ReviewsSds max Hammer Drill Bit

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....

Check Stock

VEVOR Concrete Hole Saw Kit, 1-2/11', 1-3/5', 2-9/16', 3-5/32', 3-15/16' Drill Bit Set SDS Plus & SDS MAX Shank Wall Hole Cutter w/a 4-1/3' Connecting Rod for Concrete, Cement, Stone Wall, Masonry

... The chip removal hole can quickly remove dust, thus preventing clogging..
Premium Material: Hole saw for masonry is made of high-quality carbon steel. It is sturdy and durable. They are sharp enough to open the wall and wear-resisted. And the connecting rods with 40CR steel are rigid and not easy to break..
For most Hammer Drills: The shank of the connecting rod adopts SDS PLUS and SDS MAX design, which is compatible with four-hole and five-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
Wide Application: This masonry hole saw can drill through common walls and floors made of brick, concrete, cement, and stone. It makes installing air conditioners, water pipes, water heaters, smoke pipes, sewers, etc. easier..

Check Stock

BOSCH 4-Inch x 17-Inch x 22-Inch SDS Max Rotary Hammer Core Bit HC8555 , Gray

EFFICIENT: The Bosch SDS-max carbide-tipped rotary hammer core bit features an effective wave design to transfer energy for up to 40 percent speedier drilling versus other bit designs..
POWER: With an integral shank, the HC8555 offers better power transmission and is designed to allow smaller hammers to drill larger holes..
VERSATILE: This core bit is versatile in application with materials including concrete, brick, and block..
DIMENSIONS: The Bosch HC8555 SDS-max core cutter measures 4-inches in diameter. The useable length is 17-inches and the overall length is 22-inches..
Only for use with SDS-max rotary hammers.
The bit diameter is 4 inches, and the shank diameter is 0.71 inches..

Check Stock

DEWINNER Rotary Hammer Drill,1-1/4 Inch with Vibration Control and Safety Clutch,13 Amp Heavy Duty Demolition Hammer for Concrete-Including 3 Drill Bits,Flat Chisels, Point Chisels, Drill Chuck

【POWERFUL MOTOR】 DEWINNER rotary hammer drill with 5.5 joules impact energy is designed to complete heavy duty concrete and metal working projects with ease and precision..
【THREE FUNCTIONS】 Three different functions of drill,hammer and hammer drill function adapt to variety of work scenarios which are easy to switch. The double function switch design can extend 100% service life compared with single function switch design..
【ERGONOMIC DESIGN】 DEWINNER rotary hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life..
【DRILLING CAPACITY】DEWINNER rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/2 inch drilling diameter. The best drilling diameter 16/25-22/25 inch.DEWINNER rotary hammer drill can reach 850 r/min no-load speed and 4400bpm max impact frequency..
【WHAT YOU WILL GET】DEWINNER rotary hammer*1，Depth stop*1，Key-type drill chuck with SDS shank*1，Drill chuck key*1，SDS drill bits (8/10/12 X 250 mm)*3，SDS flat chisel (14 X 250 mm)*1，SDS pointed chisel (14 x 250 mm)*1， Additional ha....

Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....

Check Stock

Sabre Tools 4-Piece 12in SDS Plus Drill Bit Set, Carbide Tipped, Rotary Hammer Drill Bits for Brick, Stone, Concrete (1/4\ x 12\

4 Piece 12” SDS Hammer Drill Bit Set – Includes: 1/4” x 12”, 5/16” x 12”, 3/8” x 12”, 1/2” x 12”.
Our high quality SDS bits are designed to work in masonry applications.
brick, stone, concrete, block, stucco, etc..
Compatible with all SDS Plus sized rotary hammer drills.
Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
Drilling speed – Sabre’s SDS hammer drill bits feature 2-flute self-centering carbide tip ensuring fast cut speeds and accurate holes.
Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.

Check Stock

Brushless Cordless Rotary Hammer,POSENPRO 20V SDS Plus Rotary Hammer Drill,4 Modes Selector,Variable Speed,Adjustable Handle,4.0Ah Li-ion Battery and Fast Charger Included

