designs, one is used to drill a hole in the middle of the the damaged screws or bolt with the drill end, the other is used to extracting it. The special design helps you grab and remove the screws precisely and easily in 10 seconds or less..
  • H.S.S 4341 Material: Loboo Idea stripped screw extractor is made of high quality H.S.S 4341 material, has 63-65 HRC hardness which is harder than most of other similar products. Durable and solid, suitable to removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts. Best gift for any craftsman..
  • Multi Purpose: 5 different sizes of bits (#0, #1, #2, #3, #4) are included in package of stripped screw remover kit and #0 is a gift provided for extra using. All is for ensuring that the screw extractor kit can meet all of your needs. Great for removing stripped, broken head, rusted, unscrew, free-spinning and deck screws or bolts..
  • Easy to Use: 3 simple steps: 1. Drill out, 2. Flip Bit, 3. Extract. Just no other tools needed but a drill, select a smaller bit than the damage screw, you can easily remove the screw. Note: please make sure to run the drill in reverse during the process..
  • Wide Application: The screw and bolt ....
Check Stock

uxcell 1/4-Inch Flat Washer, Alloy Steel Black Oxide Finish Pack of 50

  • Fit for Screw Threaded Dia: 1/4";Size: 15.7mm x 1.5mm/0.62" x 0.06"(OD x T).
  • Alloy steel black oxide finish for corrosion resistance, for outside applications, easy to install..
  • Prevents a nut, bolt, or screw from pulling through the material.
  • Apply for electrical connections on household and commercial appliances and in threaded bolt connections..
  • Flat washers are used under the head of a bolt or nut across the area of the support to prevent pull through..
Check Stock

Screw X-Tractor Damaged Screw Extractor Kit and Stripped Screw Extractor Set. Its A HassleFree Broken Bolt Extractor and Screw Remover Set

  • APPLY TO ALL DRILLS : 4 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released.
  • POWERFUL : Striped screw extractor removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts.
  • EASY TO USE : Just two simple steps will get the job done - Use a suitable size screw remover to drill a hole with cutting size and its easy to extract the screw or bolt using extractor tool.
  • HARDNESS 63-65HRC : Higher hardness material and is more durable than most screw extractors in market, the hardness and the durability are better than others, Buy with confidence and complete peace of mind.
  • WARRANTY :Essential Tools stripped screw extractor is backed by our 3 Tier 100% Money Back Guarantee, If you are not satisfied with the product, you can return the product for a full refund without any hassle.
Check Stock

Rexka 30pcs Fender Liner Under Cover Wheelhouse Liner Screw Bolt Compatible with Toyota Lexus 90159-60477

  • Other Names: Mount Bracket Bolt, Wheelhouse Liner Screw, Air Deflector Screw, Deflector Screw, Bumper Cover Bolt, Bumper Cover Screw, Side Shield....
  • Fits: ES300h, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GS430, GS450h, GS460, HS250h, IS F, IS250, IS350, LS430, LS500, LS500h, LX470, RC F, RC300,....
  • Fits Avalon, C-HR, Camry, Corolla, Echo, Highlander, Prius, Prius AWD-e, Prius C, Prius Prime, RAV4.
  • M6.2 x 22mm 18mm Washer Diameter 10mm Hex, Black E-Coat Phillips Hex Head Screw.
Check Stock

RWYMQWT Stripped Screw Extractor Set and Damaged Screw Extractor Kit Easy Out Broken Bolt Remover Screw Remover Set Made From H.S.S 4341 High Speed Steel With Hardness 63-65hrc

  • 【 Durable】The Screw extractor is made from 4341 high quality speed with 65 HRC hardness, which the density and hardness are about 20 percent....
  • 【5 - Pieces Bolt Extractor Set】This Damaged screw extractor kit (#0/#1/#2/#3/#4)works with most drill and all the screw size or bolt (3-12mm),....
  • 【Easy To Use】It's a very simple step. Just select a drill bit smaller than the damaged screw and you can easily remove the damaged screw. Please....
  • 【 Titanium】We have added a layer of titanium to the screw extractor, which makes the stripped screw extractor removes easier to store, does not....
  • 【Useful】Suitable for hexagon socket bolts, square head screws, wood screws, hexagon head screws, mechanical screws, sheet metal screws and other....
Check Stock

Husqvarna Part Number 532182398 Handle Knob

  • ❥ Handle knob nut screw bolt for Honda and many other lawn mower machine.Suitable,Convenient and durable..
  • ❥ A plastic nut and a metal bolt,Easy to use..
  • ❥ Material:Plastic and metal,New and high quality..
  • ❥ Size:Screw 50mm(L),20mm(head dia),6mm(dia)..
  • ❥ Satisfactory customer service,if there are any questions,please contact us freely..
Check Stock

Screw X-Tractor Damaged Screw Extractor Kit and Stripped Screw Extractor Set. Its A HassleFree Broken Bolt Extractor and Screw Remover Set (4 Piece Titanium)

