ReviewsScrew Thread Tube

E-Z LOK 319-4 Insert 1/4-20 Int. Coarse Thd., 3/8-16 Ext. Thd., .375 Lg., Thinwall, Steel

  • Important Parameters: Size: M6(inner diameter) x 1.0(installed pitch) x 3D(installed length=3*6mm=18mm), outer diameter: 7.6mm(Min.).
  • 7.9mm(Max.), suitable drill bit diameter is 6.3mm..
  • Function: Steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • Easy to Maintenance: Install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • Excellent Performance: Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance..
  • Usage Scenario: These threaded inserts are Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread. It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
Check Stock

19 pcs Gas Can Spout Replacement Set, Gas Can Nozzle 5 Gal ，3 Bendable Tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 Threaded caps ，6 Vent Caps 1 Drill Lid

  • 19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks.
  • HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage.
  • Simple to install: 3 Bendable tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible.
  • The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down..
  • We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oi....
Check Stock

Thread Repair Tool Stainless Steel 20Pcs Rethreading Tap Set for Female Thread Repairing Insert Sleeve

  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
  • Easy to use,convenient to operate,saves effort and time in use..
Check Stock

Zinc Self-Drilling Drywall Anchors with Stainless Steel Screw Kit Heavy Duty Metal Wall Anchors and #8 x 1-1/4 Inches Screws 80 Pieces in Total

  • High strength, easier to start than other self-driving anchors. No need to prepare holes when used on drywall/hollow walls. It can hang up to 50 pounds..
  • They are easy to take out and convenient to store when in use..
  • High-quality and environmentally friendly zinc materials: Zinc materials are more durable than nylon or plastic materials. The gypsum board adopts the principle of thread anchoring to achieve firm bonding on the gypsum wallboard and bear a larger load..
  • Scope of application: only suitable for manual or electric tools to screw into gypsum board/gypsum board at low speed. It can also be used for lightweight concrete, hollow bricks, porous bricks, lime sand bricks and other soft substrates. If the substrate is thick or hard, please drill a 6mm hole in it in advance..
  • Note: When screwing the screw to the end of the tube, the screw will penetrate the tube and push to open the tip of the tail. This is normal so that it can be more closely embedded in the plasterboard..
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

iSportgo Bike Bracket Bicycle Mount Holder for Outdoor Portable Bluetooth Speakers / GoPro Hero / Cameras

  • ★ Using the standard 1/4"-20 thread screw,applicable for some Portable Speaker, Navigator, Recorder, Camera etc.
  • ★With tripod adapter together for GoPro Hero 1/2/3/3+/4,install on bicycle motorcycle and tube etc.
  • ★Clamping Diameter range:16-32mm(0.6-1.25in),kindly try to measure the Diameter of handlebar and tube before you purchase it.
  • ★Using POM plastic and Rubber material,Net weight: 55g, Bearing weight: up to 10kgs (22Ib).
  • ★★★Through rotate the ball head ,make the device in right direction, Multi-angle rotation, easy adjustment for optimal viewing.
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products....
Check Stock

100pcs Stainless Steel SS304 Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 2D Length for Helical Repair

  • Helicoil thread repair kit is easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • The steel thread inserts can effectively improve screw connection, greatly improving the reliability..
  • M8 helicoil is suitable for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • Helicoil m8x1.25 can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
  • Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage..
Check Stock

#4-40 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw

  • Price For: Each System of Measurement: Inch Screw Industry Standards: ASME B18.3 Drive Type: Hex Socket Rockwell Hardness: B70 to B95 Basic Material: Stainless Steel Head Height: 0.112" Head Dia.: 0.183" Thread Dia.: #4 Drive Size: 3/32" Fastener Finish: Plain Vented Hole Size: 0.035" Screw Style: Socket Head Cap Screw Material Grade: 18-8.
  • Thread Direction: Right Hand Temp. Range: 250 Degrees F Screw Head Type: Vented Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Dia./Thread Size: #4-40 Thread Style: Partially Threaded Thread Length: 3/4" Length: 1" Country of Origin (subject to change): Multiple.
Check Stock

M12-1.75 x 50mm Zinc-Plated 12.9 Alloy Steel Socket Head Cap Screw 50 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Metric Dia./Thread Size: M12-1.75 Screw Style: Socket Head Cap Screw Thread Dia.: M12 Fastener Thread Type: Metric Coarse Thread Direction: Right Hand Material Grade: Class 12.9 Item: Metric Socket Head Cap Screw Vented Hole Size: Not Vented Basic Material: Steel Min. Tensile Strength: 176, 900.
  • Head Height: 12mm Head Dia.: 18mm Rockwell Hardness: C39 to C44 Thread Style: Fully Threaded Screw Head Type: Cylindrical Thread Length: 50mm Screw Industry Standards: DIN 912 Drive Size: 10mm Fastener Finish: Zinc Plated Length: 50mm Country of Origin (subject to change): Multiple.
Check Stock

8 Pack M6x50 Hanger Bolts Double Headed Bolts Self-Tapping Screw 50mm Hanger Bolts for Furniture

  • Machine Screw Thread Length: 22mm / 0.87".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock