ReviewsSeamless Pipes welded Pipes

Tee Equal Diameter 316 Good Sealing Compression Ferrule Connector Tee for Solar Energy for Chemical Industry for Complicated Pipeline(Ф8)

【Advantage】 Relatively common national standard connector double ferrule straight‑through connector, acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
【Application】 Suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
【Structure】 Compression ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
【Good Sealing Perfomance】 When the ferrule and the nut are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
【Reusable】 Ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble. Break the traditional installation method..

Check Stock

The Horseman's Axe

【】This is a two component heavy duty high temperature resistant epoxy glue with mayonnaise consistency. Capacity is 1.76oz, allowed thin application. Mixed ratio (1:1).
non-toxic and non-irritating odor. Can be used for boats, cars, fuel tanks, water pipes, heaters, vases, fence welding car bumpers and motorcycle crack repair. It is also very good cold welding glue..
【】5 minutes to set, 24 hours to fully curing, can be different materials welded together at the same time, such as metal aluminum, copper, iron, stainless steel, wood, plastic, glass, cured strength up to 4680PSI, can be stable between -65 ℃ ~ 287 ℃, cured gray, can be drilled, sanded, spray paint coloring, so that your items repaired to the original appearance..
【】Excellent impact resistance and strength helps to recover your car or boat cracks and holes. It is also suitable for repairing/fastening radiators, water pipes, tanks, pools, oil drums, cracks in bumpers or motorcycle fairings, broken headlight brackets, torn RV paneling fences, vases, swings, etc..
【】With its wide range of applications, excellent properties and almost ultimate cost performance, this epoxy glue can meet your needs in most usage scenarios at a very low cost and with guarant....

Check Stock

Super Sealer Deluxe 24\ Bar System Shrink Wrap Machine with Heat Gun (1 Heat Gun) - WRAPS-SS24D

[Fine Workmanship Heat Gun Attachments]:These heat gun attachment are well made and well designed. Using these nozzle accessories together with a hot air gun to help make industrial manufacturing more convenient and faster.
[Easy to Use Heat Gun Nozzle]: These heat gun nozzle tips are easy to install and efficient to use, ideal choice for you to replace the old or broken ones.
[Widely Application Hot Air Gun Kit]: Heat gun toolswill satisfy all kinds of professional needs, such as stripping paint, soldering pipes, shrinking PVC, removing rusted bolts, softening caulk around the sink or bending and molding plastics, for welding, bending plastic pipes and applying heat shrinkable pipes.
[4Pcs Kits Meet Your Different Needs]: This heat gun nozzle kit includes 4pcs different sizes heat gun nozzle in different shapes for your different used.
[Durable Heat Gun Accessories]: The hot air gun accessories is made of stainless steel material, which provides durability and offers good corrosion resistance.
Heat gun Nozzles has a ergonomic design handle.

Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф10)

Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..

Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф8)

Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..

Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф6)

Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..

Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф3)

Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..

Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф12)

Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..

Check Stock

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 3.0 Inch

Size: joins 3.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..

Check Stock

EVIL ENERGY 2.0 Inch Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel

Size: joins 2.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..

Check Stock

Propane Torch with 4.8ft Hose and Self Ignition Trigger, Mapp Gas Torch,Welding Torch for Brazing,Barbecue,Heating,Handheld Blow Torch For MAPP Cylinder

【Widely Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can reach 3600℉, suitable for welding 3/4" copper pipes..
【Easy to Operate】 Install the end of the welding torch on the Qcc1/Type1 propane tank, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
【Excellent and Professional Design】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
【Specifications and Note】 Please use gas type: MAPP, MAP-PRO propane.
Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
【Service and Quality Assurance】This propane torch hose is made of high-quality brass material, durable, long-distance and high-elastic hose, not easy to wear, we will provid....

Check Stock