ReviewsSeamless Steel Fittings

Cold Steel MAA Hand-and -a-Half Sword , Black

CONVENIENT TRAILER E TRACK KIT - This kit includes everything you need to get you started with your E Track System! The kit includes E Track Rails, Ratchet Straps, E Track Fittings with O-Ring, J Hook Fittings, End Caps and a storage bag!.
EASY TO USE - The included Cargo Straps, O-Ring Tie Downs, J-Hook Fittings, and Storage Bag all have E-Fittings which makes it easy to snap them in and out of the E Track Rails so you can customize your setup depending on what you are hauling..
BUILT TO LAST - Our E Track Rails, Cargo Straps, and E Track Accessories are made from high-quality materials such as galvanized steel and 6,000 lbs polyester webbing. They're strong and durablE - so you can secure your cargo with confidence..
KIT INCLUDES - (4) 5' Horizontal E Track Rails, (8) Plastic End Caps, (6) Straps (12', 16' and 20', 2 each), (4) O-Ring Fittings, (2) 2" J Hook Fittings, (2) 4.5" J Hook Fittings and (1) Storage Bag. NOTE: Hardware to fasten the Track not included..
SPECS - E Track Rails Made of 12-gauge Galvanized Steel | Cargo Straps Working Load Limit (WLL): 1,467 lbs. |....

[Complete Brake Line Replacement Kit] This complete stainless steel kit contains all parts necessary to replace a 3/16” brake line.
[Marine Grade] Our stainless steel brake lines are manufactured using 316L stainless steel with added molybdenum for superior corrosion proof properties.
[Extreme Strength] The included stainless steel fittings provide 2x the tensile yield strength as mild steel or brass fittings.
[16 Fittings Included] (2) 3/16 (7/16-24 Inv), (4) 3/16 (3/8-24 Inv), (2) 3/16 (M10 x 1.0 Bub), (2) 3/16 (M10 x 1.o Inv), (2) 3/16 (9/16-18 Inv), (2) 3/16 (1/2-20 Inv), (2) 3/16 (M12 x 1.0 Bub).
[Meets All Specifications] Meets all SAE J16776 and ASTM A249 specifications.
[Lifetime Warranty] All of our products are backed by our 4LifetimeLines Limited Lifetime Warranty.

Eliminate The Guesswork Of Which Wrench Is Needed To Tighten, Remove Or Check Steel Braided Hose Fittings.
Prevents Damage To Fittings And Is For Fittings.

Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.

... ✔ VERSATILE SNATCH BLOCK. Our snatch block is compatible with ⅜ inch wire rope, which makes it compatible with both steel core (IWRC) wire rope and fibre core (FC) wire rope options. Choose the wire rope that’s right for the job at hand!.
✔ GREASE FITTINGS FOR MAXIMUM SWIVEL. Our snatch block and shackle utilizes grease fittings, also called Zerk fittings or Alemite fittings, to continually move lube from a grease gun to the fitting point at the top and sides of the snatch block..

EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo).
READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included).
5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.