ReviewsSealing Fittings

10Pcs Propane Tank Gasket and 10Pcs O-Rings for All Soft Nose P.O.L. Fittings, Soft Rubber Leakage-Proof Sealing, Fit for Propane Gas Adapters, Connectors, Valves, Regulators, Accessories and More

[WHAT YOU GET] You will get 10 pieces of Propane Tank Gasket and 10 pieces of O-Rings for All Soft Nose P.O.L. Fittings..
[MONEY-SAVING PROPANE ACCESSORIES] - Propane leakage preventing washers can avoid thread sealing leakage. If the seal ring worn, aged or compressed, there would cause a dangerous gas leak. Just change to new washers, there would be no more gas leak. Save much money on buying new gears and we can have a safe cooking or grill with our old equipment..
[Propane tank Gaskets] The Propane tank Gaskets can prevent leakage on propane tank connectors, valves, Regulators, adapters, fittings. Outer Diameter 0.716inch(18.2mm), inner diameter 0.394inch(10mm), and Thickness 0.12inch(3.0mm). Ensure replacement O-rings are in same size with your stock gasket..
[SOFT NOSE O-RING] - Replacement Part for Soft Nose O-Ring on Propane P.O.L. Fittings. Suitable for propane adapters, pipe connectors, elbow sealing material, cold and hot water pressure. Approximate size OD 0.587 inch or 14.9mm, ID 0.4 Inch or 10.1 mm, Thickness 0.1 inch 2.5 mm..
[DURABLE AND STURDY] Made of high-quality Soft Rubber, all the seal rings are durable and sturdy for long time usage..

Check Stock

D.N. Industrial Grade Yellow Plumbers Teflon Tape, Gas Line Pipe Thread Tape, Twice Longer and Higher Density (1.3 g/cm3) Propane Yellow Tape Perfect for Gas Fittings (1/2\

Size and Quality: D.N. 1/2 inch yellow plumbers Teflon tape Thickness is: 0.004” (0.075mm), Temperature Resistance: -190°C to 370°C, Water pressure resistance:16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%.
High density: Yellow teflon tape density is 1.3 g/cm3 ( gram per cubic centimeter).
Material: Our plumber’s tape is made of PTFE material, which has high sealing and durability and gets CSA 20755, UL MH25811 approved.
Each roll of yellow Sealant Tape has a width of 1/2 inch which is suitable for for gas fittings. The length of this gas seal tape Model is twice longer as the same models.
plumbing tape has a sealing function to prevent the leakage, Yellow gas Sealant Tape Perfect for gas fittings.

Check Stock

CNAODUN 10 Pcs Push-to-Connect Fittings 3/8 Inch Tube OD x 1/4 Inch NPT Thread Pneumatic Male Elbow Quick Connect Air line fittings…

♥【What You Get】3/8" Od x 1/4" NPT Thread Push to Connect Fittings,10pcs in total.Body Style: Male Elbow.
♥【High Quality】These air fittings are made of high quality plastic and copper ，are widely used for automatic industry, workshop equipment, auto repair ,decoration spray paint, woodworking, dental equipment, etc..
♥【Working Parameters】Working Pressure:0～145psi.
♥【Wide Range of Applicable Tubes】These fittings can be used for a wide range of pipes, and can be used for PU / PA / PE / PVC pipes..
♥【Easy Application】Plug-in design, easy installation, clear threads, strong sealing..

Check Stock

Shurflo 2088 Elbow Fitting - Elbow 1/2\ NPT-F Swivel Nut X 1/2\ Hose Barb, Nylon, (Pack of 2), P/N 244-3926-2

【0% Metaloxide】: PEX A expansion elbow made by premium PPSU materials without metal, provide lead-free potable water, healthy for human and environment..
【PPSU Materials】: Light and durable, chemical stability. Well performance in corrosion resistant, heat and water resistance, RO (reverse osmosis), chlorinated and other types of water. Meet cUPC, NSF, F1960 standard..
【160 PSI, 200°F】: Expansion elbow fittings tightly connect with pex-a tube under high temperature/pressure. Applied to Building services pipework systems, Plumbing and heating (or cooling) systems, Potable water service line etc..
【Stopping Shoulders】: To indicate PEX A pipe fully insert in expansion fittings, leak-free. Cold connection, use with expander and expansion rings, no require for glue or sealing tape..
【Package】: 1/2" Expansion 90 Elbow Fittings 10PCS 1/2.