✅【HIGH-PERFORMANCE BRUSHLESS MOTOR】: 20V MAX DC brushless motor eliminates carbon brushes,enabling the motor to run cooler and efficiently. Meanwhile, brushless motor is compact,dust-protected,lightweight,absolutely maintenance-free and durable.The high-performance motor enables the rotary hammer to deliver up to 0-1400 RPM,0-4500 BPM and 1.7J of impact energy,making it easy to drill in hard materials like concrete and more efficient for users..
✅【DURABLE LITHIUM-ION BATTERY INCLUDED】:POSENPRO PCRH20 rotary hammer contains a 4.0Ah large-capacity lithium-ion battery pack,featuring Cell Protection to protect against overloading, over-discharging and over-heating.Without the hassle of cables, it can offer unlimited freedom of movement.The high-performance battery provides huge power and maximum run time. Shared with POSENPRO/LANNERET 20V battery platform .(20V Fast Charger also included).
✅【MULTI-FUNCTIONS & SDS-PLUS CHUCK】: The hammer drill has 4 modes for 4-Mode selector—transition between drill,hammer drill, chisel,and chisel alignment settings,reducing time and increasing efficiency.It also features an innovative chisel adjustment option, which is used to manipulate the bit to the optimum angle.And the one-touch sliding chuck for S....

Check Stock

SDS Plus Hammer Drill Bit 50Pcs 1/4 in. x 6 in. Masonry Concrete Rock Drill

✔️ 【SDS DRILL BIT DIMENSION】: 1/4" (Diameter) x 6" ( Overall Length).
✔️ 【APPLICATION】: SDS Plus Drill Bit Is Ideal for Drilling In Concrete, Masonry, Stone, Bricks and Other Construction Projects.
✔️ 【SDS DRILL CARBIDE TIP】: YG8C Tungsten Carbide Tip Ensure Quick Easy Drilling with Long Cutting Life.
✔️ 【SDS PLUS HAMMER DRILL DOUBLE FLUTE】:S4 SDS Double Spiral Flutes Keeps Fast Easy Chips Removal with Fast Cut Speeds.
✔️ 【SDS PLUS SHANK】: Made of Premium Quality of Crv Steel to Ensure the Long Cutting Life..

Check Stock

ZELCAN 3pc 18-Inch SDS Max Chisel Set | Flat Chisel, Point Chisel, Scaling Chisel Hammer Drill Tool Set for Tile Masonry Concrete Brick Stone Work | 40Cr Steel Drill Bit Set for Max Rotary Hammers

3-in-1 Chisel Set---This multifunctional tool kit by ZELCAN includes point, flat, and scaling chisels so that you're ready to pierce, chip, edge, and scale pieces large and small in everything from ceramic tile to concrete, brick, and masonry to real and artificial stone including granite.
SDS-MAX SHANKS---These drill bits slot perfectly into any SDS-Max hammer drill, compatible with models from Bosch, DeWalt, Makita, Milwaukee, Hilti, and more.
HEAVY-DUTY STEEL---This SDS Max drill bit set is made from high-quality chromium steel drop forged and heat-tempered to give you outstanding strength and long-term corrosion resistance.
NON-SLIP GRIPS---Our handles are crafted for comfortable control, while their powerful torsion resistance gives you years of service even under punishing use.
1 YEAR WARRANTY---Order these hammer drill bits today knowing you'll enjoy a worry free shopping experience thanks to its strong warranty and ZELCAN's usual friendly 24/7 customer service..

Check Stock

BOSCH 5-Inch x 17-Inch x 22-Inch SDS-Max Rotary Hammer Core Bit, HC8575

EFFICIENT: The Bosch SDS-max carbide-tipped rotary hammer core bit features an effective wave design to transfer energy for up to 40 percent speedier drilling versus other bit designs.
POWER: With an integral shank, the HC8575 offers better power transmission and is designed to allow smaller hammers to drill larger holes.
VERSATILE: This core bit is versatile in application with materials including concrete, brick, and block.
DIMENSIONS: The Bosch HC8575 SDS-max core cutter measures 5-inches in diameter. The useable length is 17-inches and the overall length is 22-inches.

Check Stock

Sabre Tools 4-Piece 12 Inch SDS Plus Drill Bit Set, Carbide Tipped, Rotary Hammer Drill Bits for Brick, Stone, Concrete (5/8in x 12in, 3/4in x 12in, 7/8in x 12in, 1in x 12in)

4 Piece 12” SDS Hammer Drill Bit Set – Includes: 5/8” x 12”, 3/4” x 12”, 7/8” x 12”, 1” x 12”.
Our high quality SDS bits are designed to work in masonry applications.
brick, stone, concrete, block, stucco, etc..
Compatible with all SDS Plus sized rotary hammer drills.
Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
Drilling speed – Sabre’s SDS hammer drill bits feature 2-flute self-centering carbide tip ensuring fast cut speeds and accurate holes.
Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.

Check Stock