ReviewsSeamless Straight Pipe

GM Genuine Parts 42626074 Turbocharger Intercooler Hose, Black

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.C.
Check Stock

Dremel MM722 Flat Blade Kit

  • Dremel Multi-Flex saw blades are great for straight cutting of a variety of materials including wood, PVC, and copper pipe.
  • This product is easy to use easy to install and highly durable.
  • Saw Blade Kit (3) - General straight cutting of a variety of materials (wood, PVC, copper pipe).
Check Stock

Shark Industries PN-12248 Wrap-Around Pipe Template with Metal Clip for Welders and Pipe Fitters, 4' W x 60' L

  • Flexible Pipe Template – Flexible material allows pipe fitters, welders and layout men to easily wrap it around pipes and make precise marks.
  • Large Coverage Size – Each template for pipe cutting measures 4 inches in width and 60 inches in length, and is made from flexible gasket material with resistance to heat and cold.
  • Printed Markings – You’ll find a variety of markings, including a measurement scale, a protractor and a 45-degree angle and other helpful markings.
  • Metal Clip Included – Secure the wrap to pipes with the included metal clip.
  • Mark Straight Lines – Another benefit of the template wrap is that you can use it as a straight edge when marking a pipe prior to welding or cutting.
Check Stock

WORKPRO 14-inch Pipe Wrench, Heavy Duty Straight Plumbing Wrench, Drop Forged, Blue

  • Integrated Heel Jaw: The integrated heel jaw and handle offer higher strength and hardness, which can prevent deformation or breaking. Using drop-forged treatment protects the wrench from damage in harsh conditions..
  • Heat Treated Jaw Teeth: The straight pipe wrench teeth have strong, non - skid, wear, and corrosion resistance properties. Heat-treated machining teeth allow the pipe to be gripped firmly so that it does not slip and hurt your hand or arm..
  • Adjustment Nut: The smooth rotation between the nut and the hook jaw allows you to easily and quickly adjust the size of the opening, improving work efficiency. Nut surface knurled anti-skid treatment, have anti-skid, and corrosion resistance properties..
  • Ergonomically Designed Handle: The I-beam handle's wide design provides excellent weight distribution. Compared to traditional wrenches, our wrench is easier to handle and provide greater torque..
  • Application: 14-inch adjustable plumber wrench is ideal for pipe diameters of 1/2 inch to 2-3/4 inches with a pipe capacity of up to 2-3/4 inches. This straight plumbing wrench is versatile enough to be professional, Suitable for all pipe related home improvement repairs that need a tight grip, such as gas tank repair, household plumbing, vehicle maintenan....
Check Stock

FGJQEFG 3 Inch DIY Custom Mandrel Exhaust Pipe Tube Pipe, 40 Inch Straight Pipe, 3''OD Straight & Mandrel Bend Pipe(45/90 Degree) Kits, T304 Stainless Steel, Universal Fitment - 3PCS

  • 【Material】Universal DIY Custom Mandrel Exhaust Tube Pipe Made of High-Quality T-304 Stainless Steel, Strength and longer life, Excellent resistance to corrosion and oxidation resistance..
  • 【Size】Outside Diameter: 3 Inch / 3'', Bending Angle: Straight/45/90 Degree..
  • 【Easy To Use】Construction to maintain OD/ID size integrity for easier installation, Polished pipe is great for DIY project..
  • 【Package Includes】1 X Straight Tube Pipe, 1 X 45 Degree Tube Pipe, 1 X 90 Degree Tube Pipe(100% Brand new, Never been tried or installed). Efficient packaging to save on non-box and oversize fees..
  • 【Applications】Universal Fitment(Exhaust system or industrial materials). Easy for common exhaust systems. (Professional installation is highly recommended, Instruction is not included)..
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • ...rate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect your original tip from sunlight and rain, avoid rust and deformation. It provides your vehicle with a stylish look. Compared with rusty exhaust pipes, it has a long service life..
  • 【Installation】: The installation process does not require replacing any parts, nor does it require drills or welding, only two bolts are required to install the tip to the pipe, tighten the screws and fix the bolts, and the exhaust head can be easily fixed on the exhaust pipe..
Check Stock

MUXIANG Ebony Tobacco Handmade Smoking Pipe Straight Stems with 10 Pipe Accessories AC0007

  • The pipe kits box have : 1 x Ebony wood Tobacco pipe,1 x Folding Pipe Rack,10 x Cotton Cleaners,1 x 3 in 1 Stainless Steel Pipe Scraper,2 x 9mm Filter,2 x pipe metal screen ball,2 x rubber pipe Bits,1 x Cloth Bag,1 x Cork Knocker,1 x Pipe cleaning Brush,1 x Paper Box..
  • Straight tobacco pipe with 9mm filter,Very affordable pipe for beginners..
  • Exquisite workmanship with an original design.
  • Great for beginners or collectors as a gift, For more products or tobacco accessories please click " by MUXIANG"..
  • 100% satisfaction guaranteed: If there is any quality within half a year, it will be exchanged free of charge. Free exchange the stem replacement but little freight for lifetime, Or Just purchases the stem replacement (ASIN: B07CCJSB1D ), which fit this pipe. MUXIANG is the international pipe brand you can trust, so any question, please feel free to contact us, you will be satisfied!.
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock

Jackson Safety Pipe Measure Tool, Wrap-Around Tape, Flex Angle Measuring, Marking Gauge 3” to 6” Diameter, Medium, Black, 14752

  • PREMIUM PIPE MEASURER – Easy to use marking tool designed for pipe fitters and welders as economical measuring tape tool for marking straight lines around pipes, enabeling superior precision at all times.
  • HEAT RESISTANT MATERIAL – Comes in black and made from a flexible gasket material with resistance to both low or high temperatures up to 350º Fahrenheit.
  • PRINTED SCALES – Tape printed with a scale in inches, and features an inch chart, tangent chart, and other helpful markings to assist you in making straight lines around pipes.
  • DIAMETER RANGE – Flexible pipe angle measuring tool has a marking scale from 3 88" to 4'.
  • magnetic marker holder designed to gauge pipe diameters that are sized 3" to 6".
  • SAFETY STANDARDS – Unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.
Check Stock

RIDGID 31115 Model 848 Aluminum Straight Pipe Wrench, 48-inch Plumbing Wrench

  • Professional strength aluminum pipe wrench is nearly 40% lighter than comparable same-size heavy-duty models with the same durability and ease of use.
  • Sturdy I-beam handle with full floating forged hook jaw for superior gripping and quick adjustments.
  • Aluminum pipe wrench features a non-stick adjustment nut, and self-cleaning threads with easily replaceable hook jaw, heel jaw and spring assembly.
  • Straight pipe wrench is suitable for all types of pipe work.
  • 48-inch (1200 mm) pipe wrenches are ideal for pipe diameters of 3 inch (80 mm) to 5 inch (125 mm) with a capacity of up to 6 inches (150 mm).
Check Stock