ReviewsSeal A Tire Bead

TireJect Automotive Compact Car 2-in-1 Tire Sealant & Bead Sealer Kit for tire Repair of leaks and punctures

【TOOL REQUIRED】Tools required adjustable wrench, open end wrench, or air wrench. Do not use impact wrench as it will damage the bead breaker..
【EXCELLENT REMOVING TOOL】- The manual tire bead breaker Compact Tool, Weighing 11.76Lbs, excellent for working on tires without removing the wheel.. Applicable: 38" and 42" 14-ply farm tractor.
【EASY TO USE】- Bead breaker tools required adjustable wrench, open end wrench, or air wrench (wrenches are not included). Place bead breaker onto the rim with teeth and breaker foot between rim and tire bead. Tighten rim clamp jaw until snug with a hand wrench..
【LIGHTWEIGHT & COMPACT】- The tire bead breaker tool is lightweight, durable, easy to use, and carry. It can be stored in your garage, workspace, or recreation vehicle easily..
【VERSATILE APPLICATION】- Suitable for all kinds of tires - ATV, Golf Cart, Bus, Truck, Agricultural, and even Back Hoe Tires..

Applicate Lawn Mower with rear tires up to 24x12 and Front tires up to 16x7.
Includes - 30 oz of TireJect Tire Sealant, Sealant Injector, Valve core removal tool, Red valve stem caps, Protected by TireJect sticker.
Pre-install in all 4 tires to prevent flats for up to 24 months - Easy to Install with included sealant injector tool.
Full Tire Protection and Permanent Seal for tread and sidewall punctures, bead leaks, slow leaks, dry rot.
Made in USA - Engineered with liquid rubber, recycled tire particles and high strength Aramid fibers.

Fix or repair a single flat tire up to 27x11.
Seal tread and sidewall punctures up to 3/8", bead leaks and slow leaks Kit includes.

THE LIP SEALER: Get it sealed right on the first try.
The lip on the barrel guides the tire blast tank to the perfect 40 degree angle for easy tire....
FOR TIRES BIG AND SMALL: This tire blaster seats tires as small as 4 inches and as large as 24-1/2 inches.
Get things rolling again for cars, trucks,....
DON'T TIRE YOURSELF OUT: This bead blaster is faster, easier, and safer than other ways to seat tires that use straps or fire.
PERFORMANCE UNDER PRESSURE: Fill this tire bead setter up to a maximum of 150 PSI with a standard shop air compressor.
PORTABLE POWER: Connect a dual chuck to the ball valve to turn this bead seating tool into a portable tire inflator.

[ Upgrading ] --- The old version is easy to break, but the front part of the paw is reinforced on this update version. Tools require adjustable wrench, open end wrench or air wrench. Do not use impact wrench cause it will damage the bead breaker.
[ Function ] --- MOSTPLUS tire bead breaker can work on tire by loosening the bead from the rim with leverage without removing the wheels. Will handle 38" and 42" 14-ply farm tractor.
[ Versatile Application ] --- Ideal for all kinds of tires - ATV, Golf Cart, Bus, Truck, Agricultural, and even Back Hoe Tires.
[ Reinforced Construction ] --- The tire bead breaker tool is strengthened with steel brackets, more durable construction. And the compact and portable design makes the tool easy to be stored in your garage, workspace, or recreational vehicle.
[ Easy to use ] --- The bead breaker tool can work with adjustable wrenches, open-end wrenches, or air wrenches. Just drive it in, snug it down and turn the jack screw. Designing with the locking collar, it will holds tire securely.

Perfectly fit for 22.5"-24.5" Hubs: Our tire changer is built for all your favorite vehicles. It's designed to mount and dismount 22.5 to 24.5 inch hubs, ideal for trucks, coaches, semi-trailer, and so on, greatly assisting you in handling tire changing or retreading tasks..
Solid Construction for a Solid Change: Our rust-proof mount demount bars are made from high-strength drop-forged 40Mn and powder-coated Q235B. And the bead keeper is constructed from wear-proof reinforced nylon, designed to better protect your tire, rim, and tool. Its made to withstand the test of time while taking a beating!.
Operate without Sweat: Just follow these simple steps and see the difference. First, lubricate the tire and insert the demounting tool into the tire. Next, press the long handle to easily remove the old tire. Then, lubricate the new tire and set it on the hub. Finally, install the new tire using the mounting tool in conjunction with the bead keeper. It's as easy as that!.
Ergonomic Designs for Comfort: Our tire tools with nylon rollers can get you out of danger and won't leave you feeling fatigued aft....

Be sure the tire bead is seated evenly all around the rim by first adding a little air to the tire, checking the bead on both sides and if beaded properly continue filling air to the correct pressure as stated on the tire. For the health of your tire and tube always maintain the proper air pressure. See the side of your tire for minimum and maximum pressures..

Hydraulic Foot Pump: The bead breaker tool kit comes with a 700bar air hydraulic foot pump, and one air hose is also included.
Heavy Duty: Max Pressure 10,000psi (700bar).
Pressure Range: 40-150psi (2.8 to 10.3Bar)Our hydraulic bead breaker delivers 10,000 lbs. of force in seconds to break beads smoothly under hydraulic action.
Lightweight & Compact: The tire bead breaker tool is lightweight, durable, easy to use, and carry. It can be stored in your garage, workspace, or recreation vehicle easily.
Versatile Application: The bead breaker and foot pump are great for all kinds of tires - ATV, Golf Cart, Bus, Truck, Agricultural, and even Back Hoe Tires.
Excellent Removing Tool: Our tire bead tool kit can perform greatly on the tires by loosening tire bead from the rim with leverage without removing the wheels.