ReviewsSeamless Tubing Pipe

IEason,Men Stainless Steel Watch Analog Quartz Movement Wrist Watches Silver B

  • Insulated copper coil line set is made in USA..
  • The 16 Ft. line set is insulated high quality copper tubing. Seamless pure copper pipe shows no leaks, which is divided into 1/4" low and 1/2" high....
  • With embossed polyethyene film, climate resistant foam, and 3/8 inch thickened insulated cotton, this three-layer insulated mini split copper line set....
  • The insulated copper twin line set has been successfully tested by Method ASTM G154. No cracking at low temperature of -40 ° F, no deformation at....
  • Package Include: insulated line set*1, wall sleeve cylinder*1, decorative wall cap*1, wall filler putty*1, non-adhesive decorative wrapping tape*1,....
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • Mini Tubing and Pipe Cutter: our tubing cutter is especially designed to assist plumbers, electricians and mechanics.
  • It is made of heavy duty alloy steel, this tube cutter mainly use for cutting copper, brass, aluminum and thin steel pipes.
  • Tube pipe cutter makes clean and precise cuts.
  • Various Tube Cuts: this tubing cutters will efficiently cut copper, brass, aluminum, thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
Check Stock

VEVOR Pipe Notcher Punch and Press Tool for 0-50 Degree Tube Notcher Tool Notches 3/4\-3\ Round Tubing Bore Hole Pipe Knotcher Aluminium Frame Tubing Notcher for Cutting Holes Through Metal, Wood.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. Hole saw not included..
  • Sturdy Construction: The tubing and pipe notcher is made of premium A3 low-carbon steel, make the notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-50 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Simple Operation: Ergonomic design and built-in protractor make it easy to use. The pipe notcher tool can work with a 1/2" drill for grooving 3/4" to 3" pipe, vise, or benchtop mount..
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock

MATEWORK Pipe Cutter - Fast Tubing Cutter Set with Mini Cutter & Deburring Tool Pipe Cutter Tool for Cutting 3/16 to 2 Aluminum Copper PVC Stainless Steel Tube for Plumber and Home Working 3PCS

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft ste....
Check Stock

Ridgid 64962 No. 73 Plastic Pipe and Tubing Deburring Tool, 1-1/2 to 3-inch plastic pipe capacity

  • This product manufactured in United States.
  • Removes the outside ridges and inside burrs on plastic pipe and tubing.
  • Features specially-designed, long-lasting cutting edges.
  • Incorporates a slip-resistant vinyl hand grip for added control and leverage.
Check Stock

Tanstic 3Pcs Ratchet PVC Pipe Cutter Tool and PEX Straight Cut Pipe Cutter with Mini Tube Cutter, Ratchet-type Pipe Cutter One-hand Fast Pipe Cutting Tool PEX Tube Cutters for Pipe Cutting

  • ✔️[Package Includes] You'll get 1pc ratchet-type pipe cutter with max opening of 1-5/8 inch (42mm) and 1pc straight pipe cutter with max opening of 1-3/8 inch (35 mm), 1pc mini tubing cutter, total of 3pcs, which can meet your needs of daily use..
  • ✔️[High-quality Material] Our blades of pipe cutters are made of high-quality SK5 material with Teflon-coated on the surface, durable, sturdy, sharp, not easy to rust or break, high-hardness, good-toughness, which can be used for a long time and help to cut the pipe accurately and effectively..
  • ✔️[Ratchet PVC Pipe Cutter] The large pipe cutter in this kit adopts ratchet drive technology, which enable you to complete the cutting operation with one hand, labor-saving. Besides, this ratchet drive design can provide the function of automatic locking during the cutting process, which can protect users from injury caused by the rebounding blade. And the ergonomic handle is equipped with rubber, comfortable to grip, anti-slip..
  • ✔️[Straight Cut Pipe Cutter & Mini Tubing Cutter] The handle of the straight pipe cutter adopts the lever principle, labor, saving, light, handy. You just need to put the pipe into the knife edge, and then pull and tighten the handle to cut the pipe accurately and evenly. Besid....
Check Stock

General Tools RW121/2 Replacement Cutter Wheels Set of 2

  • The General Tools and Instruments RW121/2 gold standard tubing cutter wheel is the new quality standard replacement cutter for General Tools tubing....
  • General Tool's gold standard cutting wheels are made from tempered, bearing tool steel for smooth, exact pipe cuts.
  • The slim-line surface geometry ensures fewer inner surfaces burrs and less chance for outer surface distortion.
  • The RW121/2 replacement cutter wheel is designed to fit all General Tools tubing cutters, Pro or Classic series.
  • The combination of shape, strength, and durability enable these cutter wheels to repeatedly provide quicker cutting without deforming the pipe's outer....
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ...Y MATERIAL】Pex crimp ring meets ASTM F2098 requirements that adopts 304 Premium Stainless steel material, which features sturdy and durable. Has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applications. Providing a s....
Check Stock

ABN Exhaust Pipe Cutter Tool - 3/4 to 3 Inch Exhaust and Tailpipe Cutter Chain Exhaust Cutter Tool Muffler Pipe Cutter

  • CUT PIPES EASILY: Quickly remove old exhaust pipes with the ABN Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness.
  • ACCESS HARD TO REACH AREAS: 10 inch (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts.
  • DURABLE CUTTING BLADES: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels.
  • EASY TO USE: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • COMFORTABLE GRIP: 9.3 inch (23.6cm) exhaust pipe cutting tool has 3.8 inch (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security.
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

Malida 3/8" Diameter Tubing 5 Meters (16 feet) RO water Tubing Hose Pipe,+3/8" shut off valve 2 pcs, 3/8" tee 2 pcs. (3/8"tubing + valve +tee)

  • High quality,CCK brand,NSF certification..
  • Tubing: 16Ft (5m) ,shut off valve 2 pcs, tee 2 pcs..
  • PE Tubing Hose Pipe for RO Water Reverse Osmosis.
Check Stock