ReviewsScrew Threading Equipment

GSM Brands Portable Air Conditioner Exhaust Hose - 5.9 inch in Diameter Size - 59 inch Long - Universal Flexible Counter Clockwise - Room Air Conditioners

  • SIZED TO FIT - 5.9 inches diameter and 59 inches in length.
  • SECURE FIT - Counter clockwise screw threading keeps hose attached.
  • BUILT TO LAST - Durable, polypropylene construction prevents tears and leaks.
  • EASY TO INSTALL - Flexible design allows hose to bend to fit even the tightest spaces.
  • CHECK YOUR AC UNIT - This exhaust hose is threaded counter (anti) clockwise with a 5.9 in diameter. Confirm fit with your AC unit before ordering as some units use clockwise threading..
Check Stock

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

JCHL D-Ring Tie Downs Anchors Lashing Rings for Loads on Trailers Trucks RV Campers Vans ATV SUV Boats Motorcycles etc Vehicles Heavy Duty 2400 Pounds Capacity Tie Down Ring (10-Pack)

  • 10-Pack D Ring tie downs with high-strength steel construction for strength and longevity with 2400 pounds Capacity per ring..
  • tie down rings made of exceptionally heavy duty zinc-plated solid steel, protected by zinc-plated to prevent corrosion and rust..
  • Easy Installation: By threading a screw or bolt through the 1/4" diameter bolting hole on the mounting clip and securing to any wood or metal surface..
  • Wide Application: Anchor all logistic tie-down ratchet and cam buckle straps, ropes, hooks, and chains to secure cargo of all sizes and weights - bikes, ATVs, UTVs, quads, motorcycles, furniture, camping equipment, delivery boxes, appliances, heavy machinery and power tools, and other loads..
  • JCHL Team strive to provide you highest quality products and best service, 100% satisfaction guarantee.
Check Stock

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock

14K Solid Yellow Gold Threaded Screw on Screw off Replacement Earring Backs (Single Yellow Gold .041)

  • Fits almost every screw back post which is 0.041 " thickness. Screw back earrings vary by manufacturer and come in many diameters and threading patterns, so we cannot ensure that they will fit your earrings. If they do not work for you, simply return them for a full refund..
Check Stock

HVAZI #2-56 to 3/8\-16 UNC 304 Stainless Steel Hex Nuts Assortment Kit

  • ...e in construction, manufacturing, engineering, assembling, DIY and more..
  • Secure Hold – Our lock M6 Nuts come with an integrated locking insert that wraps around the threads once tightened. Due to the increased friction, our hex nuts are unaffected by vibrations, and will not loosen over time. Perfect for any self threading nuts assortment..
  • Rust Resistant – Our Stainless Hex Nuts are great for any hex nut assortment. They are extremely durable with a premium quality carbon steel body, and zinc plated surface. Even works well in wet environments, offering superior rust resistance, for extra piece of mind..
  • Wide Application – Our 6mm Nuts for metric nut bolts are practical for various projects. Recommended for precision machinery, electronic equipment, household appliances, communication products & more. They are also a popular choice for Vehicle, Boat & Aircraft maintenance..
  • Easy to Install – Our Hex Nut kit doesn’t require an additional locking washer, that makes the process a lot easier & less time consuming when installing. Start getting jobs done faster and save money! We truly believe our Hex nuts are the best in the marketplace and we stand by that. If our Hex nuts start driving you nuts, we’ll FULLY REFUND YOU. So, click “Add to Car....
Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller (....
Check Stock

uxcell 5/8-18 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 3/8-16 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock