ReviewsSeasonic Sfx Psu

TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm

【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..

Check Stock

JZYMOD EPS12V CPU 8 Pin Female to CPU ATX 8 Pin (4+4) Male Power Supply Extension Cable

Connector A:EPS12V 8 Pin CPU Female Connector.
Connector B: ATX12V 8 Pin (4+4) Male Connector.
Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket or 4-pin +12V socket..
Built to last: Thick 18AWG wire gauge for heavy-duty use. Fully black flexible flat array design allows for neat builds and good airflow inside your case..
What You Get: EPS12V CPU 8 Pin Female to CPU ATX 8 Pin (4+4) Male Power Supply Extension Cable, user manual, 12-month warranty, and our friendly customer service..

Check Stock

Segotep Slath Mini ITX PC Gaming Computer Case Double Curved Tempered Glass Side Panel GPU Vertical Mounting Cable Management System SFX PSU Supported Slath Mini

Double curved tempered glass panel, IMAX borderless field of view, graphics card can be seen on three sides..
Designed for MINI ITX graphic card, MAX GPU length is 200mm..
Supports Mini ITX motherboard, SFX PSU and 240mm radiator..
High efficiency cooling design, 2 x 120mm reverse cooling fan which installed in bottom of the case, 240mm water cooling supported on the rear and special power supply cooling holes..
Great cable management, hidden cables design on the top, magnetic washable dust-proof net..

Check Stock

JZYMOD EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable

Connector A:EPS12V 8 Pin CPU Female Connector.
Connector B: ATX12V 8 Pin Male Connector. Connector C: ATX12V 4 Pin Male Connector.
Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
Built to last: Thick 18AWG wire gauge for heavy-duty use. Fully black flexible flat array design allows for neat builds and good airflow inside your case..
What You Get: EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable (10.6in), user manual, 12-month warranty, and our friendly customer service..

Check Stock

SGPC Itx Mini Case - K49 Aluminum /Upgraded Version of K55 ,Full-Size GPU Compatible,Include GPU PCI-E Riser,2 Handles,2 Acrylic Vented Side Panels / 6.5L Small Itx Case

Made of 1.5 mm aluminum.2 pcs 3.0 mm acrylic vented side panels.With 4 silver round mats(7 mm).
GPU:The graphics card length < 300mm(11.81 inches), thickness < 43mm(1.69 inches).Includes a custom GPU PCI-E riser.
CPU COOLER:Thickness < 55mm(2.16 inches).

Check Stock

darkFlash DLH21 PC Case Mini Tower Type ITX Case High Cooling Performance High Compatibility Gaming Case with USB 3.0 Type-C Interface (Black)

[Excellent Heat Dissipation And Dust Resistance]5 panel meshed with magnet dust filter installed,impressive heat performance,and keeps the inside clean..
[Fast Detach Design]Magnetically connect top panel,easy to remove.Back grommet gathers the cable,clean cable management..
[High Compatibility Hardware]Compact interior, capable of installing 125mm SFX PSU, 240mm Radiator (or 1 x 3.5'' HDD + 120mm Fan), 310mm GPU, 134mm height CPU cooler and 2 x 2.5'' SSD..
[High-Quality Material]Made with 0.8mm steel, resistant to everyday use..
[Dual PCI-E Slots]Supports up to 2 slot GPUs, max length 310mm, max width 147mm.(Slot plate can be reinstalled.).

Check Stock

MATX Case Aluminum Mid Tower PC case Supporting ATX PSU Desktop DIY Computer Case for Gaming Home and Office use…

Mid Tower MATX PC Case C1: Large size 12.33*6.5*16.86 inch and 22L capacity, can be compared with Full Tower computer case.
Compatible with ATX PSU: Support ATX/SFX power supply, mATX/dtx/itx motherboard, 2*2.5''HDD+ 2*3.5''HDD, 6 fans max for air and liquid cooling.
Unique Bottom I/O interface Design: To keep the desktop clean and tidy, the I/O and wire ports set on the bottom, which is rare among the matx....
Special Space Dark Grey Color with one side tempered glass transparent design: ZZEW's special full aluminum alloy is oxidized into space gray color,....
Hign efficient heat dissipation: The four side mesh hollow out design makes the heat dissipation effect of micro ATX C1, beautiful and efficiently at....

Check Stock

JONSBO D31 MESH SC Black Micro ATX Computer Case with Screen M-ATX/ITX Mainboard/Support RTX 4090 335-400mm GPU 360/280AIO,Power ATX/SFX 100mm-220mm Multiple Tool-Free Design pc case

Note : If the screen has compatibility problems during installation, please contact customer service for solutions. (AIDA64 software needs to be purchased by users).
D31 "Pine cone" series-Mesh Screen PC Case， size 205*363*452mm.
Computer Case Motherboard : MATX/MicroATX.
Air cooler:168mm high-order / Support AIO:360/280/240 (Top) 360/240 (Bottom).
GPU:330-400mm PSU: ATX/SFX:100mm-220mm L max.

Check Stock

OwlTree 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard 10.6 inch

Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).

Check Stock

anidees AI Atomic Mini ITX Small Form Factor (SFF) Case, Triple-Slot and Two Vertical-Slot GPU, with Mesh Panels, Support 240 Radiator, AI-at-ITX (PC Case ONLY)

【All Disassemble 】 Every part on the case can be removed by a screwdriver, it will be easy to make you what you want to do.
【Excellent Thermal Efficacy】 Improve your system's cooling with a high airflow layout, complete with a steel grill front panel for optimal air intake, Support up to 6 x 120mm fans or 240 Radiator at the bottom.
【 Wide Compatibility 】 Support mini-ITX motherboard.
Triple slot GPUs are supported with a maximum Graphics card length 12.5 in / 320mm.
SFX PSU, Mechanical design available for Kensington lock..
【 User Friendly】 Full Removable Dust filter for easy maintenance. Released USB Type C, 2 x USB 3.0, microphone, 3.5mm audio jack on the top..
【 Compact Size】 Small size with Powerful internal layout, support 1 x3.5”HDD and 4x 2.5 SSD, or 5x 2.5SSD, only 19.5L Volume (15.3 x 6.8 x 11.4 in / 390 x 173 x 290 mm)..

Check Stock

AKLLA A4 Pro SFF Small Mini-ITX Case , 2-3 Slot GPU, with 3.0 PCI Riser Cable … (Snow White, A4 Pro)

... on the top to ensure fast heat discharge. Support inter and AMD advanced CPU..
Strong compatibility: flexible adjustable holder, compatible with two modes: CPU cooling height of 65mm, GPU thickness of 59mm.
Or the CPU cooling height is 73mm, then the thickness of GPU supports 51mm, the length of GPU supports 330mm, SFX / SFXL PSU supply, 2.5 & 3.5 hard disk, with high space utilization..
Quick assembly experience: the cooling side plate adopts Falcon structure, the slide rail type installation is faster, the top cover supports quick opening, and the internal components are easy to access..
Excellent material: 4-20mm thick T6 aviation aluminum, processed by CNC high precision numerical control machine tool, gray surface sandblasting anodization, white surface sandblasting anodization, electroplating white, perfect quality and exquisite appearance..
It is not only suitable for home office and entertainment, but also suitable for DIY electronic games, we media, designers, editors, 3D rendering, programmers and workstation users..
Optional accessories: Aluminum inlaid acrylic side lens, support 120 / 140 / 240 / 280 water cooling expansion, support PEIC 4.0 GPU graphics card extension cable, and 3.5 hard disk expansion holder..

Check Stock