ReviewsScrew in Stand

Janaden Acrylic Risers Display Stand 3 Tier Clear Acrylic Display Shelf for Amiibo Funko POP Figures Steps Display Shelves Perfume Holder Cupcake Stands for Decoration and Organizer

...mm thickness acrylic panel. The clear acrylic display stand has a nice polished finish and is thick enough that you are not worried about it warping or falling over. And crystal clear acrylic that does not distract from the items you are displaying..
【Easy to Put Together】The four legs per each piece are easy to screw on, you can just insert the screws into the holes of acrylic display and press the screw with your thumb and twist the pillars into place, very easy to assemble, don't need the screw driver..
【Great for Displaying Small Items】If you need a way to raise some of them so they could be seen. These tiered display risers fit the bill perfectly. The acrylic riser shelf is a great way to organize and display your smaller collectibles or items, it can be used as cupcake stand, perfume organizer stand, makeup organizer stand, spices rack and shot glasses display shelf..
【Good Condition Package】All Acrylic Stands for Display are wrapped in a protective bubble film to prevent the Acrylic Funko POP Display Shelf from scratching and damaging in transit. With a cleaning cloth, you can clean the acrylic organizer shelf off if you smudge it. Let our step acrylic riser dust free all the time..

Check Stock

Rockville ROGAN STAND Pro Boom Arm Mic Stand with Fixed Mount+Desk Stand+Cable

Includes: Boom arm stand. Allen key . 2" long M8 screw (for desk surface-mounting). 4" long M8 screw (for desk surface-mounting thicker desks). C-Clamp for desk clamping. Fixed mounting plate to mount it into your desk (comes pre-installed to the C-clamp, see our video for how to install). Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand. Mic clip.
Rockville ROGAN STAND Pro Boom Arm Mic Stand. Includes XLR cable built into the stand that is hidden inside the stand for a clean look. Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism..
Easily Mounts to the top of a desk (See our install video). Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3” inches thick) . This is made out of aluminum which is rust-free and lighter weight..
Arm length: 19" + 19". Position is completely adjustable. Firmly stays in place once you adjust it. There is a safety locking pin for the arm to lock in place (other similar stands do not have this)..
Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this). Standard 5/8” Mic Threads for Connecting Most Podcast and Vocal Microphones. Suitable for st....

Check Stock

M.2 Screw Kit,NVMe Screw m.2 SSD Mounting Kit，Compatible ASUS Motherboard

M.2 Standoff and Screw for motherboard NGFF/NVMe Kit，Screw specification M2*3 (mm).
compatible Asus13020 M.2 SSD Mounting Kit Standoff + Screws for Motherboard ..
M.2 Screw + Screw Hex Nut Stand Off for motherboard NGFF.
Application: Perfect for universally laptop notebook repair, applied in electronics, computers, PC board, DIY hobby etc..
Package Content:Hex head jackscrews*4、Flat head Screws*4、Transparent screw washers*4、Screwdriver*1.

Check Stock

Vangoa Snare Drum Stand Lightweight Double Braced Adjustable Height Snare Stand with Carrying Bag Fit 10' to 15' Dia Drums

✔️【STURDIER & HEAVY-DUTY】2.5 cm wide in tube diameter, thicker pipe makes it studier and durable.
Double-braced legs offer better performance in keeping a heavy drum in place. Adjusting Knob is updated, using ergonomic design, comfortable to hold, agile to operate.
✔️【MEMORY CLAMPING SCREW】Clamping screw remembers your setting of the diameter you used last time, saves your time in setting and it can tighten the clamp to fully secure your drum. The rubber gasket provides frictional hold and the screw hold can back out from vibration then the whole snare would not slide down. It will not mark your snare drum as well.
✔️【EXTRA CARRY BAG】If you are afraid of the drum being damaged by a snare stand using the storage bag of the drum, why not separate them? Extra carry bag can help you, it is a 420D oxford cloth bag, durable and waterproof.
✔️【PERFECT FOR STUDENTS&PLAYERS】The lightweight snare drum stand is perfect for students and advanced players. It is foldable and double-braced, easy to carry for courses or take out performances.

