ReviewsSeal silicon Carbide

MJR Tumblers Refill Grit Kit for 3 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 3 ounces of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 3 ounces of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 1.5 ounces of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 1.5 ounces of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

Juvielich Bench Grinding Wheel Green Silicon Carbide Grinding Wheel 1.26 Arbor 0.98 Thickness 120 Grit for Surface Grinding

  • 【DIMENSION】- Green silicon carbide grinding wheel outer diameter 150mm/5.91",center hole 32mm/1.26", thickness about 25mm/0.98",120 Grit..
  • 【HIGH QUALITY MATERIAL】- Green silicon carbide grinding wheel is made of Green silicon carbide,with high hardness and toughness,wear-resistant,durable..
  • 【FEATURES】- Green silicon carbide grinding wheel,high hardness,high brittleness,sharp abrasive grains and good thermal conductivity.It is not easy burning to the cutter head and the workpiece..
  • 【APPLICATION】- Works exceptionally well on tools like drills,mills or disposable tips for burring,grinding,stock removal,blending,rust removal, cleaning and finishing..
  • 【EXPLANATION】- Newly installed or used wheels every other day should be idling for more than one minute before use. Note:Do not stand in front of the wheel..
Check Stock

MJR Tumblers Refill Grit Kit for 15 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 16 ounces (1 pound) of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 16 ounces (1 pound) of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 8 ounces (1/2 pound) of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 8 ounces (1/2 pound) of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

Mechanical Seal, 304 Stainless Steel + Silicon Carbide Cr Shaft Size 16Mm Cartridge Seal for Grundfos Pump and Water Pump for Cr Series Pumps

  • 【Design to Reduce Wear】304 stainless steel + silicon carbide Material Pump Seals, All axial movement has been eliminated, preventing wear on the shaft and rubber parts..
  • 【Balanced Type】The cartridge seal is a balanced type seal, which makes it less insensitive to pressure..
  • 【Easy to Use】Used for balance sealing. Easy to install, easy to replace without disassembling the pump parts..
  • 【Unique Advantage】Cartridge design provides unparalleled advantages. All of this ensures extra reliability..
  • 【Applicable Model】Combines the best features of standard seals and is cleverly packaged. Suitable for CR series pumps..
Check Stock

Key Lander Hot Tub Bath Pump; LX Motor. (WBC150)

  • Bath Pump, 9A/110-120V/60Hz, UL, CUL,ETL Certified；.
  • Excellent quality copper winding Motor for cooler operation.
  • Thermal Protector from Texas Instruments.
  • Excellent quality capacitor compliant with our strict tests: Water-Proof Test, High Pressure &Hot WaterTest, 80,000 Charge and DischargeCycle Test, and 500V AC Impulse Test.
  • Viton/ Silicon Carbide/ Graphite Seal: Resistant to High/Low temperature.
  • High Hardness for Durable & Reliable performance..
  • Anti-Creep Bearing with high temperature grease oil to ensure quiet operation..
Check Stock

Tonmp 6 Pounds Rock Tumbler Refill Grit Media Kit 4 Polishing Grits | 4-Steps for Tumbling Stones

  • 4-Step grit pack with 6 pounds of total weight. Our universal grit is designed for any rock tumbler..
  • Step 1 - 2 lb. 60 Coarse Silicon Carbide Grit, Step 2 - 2 lb. 180/220 Medium Silicon Carbide Grit, Step 3 - 1 lb. 500 Fine Silicone Carbide, Step 4 -....
  • Packaged in 4 bottle to safely store unused product for later..
  • The kits Will work with all rock tumbler.Makes high quality rock tumblers and materials..
  • Purchase with confidence. We proudly back our product with a 100% satisfaction guarantee.
Check Stock

Othmro 1Pcs Internal Diameter 20mm Alloy Plastic Mechanical Shaft Seal Replacement 108-20 Shaft Seal for Pump Shaft Water Pumps Shaft Mechanical Sealing for Swimming Pools Spa Pumps

