ReviewsSeamless Steel Pipes For

Tailpipe Cutter 3/4 to 3 Inch, Carbon Steel Chain Exhaust Pipe Cutter Tool, Tube Cutting Pliers for Cutting Exhaust Pipe Copper Pipes

  • Easy Cutting: Use our exhaust tube chain cutter to quickly achieve cutting exhaust pipes, the cutting diameter of the product ranges from 3/4" to 3" (19-76mm), and can cut thin wall pipes up to 2.5mm thick.
  • Unique Design: The tail pipe cutter adopts an adjustable chain lock design, the chain length is 30cm. The riveting process makes our tube cutting pliers not easy to loosen and deform. Fine-tuning screws are designed at the rear of the product to ensure that the cutter is in close contact with the pipe.
  • High-Quality Material: The exhaust tail pipe cutter is made of high-hardness carbon steel material, which is durable, corrosion-resistant, and effectively prolongs the use time of the product. Comfortable coated handle on the surface, safe and non-slip, relieve your hand pressure.
  • Wide Range of Applications: Our tailpipe cutter are very suitable for cutting exhaust pipes, plastic pipes, low carbon steel pipes, copper pipes, etc. They can be used without electricity. They are very suitable for you to use outdoors and help you solve the difficult problem of cutting pipes outdoors.
  • Easy to Carry: The exhaust cut off tool is moderate in size, can enter a narrow space for work, and is easy to carry and store, greatly saving your storage space.
Check Stock

KUNTEC Tailpipe Cutter 3/4-Inch to 3-Inch Exhaust Pipe Cutter Tool with 15 Blades

  • This tailpipe cutter is designed for both on and off the car cutting of tailpipes and exhaust pipes with diameters of 3/4 to 3 inches (19-76mm).
  • The Exhaust pipe cutter features 15 blades, there is a cutting wheel on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting.
  • Exhaust pipe cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable.
  • The rubber handle is good thickness and non-slip, easy to operate.
  • Cuts pipe up to 3mm thick. It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc.
Check Stock

Tee Equal Diameter 316 Good Sealing Compression Ferrule Connector Tee for Solar Energy for Chemical Industry for Complicated Pipeline(Ф8)

  • 【Advantage】 Relatively common national standard connector double ferrule straight‑through connector, acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • 【Application】 Suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • 【Structure】 Compression ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • 【Good Sealing Perfomance】 When the ferrule and the nut are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • 【Reusable】 Ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble. Break the traditional installation method..
Check Stock

KUNTEC Exhaust and Tailpipe Cutter for Cut Pipes 3/4-Inch to 3-Inch in Diameter

  • This tailpipe cutter is designed for both on and off the car cutting of tailpipes and exhaust pipes with diameters of 3/4 to 3 inches (19-76mm).
  • The Exhaust pipe cutter features 15 blades, there is a cutting wheel on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting.
  • Chain pipe cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable.
  • The rubber handle is good thickness and non-slip, easy to operate.
  • Cuts pipe up to 3mm thick. It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc.
Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф10)

  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф8)

  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф6)

  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф3)

  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф12)

  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

LJSF clamp 2 Pieces of 304 Stainless Steel Hoop Extension Welding nut Round Hose clamp Suspension Pipe clamp Industrial Household Fasteners Simple to use and Durable (Size : 15 19MM)

  • 5-22mm spring clamp fuel pipe hose water pipe air pipe clamp fastener.
  • Suitable for air hoses, water pipes, fuel pipes, silicone vacuum hoses.
  • These spring clips are made of 65 Mn spring steel.
Check Stock

Bswox Bottle openers,Bottle Opener with Magnetic Cap Catcher - Pop Can Opener – Stick to Refrigerator for Easy Storage to Avoid Loss - Easy Picking-up

  • SIZE - 1/2" Steel Pipe, 30 Inches (76.2cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 1/2" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective painting at both ends makes pipes hard to screw into fittings, please remove the black painting. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 1/2" pipes. (O.D. of these pipes: 20.2mm.
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs. You can also find standard NPT 1/2.
Check Stock