  • APPLY TO ALL DRILLS : 4 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released.
  • POWERFUL : Striped screw extractor removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts.
  • EASY TO USE : Just two simple steps will get the job done – Use a suitable size screw remover to drill a hole with cutting size and it’s easy to extract the screw or bolt using extractor tool.
  • HARDNESS 63-65HRC : Titanium Hard Steel material and is more durable than most screw extractors in market, the hardness and the durability are better than others, Buy with confidence and complete peace of mind.
  • WARRANTY :Essential Tools stripped screw extractor is backed by our 3 Tier 100% Money Back Guarantee, If you are not satisfied with the product, you can return the product for a full refund without any hassle.
Check Stock

YUENTOEN Stripped Screw Extractor - 5pcs HSS Easy Out Broken Bolt Extractor Kit with Extension Screw Holder, Damaged Bolt Water Pipe Remover Set Power Drill Bit Tool for Screw or Bolt 1/8 to 3/4 inch

  • 【High Quality】These 5 piece broken screw remover set is made of high-speed steel with jagged irregular cuts, which can create more extraction possibilities for broken screws or bolts for extra durability and a good lifespan..
  • 【Meet Any Requirement】5 x Broken bolt extractor with magnetic extension screw holder, screw extractor size includes #1 for 1/8"-1/4", #2 for 1/4"-5/16", #3 for 5/16"-7/16", #4 for 7/16"-9/16", #5 for 9/16"-3/4"..
  • 【Clever Design】Reverse thread bits spiral design for extra gripping power. Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the screw extractor's grip increases..
  • 【Simple to Use】First attach drill bit(Dr) to the extension bit holder, then the drill should be moving the bit counter clockwise(and please use the slow speed), finally use the screw extractor(Ex) side to remove the screw-bolt..
  • 【Wide Application】Allows the bolt remover to work with rusted, cracked, damaged or stripped screws, studs, bolts, ....
Check Stock

Anovo Sling Swivel Studs, Wood Screw Studs

  • 【2 Design Options】: Combination wood screw studs with threaded bolt/nut swivel studs, provided opportunity for wood and synthetic compatability..
  • 【3 Thread Size】: 1/2 inch, 3/4 inch, 7/8 inch, provide 3 different ways to attach the swivel studs to your rifle..
  • 【Easy to Install】:Super easy to install on your rifle! using drill to drill hole to install screw or using threaded bolt to through hole..
  • 【High-grade Material】: Made of carbon steel, stays sturdy in the stock, provide superior durability.Surface electrophoresis process, anti-corrosion, anti-rust..
  • 【What You Get】: 4 piece 1/2 inch swivel screws,4 piece 3/4 inch swivel screws and 2 piece 7/8 inch machine screw. White spacers included. Excellent set of sling studs for rifle.Good value!.
Check Stock

ACROTOL 26 Pieces Bolt Extractor Set, Spiral Screw Extractor Set and Drill Bits, Extraction Socket Set for Removing Damaged, Rusted, Rounded Bolts, Nuts and Screws

  • [Specifications] 26 PCS Screw&Bolt Extractors/Drill Bit Set includes 6 easy out style spiral flute extractors, 13 PCS bolt&nut extractors, 1 PC 1/4" hex adapter and 6 PCS drill bits..
  • [Size] Nut&Bolt Extractor Size: 1/4inch, 5/16inch (8mm), 3/8 inch, 10mm, 7/16 inch (11mm), 12mm, 1/2inch, 13mm, 9/16inch (14mm), 5/8 inch (16mm), 17mm, 11/16 inch, 3/4 inch (19mm), included 3/8"-1/4" hex adapter. Spiral Flute Extractors Size: 1#, 2#, 3#, 4#, 5#, 6#. Drill Bits Size: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8"..
  • [Material] Every screw & bolt extractor is made from high hardness chrome-molybdenum steel, the cobalt drill bit is made from HHS..
  • [Note] Cobalt drill bits should not used for stainless steel. The bolt extractor with unique plum-shaped internal thread design provides excellent torque and can be used to rotate fasteners with deep bolts..
  • [Function] Spiral flute extractors are perfect for common fasteners, the bolt extractors are for freeing partly-exposed fasteners. The kit also includes right hand cobalt drill bits for fasteners, which can be used to help drill these fasteners..
Check Stock

Elantek 6# 8# 10# 12# 1/4\ 5/16\ 3/8\ 7/16\ 1/2\ SAE 304-Stainless Steel Flat Washers Assortment Kit

  • ♛【High Quality】--High Quality Stainless Steel Flat Washers kit,Meets ANSIB18.22.1(SAE) specifications..
  • ♛【Durable Material】--Made of high quality 304-Stainless Steel, Anti-corrosion and strength. They have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using..
  • ♛【Wide Application】--Perfect for electrical connections on household and commercial appliances, automotive and marine uses in which the power source has a threaded/bolt-type connection..
  • ♛【Various Size】--The assortments contain 9-sizes:6# (70pcs), 8# (60pcs), 10# (50pcs), 12# (40pcs), 1/4 (30pcs), 5/16 (25pcs), 3/8 (20pcs), 7/16(15pcs),1/2 (10pcs). it can cater to your different needs..
  • ♛【Easy Storage & Handy】--Package Quantity: 320Pcs. All contained in a sturdy and transparent plastic box, can be use for a storage box..
Check Stock