  • 45mm Inner Diameter Mechanical water pump shaft seal Single Coil Spring Carbon vs Silicon Carbide NBR.
Check Stock

Ace Hydraulic Driven Centrifugal Pump 2" Suction x 1.5" Discharge USA Made Farmer Bob's Parts FMC-200-HYD-304

  • Max flow: 200 gpm Max pressure: 120 psi Port sizes: 2" FNPT Suction, 1-1/2" FNPT Discharge Pump material: Cast Iron Hydraulic motor: Requires 11 gpm hydraulic flow on closed and open systems Seal material: Viton Carbon/Ceramic (Optional Severe Duty Silicon Carbide available) Impeller material: Chemical Resistant Valox (Optional Cast Iron).
Check Stock

Polly Plastics Rock Tumbler Tumbling Media Grit Kit & Plastic Filler Pellets

  • COMPLETE KIT - 4 Step grit pack and plastic filler for use in 15 lb. tumbler or five 3 lb. tumbles..
  • CONTAINS - 1 lb. 60/90 Coarse Silicon Carbide Grit, 1 lb. 180/220 Medium Silicon Carbide, Grit, ½ lb. 500 Fine Silicon Carbide, ½ lb. 1200 Aluminum Oxide Polish and 1 lb. of premium high-impact polypropylene plastic filler pellets. Protect and cushion fragile stones and reduce tumbling noise..
  • GRIT SOLD BY WEIGHT NEEDED FOR EACH STEP – Steps 1 & 2 are 1 lb. each and Steps 3 & 4 are ½ lb. each but all are sold in the same size jars for packaging consistency. The different weights, along with different densities, will mean that jars will not have equal amounts of fullness..
  • PREMIUM POLISHING MATERIALS, COMPATIBLE WITH ALL BRAND TUMBLERS - Proven to produce a beautiful polish. Made in the USA..
  • BEGINNER FRIENDLY - Complete, easy-to-follow instructions included. 100% satisfaction guarantee on all our products..
Check Stock

Ace Hydraulic Driven Centrifugal Pump 1.5" Suction x 1.25" Discharge Farmer Bob's Parts FMC-150-HYD-206

  • Max flow: 135 GPM Max pressure: 120 PSI Port sizes: 1-1/2" FNPT Suction, 1-1/4" FNPT Discharge Pump material: Cast Iron Hydraulic motor: Requires 7 gpm hydraulic flow on closed and open systems Seal material: Viton Carbon/Ceramic (Optional Severe Duty Silicon Carbide available) Impeller material: Chemical Resistant Valox (Optional Cast Iron).
  • 014-FMC150HYD206, FMC 150 HYD 206, FMC150HYD206.
Check Stock

Osborn - 00032131SP 32131Sp Abrasive Cup Brush, Silicon Carbide, 6000 Max RPM, 6” Diameter

  • Abrasive Disc Brush: Osborn’s ATB Uni-Lok Quick Change Brushes feature a permanently mounted ¼” shank for quick, convenient attachment to CNC machines, automatic equipment, portable tools, and robotic cells..
  • Quick Change Brush: The unique composite design allows for “touching” of surrounding raised surfaces without harming the part or the brush. Designed and tested for longevity and uniformity..
  • 120 Grit Brush: These small diameter brushes feature premium-quality nylon filament with choice of Round Crimped Silicon Carbide or Round Ceramic abrasive to serve a variety of deburring needs..
  • Applications: This silicon carbide brush is great for deburring and edge radiusing space restricted and recessed areas, larger bosses on cylinder heads, sensor ports on turbine engine cases and larger pockets in turbine engine combustion cases..
  • Disc Brush Specifications: 1-1/2" Diameter, 0.028" Fill Diameter, 120 Grit Straight Silicon Carbide, 1-3/8" Trim Length, 4500 Max RPM..
Check Stock