ReviewsSeamless Carbon alloy Tube

uxcell Carbon Fiber Round Tube 4mm x 2mm x 420mm Carbon Fiber Wing Pultrusion Tubing for RC Airplane Quadcopter 8Pcs

Size and Shape: Rounded tube with 8mm/0.3'' outside diameter, 6mm/0.23'' inner diameter, 330mm/13'' overall length..
Lightweight strong black carbon tube with good flat and smooth finish, corrosion-resistant, and heat-resisting..
Smooth Surface: made of high tensile carbon fiber, matte surface..
Application: Carbon fiber tube widely used in racing drones arm, RC helicopter wing structural support, RC airplanes,RC boat, kite spars, 3D printer bracket clamp rack tube, landing leg tube, linear bearings tubes, extended tube, quadcopter support tube, etc..
Note: due to manual measurement, most carbon fiber tube sizes will have a little error..

Check Stock

GUB 31.8MM Double Clamp Carbon Fiber Super Long Bike Bicycle Handlebar Extender Extension Light Lamp Computer Phone Mount Bracket Stand Holder

Constructed of durable aluminium alloy bracket and super lightweight carbon fiber bar.
Suitable for 31.8mm caliber handlebar(used giveaway spacers can fit for 25.4/22.2mm diameter handlebar).
Super longer/extended tube can assemble more items such as light/bicycle computer/phone/bell holder etc.

Check Stock

Victory 20lb CO2 Tank Aluminum Cylinder with CGA320 Valve

Aluminum carbon dioxide cylinder with cga 320 valve installed.
Cylinder with valve, without siphon tube.

Check Stock

RUNCL Baitcasting Fishing Reel REMIEL, Baitcaster - Seamless Magnetic Brake System, 7.5:1 Gear Ratio, 10+1 Stainless Steel Ball Bearings, Sealed Drag, Lengthen Handle (Red, Right)

...p anti-reverse bearing, can deliver incredibly smooth and offer exceptional corrosion protection in saltwater surroundings.
Forged Aluminum Alloy Spool: Equipped with lightweight aluminum alloy spool, allows you to spread the fishing line properly all over the spool, suitable for heavier lures and also lighter lures.
Seamless Magnetic Brake System: Constructed with 5 magnet beans for complete cast control, the RUNCL REMIEL baitcasting reel can work stable and smooth. Micro-adjustable magnetic system allows you to fine tune cast control to accommodate a variety of lures and fishing conditions, effectively reduce bird nests when casting into the wind.
Advanced Sealed Drag System: Loaded with 4 premium carbon fiber washers and 1 stainless steel arch-shaped washer. The arch-shaped washer increases contact area between carbon fiber washers and anti-reverse bearing, extends lifespan of carbon fiber washers, helps boost maximum drag by 20% (up to 17.6 lbs) and guarantees you a larger catch.
Enhanced Ergonomic Lengthen Handle: The enhanced lengthen handle (4in/10cm in length) helps save effort, promises unparalleled efficiency even when fighting with trophies, perfect for tournament anglers on a budget. The hollow out handle and non-slip high density EVA knob pr....

Check Stock

69.7" Carbon Fiber Camera Tripod with Low Profile Ball Head ARTCISE Professional Lightweight Compact Tripod with Two 1/4 inch Quick Shoe Plate for DSLR Camera,Video Camcorder, Max Load 39lbs/18kg

【High quality】This carbon fiber tripod uses 10 layers of 100% carbon fiber,main parts all metal made and via CNC Anodic Oxidation technology, 29mm large diameter tube,the load capacity can reach 39lbs (18kg). A stability hook can hang additional weight and the non-slip rubber feet design to increase the stability..
【Low profile ball head】This low profile ball head adopts superior aluminum-alloy construction, CNC precision finishing, anodized surface, it is very strong and durable.Compared with traditional ball head, low-profile ball head design create stronger locking force and higher stability..
【Extend easily】Tripod tube with quick release twist locks allow you to adjust the tripod height for 24" up to 69.7" in seconds. 3-position leg angle adjustment system helps you take photos flexible for different scenarios and photography conditions. It is more convenient with the locked method of pull buckle..
【2 in 1 Tripod Monopod】This tripod can be quickly disassembled with the central axis screw and transformed into a monopod (21.7” to 73.2”). It can be turned into a monopod or walking stick alone....

Check Stock

ROCKBROS Bike Phone Bag Bike Pouch Top Tube Bag Bicycle Front Frame Bag Waterproof Bike Accessories Bag Phone Holder Compatible with iPhone Xs Max 11 Pro Plus Samsung S10

... the top tube bag can fit almost all mountain bikes, dirt bikes, road bikes..
HUMANIZATION DESIGN: This 6.5 inches bike phone bag also design the opening ports on the bottom, you can listen to the music and answer the phone when riding. Also the bag is 3.2 inches wide, would never rub your legs..
LARGE CAPACITY & SEAMLESS ZIPPER: 1.5L lagre storage capacity, you could put CO2 inflator, bike gloves, cycling glasses, car keys, repair tools, etc. The seamless zipper can protect the things from rain or water entering, even in heavy rain day, you would not worry your things get wet..

