ReviewsSeamless Square Pipe

General Tools Hose and Tubing Cutter #115 - Cuts up to 2 Inch Flexible Rubber, PVC, ABS and Polyethylene Tubing

CUTS RUBBER TUBING: Cuts up to 2-inch rubber hose or tube..
CUT PE OR ABS PIPE: Cuts up to 1-1/2 inch PE and ABS pipe..
CUTS PVC PIPE: Cuts up to 1-1/4 inch PVC pipe..
HOLDS TIGHT: The curved holder supports the hose or tubing during square cuts..
LONG HANDLES: Long handles for added leverage..

Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

...hreads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available..
Product Packaging Upgrade: The set comes with a convenient red storage box to keep the taps organized and easily accessible. The box also helps protect the taps from damage during transportation and storage. These thread forming taps are perfect for plumbers, mechanics, or anyone who wor....

Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.

Check Stock

#5 (4\ - 8\) DEKTITE RED Square Base High Temp Silicone - Flexible Pipe Flashing Boot - Dektite Pipe Flashing (DFE205RE)

Flashing Base is 12-1/4" by 12-1/4" - Pipe Boot Fits 4" x 8" Outside Pipe Diameter.
Continuous Service High Temperature Ranges of -58F to 392F (Silicone).
If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack.
Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents.
On a Roof with a 10/12 to 12/12 Pitch Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top.

Check Stock

Chiphell Ribbed Workout Sets for Women 2 Piece Square Neck Crop Top and High Waist Biker Shorts Seamless Activewear Tracksuit

【Square Neck Design】Sleeveless crop top designed with square neck-better set off the beautiful collarbone and neck curve, visually elongate the neck ratio.
Wide shoulder straps can hide the side breast to optimize the visual aesthetics..
【Removable Supportive Pad】Chiphell workout set outfits has removable pad for crop top which can prevent exercise-induced bulge and provide medium to high support for high-intense sports..
【Camel Toe Prevention】High waist compression biker shorts with special design of parallel gusset crotch prevent you from the awkwardness of camel toe..
【Ribbed New Fashion】Chiphell replaced traditional plate fabric with a new thread fabric, making the active wear clothing more fashionable, no matter whether you are yoga, exercising, gym, walking, jogging, running, cycling, tennis, and any type of workout,you are fashion and different..
【Seamless Technology】Chiphell seamless square neck sets use seamless weaving technology and high stretchy superior fabric,more elastic,squat proof,non-see-through and fits the body better..

Check Stock

HORUSDY 5-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
Right-hand cutting tool has a clockwise cutting function..
NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14. Equipped with special storage box..
Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..

Check Stock

PVC Pipe Cutter, Cuts up to 2-1/2\

【Wide cutting range】： Pvc pipe cutter tool with the ratchet drive The tube cutter is commonly used for cutting most kinds of plastic (PVC, CPVC, PPR, PEX, PE, Rubber hose, etc.), The maximum opening is 63mm, After many tests, the cutting capacity up to 2-1/2-inch (63mm) outside diameter--Can not make a square cut..
【Wide range of applications】：The JHWLKJ Pvc pipe cutter Widely used in life, This is quite convenient for your work and life. I think it is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mechanics..
【Durability】：Made with SK5 Teflon Blade, good toughness, strength. Durable aluminum alloy handles are made to last for long time use.The triangle design at the edge of the knife allows better access to the pipe.Straight Cuts - Blade does not bend or break.You can use it to cut the pipe more smoothly..
【Comfortable operation】：The professional tube cutter adopts ratchet drive technology to greatly save your strength to smoothly complete the cutting operation with one hand, which makes cutting more labor-saving and improves work efficiency. It also ensures automatic locking during the cutting process to protect the user from the rebound of the blade..
【Easy to operate】：The pipe cutter i....

Check Stock

MILTON 158 Blo-Gun 2' Ext. w/Safety & Rubber Tip

Maximum working pressure of 150 pounds per square inch.
Safety nozzle offers 10.5 standard cubic feet per minute at 100 pounds per square inch.
Rubber tip offers 11.6 standard cubic feet per minute at 100 pounds per square inch.

Check Stock

Milton 159 1/4' NPT Lever Style Blow Gun and 4' Extension

Maximum working pressure of 150 pounds per square inch.
Safety nozzle offers 10.5 standard cubic feet per minute at 100 pounds per square inch.
Rubber tip offers 11.6 standard cubic feet per minute at 100 pounds per square inch.

Check Stock

Steel Dragon Tools® 300 Pipe Threading Machine Includes 811A Die Head 418 Oiler 1206 Stand compatible with RIDGID® 15682

Dual-powered tool operates using a 1/2-inch square drive impact driver or ratchet.
Cuts up to 8-inch soil pipe when used with an impact driver (minimum 200-ft-lbs) or 4-inch pipe manually with the included ratchet.
Compact, lightweight design allows tool to fit into tight places in overhead and below grade applications and easily mount in difficult places.
Easy to set up, the articulating outward facing chain hooks lay on the pipe to simplify latching.
Features two directional operation that allows scoring of the pipe for a clean cut.

Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
Nominal size of the tap is that of the pipe fitting being tapped..
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..

Check Stock