ReviewsSds Max Adapter

BOSCH 4-Inch x 17-Inch x 22-Inch SDS Max Rotary Hammer Core Bit HC8555 , Gray

  • EFFICIENT: The Bosch SDS-max carbide-tipped rotary hammer core bit features an effective wave design to transfer energy for up to 40 percent speedier drilling versus other bit designs..
  • POWER: With an integral shank, the HC8555 offers better power transmission and is designed to allow smaller hammers to drill larger holes..
  • VERSATILE: This core bit is versatile in application with materials including concrete, brick, and block..
  • DIMENSIONS: The Bosch HC8555 SDS-max core cutter measures 4-inches in diameter. The useable length is 17-inches and the overall length is 22-inches..
  • Only for use with SDS-max rotary hammers.
  • The bit diameter is 4 inches, and the shank diameter is 0.71 inches..
Check Stock

BOSCH HC7508 6 In. 2-Piece Rotary Hammer Core Bit, 6-Inch

  • Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design.
  • Asymmetrical Carbide teeth for faster cutting, longer life.
  • 2-piece design requires SDS-max or Spline core bit adapter (CAM008 or CAS008).
Check Stock

BOSCH 11264EVS 1-5/8 SDS-Max Combination Hammer

  • Max. Hole Diameter in Concrete- 1-5/8 Inches. Max. Hole Diameter in Concrete-Core Bit- 4-1/8 Inches.
  • Unmatched Power to Weight ratio - 13-Amp, 8.1-Feet lbs Impact Energy and 14.3-Pound - Best Performing Rotary Hammer in its class.
  • Active vibration control - vibration reduction in the hammer mechanism and the grip area provides maximum user comfort for extended periods of work.
  • One-handed SDS max - one-handed tool free SDS max system makes changing bits easier than ever before while maximizing jobsite productivity.
  • Constant response circuitry - maintains speed under load and overload protection.
  • Turbo power - delivers 20-Percent more power in hammer only mode.
Check Stock

SHDIATOOL Core Drill Bit Adapter 5/8 -11 Thread Male to SDS Plus Shank

  • 1pc Adapter for 5/8-11 to SDS Plus Shank for diamond core bit.
  • 5/8-11 male thread, Total length 72MM, shank length 45MM,pitch : 2.309mm..
  • 5/8-11 UNC thread core bits can be fitted on Hammer drill or electric drill with SDS arbor.
  • We provide 100% refunding or replacement if there are any quality problems.
Check Stock

DEWINNER Rotary Hammer Drill,1-1/4 Inch with Vibration Control and Safety Clutch,13 Amp Heavy Duty Demolition Hammer for Concrete-Including 3 Drill Bits,Flat Chisels, Point Chisels, Drill Chuck

  • ... to variety of work scenarios which are easy to switch. The double function switch design can extend 100% service life compared with single function switch design..
  • 【ERGONOMIC DESIGN】 DEWINNER rotary hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life..
  • 【DRILLING CAPACITY】DEWINNER rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/2 inch drilling diameter. The best drilling diameter 16/25-22/25 inch.DEWINNER rotary hammer drill can reach 850 r/min no-load speed and 4400bpm max impact frequency..
  • 【WHAT YOU WILL GET】DEWINNER rotary hammer*1,Depth stop*1,Key-type drill chuck with SDS shank*1,Drill chuck key*1,SDS drill bits (8/10/12 X 250 mm)*3,SDS flat chisel (14 X 250 mm)*1,SDS pointed chisel (14 x 250 mm)*1, Additional handle*1,Transport case*1,Manual*1.
Check Stock

DeVoNe Dusty Diamond's All-Star Softball 72 Pins 8 Bit Game Cartridge (Gray)

  • 1pc Adapter for 5/8-11 to SDS Plus Shank for diamond core bit.
  • 5/8-11 male thread, Total length 72MM, shank length 45MM.
  • 5/8-11 UNC thread core bits can be fitted on Hammer drill or electric drill with SDS arbor.
  • We provide 100% refunding or replacement if there are any quality problems.
Check Stock

Monkey King Bar-SDS Max 120V 1500W 4200BPM Electric Rotary Hammer Drill for Concrete with UVP User Vibration Protection- Includes SDS Max Demolition Kit, Flat and Point Chisels with Case

  • [SDS MAX 3/4 INCH INTERFACE]Fits SDS-Max compatible tools,removal of plaster and light demolition work in masonry, for breaking up and loosening earth, screed and bitumen.
  • [3 Different mode]: Three-mode operation includes "Rotation Only," "Hammering with Rotation," and "Hammering Only" for multiple applications.Three different functions of drill,hammer and hammer drill function adapt to variety of work scenarios which are easy to switch.
  • [Package included]: Sds max (point/flat) chisels *2 , Auxiliary handle * 1 , Dust cap * 1 , Oil cap wrench * 1 , Grease pot * 1.
  • [360 degree adjust handle]: Vibration control enhance the control feeling.Double layer dustproof air inlet design extends service life,Rubber and 360 degree adjust handle provides a comfortable user feeling..
  • [Various Speed Control]: Features 5 levels speed settings. Max un-load rotary speed ups to 650r/min, impact frequency ups 4200bpm. User-friendly convenient speed dial control system, easy to operate..
  • NOTE:Insert the chisel until it locks,if u have any problem,just contact us in time..
Check Stock

