ReviewsScsi Raid Card

Dell 3J8FW H200 Raid Controller - R Series Servers

Dell Perc H730p Raid Controller Card - 2 Gb - 12gb/s Sas, Serial Ata/300 - Pci Express 3.0 X8 - Plug-in Card - Raid Supported - 0, 1, 5, 6, 10, 50, 60 Raid Level - 8 Total Sas Port(s) - 8 Sas Port(s) Internal - Linux, Pc - 2 Gb Flash Backed Cache.

▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.

SCSI 2 devices typically use the HPDB50 connector while the wider HPDB68 connector is used for SCSI 3 connections.
You can connect your SCSI 2 and SCSI 3 devices together using this adapter from Monoprice! This adapter features a female HPDB68 connector for connecting to SCSI 3 devices and a male HPDB50 connector for connecting to SCSI 2 devices.
The male end includes side clip release latches and side clips for securing the adapter to a panel connector while the female end includes nuts for securing to a line connector.

SCSI or SUN workstation Cable with Centronics 50 Male to DB50 Male Connectors.
This SCSI RS232 cable connects SCSI to SCSI Devices or SCSI systems to SCSI Devices with a Centronics 50-pin or CN50 Male to Male..

Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCIe.
2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports / PCIe.
2-Slot PCI Express SATA M.2 RAID Card / SATA 3 Controller Host Card Adapter.
PCIe SATA Card for almost all SATA M.2 solid-state drives plus port multiplier up to 7 drives.
Storage controller supports hardware RAID / NCQ / HybridDrives / SATA3 6Gbps.
Perfect for data recovery & backup / Improves the storage & performance of a PC.

[Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
[High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
[Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
[For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
[Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.

►Mini SAS 36 (SFF-8087) male is to connect to the Motherboard or Raid controller, 4x SATA is to connect to the backplane..
►Mini SAS 36 (SFF-8087)male is host,connecting to the controller, 4 Sata connect to 4 HDD,supporting data transfer rates up to 6Gbs per drive..
►Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access..
► 3.3FT:Flexible design which would not crack easily and it is convenient to be used in the computer case..
► After-sales service:24 months warranty and 24 hours online service..

Are you looking to add additional storage but don't have the room in your server? The HP Smart Array P441 Controller is a low-profile, PCIe3 x8, 12 Gb/s Serial Attached SCSI (SAS) RAID controller that.

➤8 Ports Adapter Card --- You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card..
➤For All PCs --- PCIe to SATA 3.0 8 Port Expansion Card with a low profile Bracket and 6 SATA Cables，compatible with 99% size chassis on the market..
➤Chipset --- With using The chip 88SE9215+JMB583, improve this card more stable and compatible..
➤System Support --- Connect 8 large capacity storage devices at the same time. Compatible with Windows XP / 7 / 8 / 10 / MAC / NAS / Linux OS.NO Driver required.( Please go to the SSD's website and find and install the NVMe driver for Windows/Linux OS if no drives appear in the Device/Disk manage ).
➤You could make the system to boot from this SATA card but non RAID. But If your motherboard has RAID function, you could make a RAID with this SATA card..

Connect 6 mass storage devices simultaneously. With Windows XP / 7/8/10 / Ubuntu.
Use the 88SE9215 chip and the ASM109X chip to improve the stability and compatibility of the card.
This PCIe SATA card contains six SATA cables to simplify the connection!.
This PCIe SATA card allows you to add six 6 Gbps SATA 3.0 devices to your computer (a driver is required for two of the satellites)..
You can boot the system from this SATA controller, but without RAID. If your motherboard has a RAID function, you can use this SATA card to create a RAID.