ReviewsScsi Adapter Cable

Monoprice 100708 0.8 mm/0.8 mm VHDCI 0.8mm SCSI Cable - 3 Feet - Offset

8mm to High Density D-Sub 68 pin (HPDB68) connector for connecting SCSI storage devices and other compatible peripherals.
VHDCI stands for Very High Density Cable Interconnect.
This cable features an assembly type offset connector on the 0.
8mm connector side which means that the connector has a two piece shell.
That is held together by screws and the connector is not centered on the face of the connector housing.

Monoprice brings you a wide assortment of classic SCSI (Small Computer System Interface) cables for your legacy storage devices.
SCSI was once the de facto standard for high performance systems due to it's faster transfer rates and versatility over the more standard ATA interface.
Unfortunately do to it's popularity and failure to standardize on a single connector type a wide variety of cable types exist.
We carry cables for many of the most popular configurations.
This is a Low Voltage Differential (LVD) cable with 68pin High Pitch D Subminiature HPDB68 connectors.

Monoprice brings you a wide assortment of classic SCSI (Small Computer System Interface) cables for your legacy storage devices.
SCSI was once the de facto standard for high performance systems due to it's faster transfer rates and versatility over the more standard ATA interface.
Unfortunately do to it's popularity and failure to standardize on a single connector type a wide variety of cable types exist.
We carry cables for many of the most popular configurations.
This is a Low Voltage Differential (LVD) cable with 68pin High Pitch D Subminiature HPDB68 connectors.

Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives.
Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
Leverage hardware raid performance with this SATA multi-lane cable.
Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
Supports up to 6Gbs data transfer rate per drive.
DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
Slim ribbon cables minimize airflow impact in a computer case.
Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
Woven mesh sheath covers half of the cable for easy routing.
P1 to P4 markers provide easy ID after installation.
Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce ....

【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.

The IDC 50 connector is a 50-pin 8-bit SCSI "header" connector used for internal-type ribbon cables.
It is also known as the "Alterative 2" connector.
It has parallel 25-pin rows and resembles an older ATA/IDE drive cable except that it is wider and has more pins.
The HPDB 68 connector is a 68-pin 16-bit SCSI-2 connector used for both internal and external connections (plastic for internal and metal for external).
It has parallel 34-pin rows but has the pins much closer together and is therefore narrower than the IDC 50 connector.

Internal Mini SAS data + power cable connects a SAS controller to 4 separate SAS HDD drives.
Forward fanout cable has 1x latching SFF 8087 Mini SAS host connector and 4x discrete SAS target hard drive SFF 8482 connectors.
SCSI controller to SAS cable provides internal computer connectivity between a Serial Attached SCSI controller card host and direct attached storage hard drives.
36 pin SFF-8087 Host connector and 4x SAS 29 pin SFF-8482 data and power Target drive connectors.
DIY or pro installers require a forward fan-out cable with an internal mSAS connector when expanding storage needs for Storage Area Network (SAN) or Direct Attached Storage (DAS) applications.
Sturdy molded connectors provide a secure connection.
Slim ribbon cables in a woven mesh sheath minimize airflow impact in a computer case.
Integrated SATA power supply cables make it easy to see what is connected.
Integrated SATA power supply cables make it easy t....

Internal Mini SAS SFF-8643 to (4) 29pin SFF-8482 connectors with power connecting a SAS controller (SFF-8643) to four SATA/SAS disks (SFF-8482).
Please note that Mini SAS (SFF-8643) is host, 4 SAS 29 (SFF-8482) is target, internal Mini Serial Attached SCSI x4 (SFF-8643) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
Before you buy this cable, Please make sure the Mini SAS (SFF-8643) on your motherboard or RAID controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
Mini SAS (SFF-8643) connect to the controller, 4 SAS connect to the HDD (hard disc driver).
30-Day return for any reason, 18-month warranty, Lifetime Technical support and friendly customer service.