2-1/2\ Diamond Dry Core Bit for Brick and Block with SDS Plus Pilot Bit Adapter, 9.5\ Drilling Depth, 5/8\-11 Arbor

  • CORE DRILLING - diamond core bits are designed for soft brick or building block.
  • PILOT BIT ADAPTER - includes SDS Plus pilot bit adapter to fit SDS Plus core drills.
  • USE WET OR DRY - recommended to use with dedicated core drills or core drill rigs.
Check Stock

ZELCAN 3pc 18-Inch SDS Max Chisel Set | Flat Chisel, Point Chisel, Scaling Chisel Hammer Drill Tool Set for Tile Masonry Concrete Brick Stone Work | 40Cr Steel Drill Bit Set for Max Rotary Hammers

  • 3-in-1 Chisel Set---This multifunctional tool kit by ZELCAN includes point, flat, and scaling chisels so that you're ready to pierce, chip, edge, and scale pieces large and small in everything from ceramic tile to concrete, brick, and masonry to real and artificial stone including granite.
  • SDS-MAX SHANKS---These drill bits slot perfectly into any SDS-Max hammer drill, compatible with models from Bosch, DeWalt, Makita, Milwaukee, Hilti, and more.
  • HEAVY-DUTY STEEL---This SDS Max drill bit set is made from high-quality chromium steel drop forged and heat-tempered to give you outstanding strength and long-term corrosion resistance.
  • NON-SLIP GRIPS---Our handles are crafted for comfortable control, while their powerful torsion resistance gives you years of service even under punishing use.
  • 1 YEAR WARRANTY---Order these hammer drill bits today knowing you'll enjoy a worry free shopping experience thanks to its strong warranty and ZELCAN's usual friendly 24/7 customer service..
Check Stock

6 Pcs SDS Max Chisel Set Hammer Drill Chisel Set 3/4 inch Masonry Concrete Chisel Drill Bits HOLAN 11-inch Length Rotary Hammer Chisel Bits Including 50mm Wide Chisel 25mm Flat Chisel Point Chisel

  • High Strength Material: Chisel drill bit is made of chromium vanadium steel material, can avoid breakage, and can resist wear, oxidation and corrosion.
  • Slotted Drive System: SDS (or Slotted Drive System) bits for hammer drills/rotary hammers allow the bit to slide in the chuck and enhance the....
  • Sharpened Tops: Specially sharpened top gives continuously effective breaking on various masonry objects, such as brick, concrete, stone, tiles,....
  • Special Face Treatment - The surface of SDS Max drill bit is processed rough, increasing toughness and hardness, and reducing wear to a greater extent.
  • Rotary Hammer Drill Bits: Our SDS Max chisel bit set included 2pcs point chisels, 2pcs 25mm flat chisels, 2pcs 50mm wide chisels.
Check Stock

JCB Tools - JCB 20V Cordless Brushless SDS Rotary Impact Hammer Drill Power Tool - With 5.0Ah Battery And Charger - For Concrete, Masonry, Removing Plaster, Chiseling, Electricians Drill, Core Cutting

  • PACKED FULL OF FEATURES: The JCB Tools 20V Brushless SDS Rotary Hammer Drill 5.0Ah is always up to the job on site or around the house. As with all JCB products, construction and durability are always second to none..
  • JCB-20BLRH-5X 20V BRUSHLESS SDS ROTARY HAMMER DRILL 5.0AH: JCB's Powerful 4F (4 Function) Rotary Hammer Drill is ideal for drilling into concrete, brick and masonry. Incorporating a rotary stop mode for light chiseling of tiles, render and plaster.
  • INTEGRATED FEATURES: JCB's SDS Rotary Hammer Drill features include a sliding SDS chuck, a multi position, variable side handle and an LED work light. Complimented by a 5Ah battery and charger you'll be set to take on any task.
  • TECHNICAL SPECIFICATIONS: Motor Type = Brushless, Voltage = 20V, No-Load Speed = 0-1400/min, Hammer Impact Rate = 0 - 4500 bpm, Variable Speed = Yes, Rotation = Forward & Reverse, Impact Force = 1.7J, Clutch Position = 4 Modes, Chuck Capacity = SDS plus.
  • TECHNICAL SPECIFICATIONS CONTINUED: Switch Type = Trigger, LED Light = Yes, Overload Protection = Yes, Max. Drilling Capacity Ø (Metal) = 33/64.
Check Stock