Check Stock

Universal Baby Camera Mount Flexible Baby Monitor Holder Shelf Compatible with Infant Optics Baby Monitor,Baby Monitor Camera Holder Strong Camera Shelf Bracket Compatible with Most Baby Monitors

...l not damage the crib or furniture.(It can be installed on furniture with a thickness of 0 to 4.5 cm.).
MULTIPLE INSTALLATION METHODS-You can directly use the camera clip to fix the camera (the diameter of the bottom of the camera is 6.5cm to 8.5cm) you can turn the spring screw according to the size of the camera to adjust the "tightness".Use the accessory base to match the (M5 threaded holes and shape screw 1/4 threaded holes).
The total length of the stand is 85cm, The camera bracket is made of strong, high-hardness reinforced aluminum alloy, which has better bending and longer service life.The top of the baby monitor stand is a device for holding the camera,It adopts a spring-stretched design.The screw device on the top is designed to pass through the handle.Need to rotate the screw after placing the camera and to fix the camera..
THE CAMERA STAND IS COMPATIBLE WITH MOST MONITORS ON THE MARKET-Made of aluminum alloy material,look clean, smart and sturdy. Perfectly fit for your baby monitor. Equipped with 3M sticker and 3 fixed screw and to avoid your device falling off.This baby camera mount is suitable for mo....

Check Stock

InnoGear Desktop Microphone Stand, Upgraded Adjustable Table Mic Stand with Mic Clip and 5/8\ Male to 3/8\ Female Screw for Blue Yeti Snowball Spark & Other Microphone

Upgraded with metal base and affixed with 4 non-slip cottons, moving the desktop microphone stand without causing any noise and leaving any scratches on the table..
Our base diameter is bigger and weight of stand has been increased as heavy as 840g(1.85lb) so it won’t be knocked over very easily.
the desktop microphone stand is adjustable from 10.6” to 15.4” height..
Other's snap-in style stand may loosen after a long time, while our screw-in style stand is much more secure and tight, making sure the height stays on without sliding down..
Package comes with an extra high quality metal 5/8" Male to 3/8" Female Screw for multi-purpose of use. It works perfectly with Blue Yeti, Blue Yeti Pro, Snowball and other microphone..
The desktop microphone stand is easy to carry. Suitable for holding the microphone at the conference room, church and other public places..

Check Stock

K KASONIC Microphone Stand, Adjustable Microphone Suspension Boom Scissor Arm Stand for Broadcasting Recording, Voice-Over Sound Studio, Stages, Streaming, Singing and TV Stations

Foldable Arm Band - The adjustable arm can be folded up and easy for you to carry around. This feature enables to adjust the suitable angle and height to show your perfect voice. Before adjusting the angle of the stand make sure to loosen the knob first. Avoid rotating it by force as it can damage the screw threads..
Think for You - It has a table mounting clamp and protective layers of sponge, the stand will never hurt your furniture again. An adjustable positioning screw can easily clip to any desktop with a thickness of 2" and allows your microphone stand to rotate 360°. Comes with 3 sticky strips, so you can organize your microphone wires..
Universal Compatibility - The boom arm stand is universal to fit all your needs. If your microphone comes with a different adapter clip just detach the clip and attach your microphone adapter clips to our stand to hold your personal microphone. It has a threaded screw adapter at the end of the mount. Suitable for any stores, families, stage, studios, broadcasting and TV stations, etc..

Check Stock

NEEWER Mic Stand Adapter, 8 PCS Mic Thread Adapter Set, 5/8” Female to 3/8” Male, 3/8” Female to 5/8” Male, 5/8” Female to 1/4” Male, 1/4” Female to 5/8” Male Screw Adapter for Microphone Arm Stand

