ReviewsSeamless Steel Carbon Pipe

YG-1 - J0283 J0 Series Vanadium Alloy HSS Spiral Pointed Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 8-32 Thread Size, H3 Tolerance

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Tobacco, Pipes, and Race in Colonial Virginia: Little Tubes of Mighty Power

  • ...lls for mounting or installing pole lights next to your shed. Use them to attach pipes to floor joists and stop the knock when the washing machine starts, or use them to screw light bars onto decks. Light colors work well for decorative pipe stands. For PPR PVC iron pipe or copper pipe.
  • ✈ High Quality Safety Metal Carbon Steel: These U-shaped bracket tubes are made of black carbon steel, it is highly resistant to corrosion and rust, it can withstand different weather conditions and even strong wind. Resists thermal expansion and contraction. Suitable for indoor and outdoor use. Robust construction. High hardness. Strong bearing capacity, not easy to deform..
Check Stock

Hilitchi Fuel Line Petrol Clip Pipe Pliers 9 Inch Fuel Filter Calipers Fuel Line Pliers and 80 Degree Disconnect Pliers Push Pin Pliers Set (Pack of 3)

  • ✅[QUALITY MATERIAL] Our fuel line pliers are made of quality carbon steel, high strength and with PVC handle, it makes you feel more comfortable and no hand fatigue during operation. Maximum opening approx 85mm/3.35inches. Suitable for installation of automotive water pipes and removal of spring bundle. Like fuel line, gasoline pipe, urea pipe, oil pipe..
  • ✅[QUICK DISCONNECT PLIERS] Featuring with black oxidation treatment, this disconnect pliers is made of high strength carbon steel and with durable spring, it surely will ensure a smooth operation experience for you. Low-profile design with 80 degree bend allows the tool to fit between the top of the fuel tank and vehicle..
  • ✅[9” PLIERS] Fuel filter caliper also made of carbon steel, featuring with a flexible spring, you could make it to the appropriate opening you want. Maximum opening approx: 32mm/1.26in. Also, they universally fit for all automobiles, suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters.
  • ✅[NICELY-PACKED PACKAGE] This fuel line pliers kit includes a hose pipe clamp, 80 degree disconnect pliers and 9 inch fuel filter calipers. Nice and neatly packed. All of the pliers are packed in a quality leather zipper bag. Elastic straps sewn ....
Check Stock

VEVOR Commercial Grease Interceptor 8 LB, Carbon Steel Grease Trap 4 GPM, Grease Interceptor Trap with Side Water Inlet, Under Sink Grease Trap for Restaurant Canteen Factory Home Kitchen

  • ...ase interceptor, whose flow rate is about 4 GPM (15.14 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
  • Coated Carbon Steel: Our 8 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
  • Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting: You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it....
Check Stock

3 Inlet NETAMI Carbon Fiber Stainless steel Exhaust Tip 3 Inlet Purple 3 Inlet/4 Outlet

  • Made of High quality stainless steel with carbon Fiber finished.
  • Real Glossy Carbon Fiber with UV protection will never Fade or Rust.
  • Come with a Custom Clamp, fits 3" stock pipe.
  • Please measure your factory pipe before place the order.
Check Stock

Tailpipe Cutter, Exhaust and Tailpipe Cutter Apply to Cut Pipes 3/4-Inch to 3-Inch in Diameter

  • APPLICATION:Use tools to cut pipes with diameters of 3/4 to 3 inches..
  • CARBON STEEL:Exhaust Pipe Cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable..
  • ANTI-SLIP:The handle is good thickness and non-slip, easy to operate..
  • GOOD PERFORMANCE:Tools work well in areas that are hard to reach.Double wall tube will not be cut..
  • EASY TO USE:The fifteen blades effectively cut the pipe, so complete cutting takes only 1/4 circles..
Check Stock

2.5 inch Inlet NETAMI Carbon Fiber Exhaust Tip Clamp-on (Purple, 2.5'Inlet/4' Outlet)

  • Made of High quality stainless steel with carbon Fiber finished.
  • Real Glossy Carbon Fiber with UV protection will never Fade or Rust.
  • Come with a Custom Clamp, fits 2-1/2" stock pipe.
  • Please measure your factory pipe before place the order.
Check Stock

NETAMI Carbon Fiber Exhaust Muffler Tip Clamp-on 2.25 to 3.5 inch Blue

  • Made of High 304 quality stainless steel with carbon Fiber finished.
  • Real Glossy Carbon Fiber with UV protction will never Fade or Rust.
  • Come with a Custom Clamp, fits over 2-1/4" stock pipe.
  • Please measure your factory pipe before place the order.
Check Stock

NETAMI Carbon Fiber Exhaust Muffler Tip Clamp-on 2.25 to 3.5 inch (Purple)

  • Made of High 304 quality stainless steel with carbon Fiber finished.
  • Real Glossy Carbon Fiber with UV protction will never Fade or Rust.
  • Come with a Custom Clamp, fits over 2-1/4" stock pipe.
  • Please measure your factory pipe before place the order.
Check Stock

MOSTPLUS 28mm Exhaust Pipe Expander Stretcher Tool Set 1-5/8" to 4-1/4", Expander Tool for Tail Pipe Tube with Storage Case

  • [ Package Include ] --- 1 x Exhaust Pipe Stretcher Expander Kit & 1x Carry Case.
  • [ Material ] --- All collets are made of Aerospace-grade 6061 Aluminum, while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity then extended service life.
  • [ Function ] --- Used to expand the low-carbon steel exhaust pipe, and make the exhaust seal with a smaller diameter pipe.
  • [ Expanding Range ] --- The exhaust pipe stretcher offers various collets for a broad expansion range includes: Steel expander 1 5/8"-2" Collet.
  • [ Easy Opeartion ] --- Choose a proper collet, clamp the pipe, then expand the pipe. Use 1/2" or 3/4" impact wrench will save more effort.
Check Stock

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
Check Stock