ReviewsScrew Bolt Thread Rolling

Anovo Sling Swivel Studs, Wood Screw Studs

【2 Design Options】: Combination wood screw studs with threaded bolt/nut swivel studs, provided opportunity for wood and synthetic compatability..
【3 Thread Size】: 1/2 inch, 3/4 inch, 7/8 inch, provide 3 different ways to attach the swivel studs to your rifle..
【Easy to Install】:Super easy to install on your rifle! using drill to drill hole to install screw or using threaded bolt to through hole..
【High-grade Material】: Made of carbon steel, stays sturdy in the stock, provide superior durability.Surface electrophoresis process, anti-corrosion, anti-rust..
【What You Get】: 4 piece 1/2 inch swivel screws,4 piece 3/4 inch swivel screws and 2 piece 7/8 inch machine screw. White spacers included. Excellent set of sling studs for rifle.Good value!.

Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
Insert left-hand drill bit into drill & set drill to reverse.
Drill a hole about 1/16” deep into the screw/bolt.
Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
Use drill, wrench, or tap handle to thread the screw bolt out.
HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.

Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 3/8\-16 Internal Threads, 1/2\-13 External Threads, 0.500\ Length, Made in US (Pack of 10)

USED FOR:Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
A CERTAIN ELASTIC:Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
BETTER THAN THE NORMAL LOCKING DEVICE:The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
CAN BE USED REPEATEDLY:The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
EXCELLENT CONNECTION PERFORMANCE:Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.

Check Stock

Prime-Line 9192524 Square Nuts, #10-24, Zinc Plated Steel, (10-pack)

Screws onto a bolt, cap screw or threaded rod of the same thread size.
Typically used in combination with a washer (not included).
Thread Type: Coarse, Thread Class: UNC-2B.

Check Stock

Front Wheel Covers Hub Axle Semi Plastic ABS Pair 33mm Screw on Nut Covers 1-Pair Chrome

Attention: MUST have at least 3/4"-1" of threads sticking out of lug nuts to work for your truck..
Check wheel size, bolt pattern and thread length before ordering, Does not fit all trucks..
Fits hub piloted wheel only. Does not fit all trucks.
fits most 22 1/2" & 24 1/2" hub piloted wheels with ten 33mm screw-on lugs.
Fits most 11 1/4" bolt circle/center applications.
Will not fit applications that require PUSH-On style lug nut covers..

Check Stock

Micro Trader 0.2 Inch Thread Tremolo Arm Whammy Bar for MIM Strat Stratocaster Electric Guitar Chrome

Please check your guitar ( use an M5 bolt) this will fit an M5 thread.
A standard chrome tremolo arm screw fit with a 5MM thread..
The shaft is 5mm diameter and is threaded to be screwed into a tremolo bridge..
The thread is M5 (thread diameter 4.8mm and thread spacing 1mm)..

Check Stock

Prime-Line 9192619 Square Nuts, 1/4 in-20, Zinc Plated Steel, (25-pack)

Screws onto a bolt, cap screw or threaded rod of the same thread size.
Typically used in combination with a washer (not included).
Thread Type: Coarse, Thread Class: UNC-2B.

Check Stock

Prime-Line 9192657 Square Nuts, 3/8 in-16, Zinc Plated Steel, (25-pack)

Screws onto a bolt, cap screw or threaded rod of the same thread size.
Typically used in combination with a washer (not included).
Thread Type: Coarse, Thread Class: UNC-2B.

Check Stock

El Tornillo Y La Tuerca

√ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
√ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2", 25pcs 8-32*3/4", 25pcs 8-32*1/2", 100pcs flat washers, 100pcs nuts.
B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2", 25pcs 6-32*3/4", 25pcs 6-32*1/2", 100pcs flat washers, 100pcs nuts.
√ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
[Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
√ [Come With A High Hardness Storage Box, Easy To Use And Stor....

Check Stock

Rubber End Caps 60pcs Flexible Screw Thread Protector Caps Bolt Covers Rubber Bolt Covers Caps, Rubber Screw Caps for Metal Tube Rod Bolt in 6 Size 1/8' to 1/2'

Great Design of Rubber Caps - Our screw thread protectors can prevent wear on the kitchen or wooden floor, suitable for metal chair tips, furniture, chair legs, table legs or tips, Also it is good for covering screws or other threaded parts, screws, bolts, any round tube etc, In addition, it can provide protection against injury by pointed rod and tubing edges..
Qualitied Material - Our black round end cap covers is made of vinyl rubber material, soft and durable, and good elasticity and insulation, sturdy and thick enough to soften the impact. Also you can cut the rubber cap protective covers into appropriate length according to you own need, which is convenient for your use..
Multiple Size of Rubber End Caps - A set of rubber caps 60Pcs, these rubber cap protective covers have 6 different sizes for you to choose, including 10 pieces 2/25 inch/ 2 mm, 10 pieces 3/25 inch/ 3 mm, 10 pieces 1/4 inch / 6.5mm, 10 pieces 8/25 inch/ 8 mm, 10 pieces 3/8 inch/ 10 mm, 10 pieces 1/2 inch/ 12 mm, A sufficient amount of screw thread protectors can satisfy you to protect more bolts or use it for other purposes..
Easy Use and Widely Used - You need to choose the right size of the thread protector safety covers, we recommend choosing one that is slightly smaller than t....

Check Stock

WYNNsky Die and Tap Set in SAE and Metric Hex Threading Dies for External Threads Thread Tap for Internal Threads Thread Wrench Thread Pitch Gauge 86 Pieces Gauge Kit for DIY Tapered

Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..

Check Stock