...you mic holder? This set includes 4 types of adapters: 3/8” male to 5/8” female, 5/8” male to 3/8” female, 1/4” male to 5/8” female, and 5/8” male to 1/4” female adapters. Easily find one to fit your mic stand.
【Securely Connect Your Device】 Made of aluminium alloy with a matte black finish, this screw adapter kit is a simple solution to securely connect a light or microphone to your stand/boom arm. All the included screw adapters are durable, sturdy, and won't rust.
【Non-Slip Side Design】 Each screw adapter is designed with external knurling to provide your hands or fingers with a better grip on the adapter. The threading is deep and burr-free, ensuring a secure and tight fit with your device and stand.
【Slotted Base piece】 The 5/8" male to 3/8" female adapter and the 5/8" male to 1/4" female adapter feature a slot at the base of the adapter so you can easily install or remove the adapter with a flat-head screwdriver. Plus, all of the adapters are lightweight and easy to carry.
【Wide Compatibility】 The screw adapter kit is compatible with most mic stands, mic clips, camera stands, recording stands and other accessories with compatible threading. Instantly choose a compatible adapter, screw into your mic boom arm and conne....

Check Stock

KES Gold Toilet Paper Holder Stand Tissue Roll Holder with Modern Marble Base SUS304 Stainless Steel Brushed Gold Finish BPH284S1-BZ

Strong, Sturdy Base: The weighted base ensures good stability and prevents tipping. The overall weight of this stand-up holder is about 4.4 lbs (2000g)..
Rustproof: Constructed from SUS304 Stainless Steel (rust-proof), ensuring longevity and durability. Suitable for humid environments such as bathroom and kitchen. Screws are also made from SUS304 stainless steel. Note: Screw and washer are pre-installed..
Anti-Slipping: Gold toilet paper stand includes 5 self-adhesive anti-slip pads. Apply to the bottom of the marble base to prevent sliding and damaging your floor..
Freestanding Mount Type: Our roll holder is designed to be easily placed wherever you like in the bathroom, so you can keep the paper roll within reach. To install the toilet paper stand, you just need to fix the rod and the pedestal with a washer and screw. Note: Screw and washer are pre-installed. When installing, please ensure the recess in the center of the marble base is facing down, otherwise, the screw will not fit into the pedestal..

Check Stock

Giantex 6 Tier Wooden Plant Stand, 10 Pots Flower Display Rack, Vertical Shelves Plant Pot Holder, Multiple Tier Plant Succulent Bonsai Organizer Storage for Home Patio Balcony Garden

【6 Tiers Plant Stand】: Designed with multiple tiers, this wooden plant stand provides large space for you to place different kinds of potted plants (at least 10 pots)..
【100% Solid Wood Construction】: Made of 100% fir wood, this plant stand is stable and sturdy enough to support up to 110 lbs. This flower pots holder is durable for long-lasting indoor or outdoor use..
【Thoughtful Design】: Equipped with open shelves, this 6 tiers plant stand ensures great air circulation..
【Multipurpose Home Decor】: This flower stand can organize your plants neatly indoors and outdoors, which is a great decoration for the living room, sunroom, balcony, patio, yard, etc. In addition to being used as a plant stand, this rack can also serve as a bookshelf, shoe organizer, hallway or living room storage rack..
【Easy to Assemble】: Coming with necessary parts, screw bag and detailed instructions, this plant stand is easy to assemble. And each screw has its own code..

Check Stock

Yangbaga 10.2in Wooden Cake Stand Wood Cupcake Stand Detachable with Round Pedestal Holder Display Table Decorating for Cake Wedding Birthday Parties Baby Shower

NATURAL WOOD MATERIA-- Yangbaga cake stand is made of pine,Natural wood texture, high-quality safety materials,it can withstand the test of time..
SIZE&ADJUSTABLE--This decorating stand measures diameter 10.2in, 2 different heights: 2.7”-6.8” It is stable and sturdy enough for both small and large cakes..
EASY TO ASSEMBLY-- The cake stand comes with 3 simple parts - tray top, holder and bottom base. When assembling, simply screw on the base to the holder, then screw on them to the tray, and it is ready to display..
MULTIPLE SCENES--This unique style cake stand can be used in weddings, birthday parties, dessert stands, anniversaries, tea parties and more, it can display beautiful cakes, desserts and other delicious snacks, it can match with any decoration style..
EASY TO CLEAN--Wooden cake stand is recommended not to use in the dishwasher or soak in water for a long time, it can be washed with mild soap or cold water, wipe dry after washing, and dry before storing..

Check Stock