Check Stock

TAISHER 2PCS Black PVC 1-1/2 Bulkhead Tank Connector Adapter Fitting with Gasket for Water Tank Rain barrels Aquariums Bathtubs and Sink

Product Type: Bulkhead Water Tank Connector, suitable for installation in water tanks, water towers, buckets, fish tanks, etc..
Product material: Made of PVC, strength, durable, will not fade, fall off and crack，These fittings are not allowed be installed for potable water use.
Sealing: Threaded connection and embedded gasket form a tight seal, not easy to slip and leak..
Easy to install: Can be installed in walls, tanks or panels. The bulkhead design makes it easy for accessories to pass through the holes..
[Please note] When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Check Stock

Universal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring

Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....

Check Stock

12pcs Flat Rubber Washers Rubber O Ring Seals Water Pipe Connector Replacement for Faucets and Shower Head(1/2 inch)

[Material] These washers are made of high quality rubber material, they are durable and has longer service life..
[Good Sealing] The rubber rings can work greatly as sealing washer and plug washer set, they have good sealing performance, high reliability and great durability..
[12Pcs] There are total 12pcs rubber washers, they are good replacement for your old or broken one..
[Application] They are specially designed for fastener, plugs, water and hydraulic fittings. They have great solid quality for DIY lovers to make, fix and modify things..

Check Stock

Premium Industrial PVC Pipe Schedule 80 Grey 1 Inch (1.0) Grey/PVC / 5 FT

...n hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. Create sturdy shelving, workbenches, tables and desks with this larger scale pipe. Custom furniture that you design will impress your guests..
Choose from our large selection of malleable cast iron fittings, nipples and connectors to create one of a kind, custom furnishings limited only by your imagination. Build DIY steampunk lamps, rustic shelves, a wood and steel bar, or industrial farmhouse and retro themed furniture. Mix black steel pipe with galvanized fittings to create truly unique looking pieces for your home, office, or business..
Beauty and beast. Strength and style. You will know Pipe Décor parts and accessories when you hold them. This is real industrial pipe for custom furniture and lamps, or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 362 112x18-4..
Because these are authentic parts, cleaning and sealing is required prior to use to prevent rust. Each pipe comes coated in a light industrial grease to prevent rust. For your convenience....

Check Stock

TAILONZ PNEUMATIC 25mm Bore 50mm Stroke Pneumatic Small Thin Cylinder Aluminum Pneumatic Air Cylinder SDA25-50

【Model】Pneumatic Small Thin Cylinder.
【Working Pressure:】0-1.0mpa | 0-145psi..
【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..

Check Stock

TAILONZ PNEUMATIC 32mm Bore 25mm Stroke Pneumatic Small Thin Cylinder Aluminum Pneumatic Air Cylinder SDA32-25

【Model】Pneumatic Small Thin Cylinder.
【Working Pressure:】0-1.0mpa | 0-145psi..
【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..

Check Stock

40Pcs Plastic Quick Fitting 1/4 Inch Pneumatic Push Connector Pipe Tube Fitting Straight, Elbow Union, Y Union, Tee Union Connectors PU6,PV6,PE6,PY6 Parts for Air Hose

[Good performance] Pipe body can rotate 360 degree even if installed, which is simple and flexible. High precision threads ensure its good sealing performance. It doesn't fall off under high pressure, safe and reliable..
[Four models] Package includes four models of tube fittings: Straight Connector, Elbow Union Connector, Y Union Connector, Tee Union Connector. All models of push lock fittings are designed to suit your pneumatic piping needs..
[Convenient] Release ring with oval design is more convenient to disassemble. Easy to install, no extra sealing requiring..
[Application] Pneumatic quick connector is mainly used for quick connection of air piping, pneumatic tools, which can achieve pipe connecting or disconnecting without a tool requiring..
[Features] This Pneumatic Push Connector can withstand the temperature of 0 to 60/32 to 140, the normal pressure range is from 0 to 0.9MPa..

Check Stock