ReviewsSeamless Stainless Steel Tubing

Eastwood 1/4 in Handheld Tubing Straighteners Coiled to Straight Tubing Tool for Brake & Fuel Line Tube Flaring

Works On Steel, Stainless, Copper, And Aluminum.
Great For Brake Lines, Fuel Lines And More.
This Handheld Tool Allows You To Straighten Steel, Stainless Steel, Aluminum Or Copper Tubing For Brake Systems, Fuel Systems And More.
Much Quicker And Less Expensive Than Bench Mounted Tubing Straighteners And You Get Way Better Results Than Trying To Straighten The Tubing By Hand.

Check Stock

Origin Catapult Universal Wakeboard Boat Tower (Black)

Extra Large Universal Wakeboard Tower - Fits Boats 17' - 24', Front to Rear Feet Distance 64"".
Adjustable Width - Fits Widths 78" - 108" Center on Center, Patented Single Bolt Feet Requires only 1 Drilled Hole Per Foot, Adjustable Feet Can Fit Top Deck, Angle Deck, or Side Deck Mounts..
Easily folds down below windshield for boat storage by removing 1 screw in each front leg..
Quality Craftmanship and Materials. Seamless 2.25" aircraft grade 6063 aluminum tubing. Solid CNC machined 6061 feet and joints throughout the tower. All hardware is stainless steel..
Integrated Bimini Top (Optional) - Tower Mounted Bimini Tops that are up and out of the way, Folding Over Tower Bimini or Flat Cargo Bimini.

Check Stock

304 Stainless Steel Compression Tube Fitting Double Ferrule Joint Connector Equal Straight Adapter(Φ1/2-Φ1/2)

STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..

Check Stock

Krypt Towers Origin Catapult Universal Wakeboard Boat Tower (Polished)

Extra Large Universal Wakeboard Tower - Fits Boats 17' - 24', Front to Rear Feet Distance 64"".
Adjustable Width - Fits Widths 78" - 108" Center on Center, Patented Single Bolt Feet Requires only 1 Drilled Hole Per Foot, Adjustable Feet Can Fit Top Deck, Angle Deck, or Side Deck Mounts..
Easily folds down below windshield for boat storage by removing 1 screw in each front leg..
Quality Craftmanship and Materials. Seamless 2.25" aircraft grade 6063 aluminum tubing. Solid CNC machined 6061 feet and joints throughout the tower. All hardware is stainless steel..
Integrated Bimini Top (Optional) - Tower Mounted Bimini Tops that are up and out of the way, Folding Over Tower Bimini or Flat Cargo Bimini.

Check Stock

mistcooling System - Stainless Steel Tubing - 1500 PSI Misting Pump - Do It Yourself Misting System - for Residential, Commercial and Industrial - Up to 120 Nozzles (18 Ft Mist Line - 10 Nozzles)

1500 PSI Misting Pump with Stainless Steel Tubing, Stainless Steel Nozzles. Do it Yourself Misting System, easy to Install , comes with all parts. For Residential. Commercial and Industrial Misting Applications.
Base 10 Nozzle Mist Kit Includes: 1 - 1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5 micron filtration, Outdoor Rust Proof Enclosure with on/off Switch 18ft Stainless Steel tubing for push lock (Pre-cut 2ft sections), 22ft UV coated Flexible 1/4" feed line, 10- Nickel Plated Push Lock Misting Tees, 10- Stainless Steel Orifice Misting Nozzles (0.006"), 2- Nozzle plugs, 1 - Push Lock End Plug.
1500 PSI Pump Features :Inbuilt Filtration, Direct Drive, With Solenoid, Pressure Switch, No Water Cut off Switch, With By-Pass Valve, 50-60 DB, TEFC Motor , 110 V AC.
Easy to Customize, Easy to Install, Do it Yourself Misting, With Push Lok Fittings for Ease of Re-Use.
2 Ft Stainless Steel Tubing Pieces with Grooves makes it easy to use the System for Industrial Applications..

Check Stock

z-dup Repair Kit

37˚ DOUBLE FLARING ADAPTERS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
37˚ DOUBLE FLARE DIE SETS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
37˚ CONE constructed of high quality machined steel.
CREATE PERFECT PRODUCTION QUALITY FLARES on annealed stainless steel tubing, terne plate steel tubing, soft aluminum and soft copper tubing.
PRIMARY USES INCLUDE racing, restoration, hot rods, aviation.

Check Stock

Parker A-Lok 8NU8-316 316 Stainless Steel Compression Tube Fitting, Nut, 1/2\ Tube OD

Nut tightens and provides compression on the ferrule of a flareless fitting.
Chemically hardened type 316 stainless steel for higher strength and greater corrosion resistance than untreated stainless steel.
For use with a twin ferrule compression fitting set for a leak-resistant seal in high-pressure applications.

Check Stock

Tubing Bead Roller Tube Pipe Tubing Beader Tool Intake and Intercooler Piping Fits 5/8″

Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
Works best when secured in a vice.Please Note: Always apply the bead before welding..

Check Stock

Amarine Made 4 Steps Premium Stainless Folding Rear Entry Pontoon Boat Ladder w/Extra Wide Step

Heavy duty welded 316 stainless steel pontoon ladder. Unique universal self supporting design requires no support..
extra wide telescoping steps for more comfort when boarding. Extra tall, comfortable handrails for easy boarding..
Stainless Steel 316 tubing * Telescopes and flips up *Rear Entry Ladder * Quick release mounting brackets * 400 lb. capacity.
Ladder is constructed of 1.5″ diameter .316 stainless steel tubing..
Comfortable 2″ Wide steps.Hole Diameter: 1/4″ (** mounting hardware is not included) ..

Check Stock

M MINGLE Garden Hose Adapter, 3/4 Inch Female GHT to 1/4 Inch NPT Irrigation Tubing, Brass Faucet Connector, with Extra 8 Washers

Includes 4 pieces brass faucet adapters (each has a washer inside), 4 pieces stainless steel lock cap parts and 8 pieces extra garden hose washers..
The hose adapter provide safer connection between irrigation tubing drip and garden hose. Barbed part of adapter and the stainless steel lock cap tighten the tube. The double connector ensures no leakage..
The female adapter with 3/4 inch thread fitting, fits any 3/4” male GHT (garden hose thread) watering equipment. Such as garden hose, hose splitter, inline hose filter, hose shut off valve and outdoor faucet..
The brass adapter with 1/4 Inch male NPT, connect to most 1/4 inch tubing hose. Fits PE tubing, PU tubing (outer diameter: 6mm, inner diameter: 4mm ), PVC drip irrigation tubing (OD: 7mm, ID: 4mm)..
AMZ Tool is professional on Garden Hose Accessory and always stand behind our products, please free to contact us if any questions..

Check Stock

Amarine Made 3 Step Premium Stainless Folding Rear Entry Pontoon Boat Ladder w/Extra Wide Step

Heavy duty all welded 316 stainless steel pontoon ladder. Unique universal self supporting design requires no support..
extra wide telescoping steps for more comfort when boarding. Extra tall, comfortable handrails for easy boarding..
Stainless Steel 316 tubing * Telescopes and flips up *Rear Entry Ladder * Quick release mounting brackets * 400 lb. capacity.
Ladder is constructed of 1-1/4″ diameter .316 stainless steel tubing..
Comfortable 2″ Wide steps.Hole Diameter: 1/4″ (** mounting hardware is not included) ..

Check Stock