Check Stock

SAVADECK Carbon Fiber Road Bike, Carbon Fiber Frame 700C Racing Bicycle with Shimano Sora 18 Speed Groupset Ultra-Light Bicycle for Men or Women (Black Grey, 56cm)

TORAY T800 Carbon Fiber Frame, Fork and Seat post - It’s a lightweight and stiff carbon road bike at 9.8kg (21.6lb), also designed to offer a bit more compliance..
SHIMANO Speed Control - SHIMANO SORA 2*9 Speeds with Shifter lever, Front derailleur, Rear derailleur - It enables you to start and operate your ride effectively, smooth shifting and durable..
Designed in the Wind Tunnel, the stays, seat post, and seat tube are aerodynamically contoured.
fully internal cable routing ensures clean airflow over the entire bike.
The tapered head tube strengthens the torsion rigidity and give riders a better handling..
Oval concepts 6061 Alloy 40MM Bearing Wheelset and Continental Ultra Sport II (C304 SL) Wire 700x25C Tire. Free Pedals Included..
Mostly assembled complete road bike, which is ideal for cycling beginners and enthusiasts..

Check Stock

ROADNADO Carbon Seatpost 27.2 / 30.8 / 31.6 * 350mm Bike Seat Post MTB Carbon Fiber Bicycle Seat Post Adjustable Bicycle Seat Tube for MTB Road Bike

【Carbon Fiber Material】：As a new material with excellent performance, carbon fiber has a density less than 1/4 of that of steel, but its strength is 5-7 times that of steel. It has the characteristics of light weight, good impact absorption and good rigidity.The Bike Seatpost is made of T800 full carbon fiber , light and strong, good shock absorption, more stable and safe riding. Surface 3K matte design, fashionable and durable..
【Bow Saddle Applicable】： Clip-on seat part is made of high-strength aluminum alloy, one-piece molding, safe and durable.
upper and lower clip-on structure,supporting most bow saddles on the market..
【Adjustable Saddle Angle】：Saddle can be flexibly changed by adjusting the screws on the front and rear side of the clip seat, according to your own requirements, adjust to a comfortable sitting position..
【Comfortable Riding】： Ergonomic design to give your ride a comfortable experience，suitable for most road bikes, mountain bikes, fixed gear bikes, track bikes, BMX，downhill bikes and so on..
【Choose The Right Size】：When purchasing, please be sure to pay attention to confirm the outer diameter size of the seat tube used in your frame to avoid buying back a seat tube that can not be used.Please refer t....

Check Stock

Carbon Fiber Heavy Duty Tripod ARTCISE 81'' Professional Tripod for Camera, 10-Layer Carbon Fibre Tube, 32.5mm Leg with Low Profile Tripod Ball Head for Canon Nikon Sony, DSLR SLR Digital Camcorder

【High Quality】The main body of the carbon fiber tripod is made of expensive high-quality carbon fiber material. The leg tube is composed of 10 layers of carbon fiber, which has a very strong load-bearing capacity. At the same time, the carbon fiber material reduced the tripod weight, CS80C net weight is only 2.1kg..
【External Center Column】2-1 camera tripod monopod design, external center column can increase the height of the heavy duty tripod, the difference is that it is external, you can install it on a tripod when you need it, this can reduce the volume of the tripod, one leg tube on the tripod can be removed to form a monopod with the center column..
【Compact Design】The lightweight design of the external center column allows the heavy duty carbon fiber tripod to have a compact structure. This professional tripod can folded to 23 inch, lightweight and highly portable, this tripod will fit into a 26inch,wide suitcase. Ideal for travel and work..
【Double Panoramic Ball Head]】Equipped with high-quality ARTCISE UB40 ball head, made of high-quality aluminum alloy material, CNC machining, panoramic design is easier to take panoramic pictures, 40mm ball diameter, low center of gravity design, solid and stable..

Check Stock

J2 Engineering Silver LN-T7-011-15-SL

Compatible With Lexus LS400 (UCF10) 1990 1991 1992 1993 1994.
Spring Rate (Front/Rear) : 12 kg/mm/8 kg/mm.
52mm Mono-Tube Steel Alloy Shock With 32 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track.
Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke.
Powder Coated CNC Machined Aluminum And Carbon Steel Accessories.
Full 1 Year Limited Warranty From Date Of Purchase.
Install By Experienced Professional Is Highly Recommended.

Check Stock

WORKPRO 2-Pack Pipe Clamps, Aluminum Die-casting Lightweight Tube Clamps for I.D 3/4'' Black Pipe, Firm & Stable Clamping with H-shaped Feet for Woodworking & Metalworking

【Lightweight Construction】The pipe clamps feature lightweight construction by the application of high strength aluminium alloy, 50% lighter than conventional clamps made of die casting iron.
【Firm & Stable Clamping】 With a high-pressure spring and four carbon steel sheets, the clamp makes firm & stable clamping and can hold pipes tightly to fix them in place as you need.
【Ergonomic Handle】The handle features ergonomic design providing smooth rotary, comfortable hand feeling, easier clamping and thus reduce hand fatique.
【Long-lasting Life】The thickened thread screw rod made of carbon steel is wear-resistant and the TPU protective cover can lessen damage to the clamps, thus provides longer service life.
【Practical Application】The tube clamp's outer diameter is 1.05 in, which is suitable for inner diameter 3/4 in balck pipes and work as an ideal helper in woodworking and metalworking projects. Just slide the pipe clamp through any length 3/4 in. pipe to hold wood in place for gluing and drilling.
NOTE: 2 rings are used on both ends of the tube to prevent clamps from slipping off..

Check Stock