ReviewsSecondary Air Injection Pump Pulley Kit

JIFETOR Universal Auto Gasoline Gas Fuel Injection Pressure Tester Gauge Tool Set Only for Bosch CIS System Car Truck SUV Motorcycle ATV RV SUV Blue Case

  • BOSCH CIS DEDICATED SYSTEM: Fuel pressure test gauge kit includes 1PC fuel pressure gauge tester with rubber hose and drain hose, 1PC hose assembly for Bosch CIS (Continuous Injection System), and 9PCS metal adapters. More professional, more efficient. Specifically recommended for use with import and domestic gasoline vehicles including cars, SUVs, and trucks using Bosch CIS systems. If you need a full system of fuel injection pump set please serach for B085TM8577 in our store..
  • FUEL INJECTION GAUGE TESTER: Fuel pump pressure tester is an essential part of the troubleshooting process of automotive fuel injection systems. Gauge is made to detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters. Fuel injection tester features 4" big dial, built-in hoses with pressure relief valve, and quick coupler system. Low pressure range (0-140 psi/0-10 bar) makes it limited to gasoline engines for fuel pressure test..
  • HOSE WITH METAL ADAPTERS: Fuel pressure gauge set contains 1PC built-in 43" long rubber hose with 44" clear drain hose, and 1PC 27.5" Bosch CIS- specific hose valve assembly for test connection. Rubber hoses endure torsion, temperature and pressure extremes to ensure safe use. Brass for corrosion resistance, and ducti....
Check Stock

Insta-Bed Raised 18 Inch Queen Air Bed w/NeverFlat pump

  • Crafted from the highest quality material.
  • Two pumps in one bed. The patented neverFLAT pump system silently keeps your airbed inflated all night. Guaranteed!.
  • The primary pump automatically inflates and deflates your airbed in less than 4 minutes. The secondary neverFLAT Pump monitors and silently maintains the air pressure to your desired comfort level while you sleep. Convenient auto-shutoff feature on primary pump automatically turns the pump system off when the airbed is fully inflated or deflated.
  • 35 circular coils on the Queen size and 21 circular coils on the Twin size create a strong, supportive, and level sleep surface.
  • 18" raised height makes getting into and out of bed easier.
  • Included carry bag for convenient storage and travel.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

TOYAN FS-L400 14cc Inline Four-Cylinder Four-Stroke Water-Cooled Nitro Engine Model DIY Assembly Kit for 1:8 1:10 1:12 1:14 RC Model Car Ship Airplane - KIT Version

  • Integrated Crank Shaft: It utilizes a 180-degree crankshaft. The ignition timing sequence of 1342 for running smoother and more sensitive acceleration response. The maximum speed is 13,500 RPM..
  • Double Synchronous Pulley: The timing structure of the dual synchronous pulley reduces the risk of gear jumping during high-speed operation. / Precision Rocker Arm: Alloy rocker arm and independent intake and exhaust design for more accurate valve switch..
  • Built-in Mechanical Pump Water-Cooled Kit: The power of the pump body comes from the crankshaft, and the pump body provides circulating power to the coolant. Later, it can cooperate with the cooling fan to enhance the self-cooling performance / Precision Carburetor: Independent four carburetors for more accurate tuning, more sensitive throttle response, and working more stable.
  • High Precision Gear Pump: High-speed structure design & corrosion-resistant material manufacturing. Large flow water pump provides powerful cooling capacity. / Lightweight: It can be better compatible with the RC model and improve the unit power output ratio.
  • Starter Kit: The engine comes with an electric starter kit, providing users with all new fun..
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
  • Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
  • Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

IWONDER Wheel Pulley Conversion kit PJ00604 5M-40T Cloud Wheel Discovery Version for Evolve Boards

  • Upgrade your Evolve board and expand your wheel collection..
  • IWonder pulley conversion kit PJ00604 compatible with Evolve GT/GTX/GTR/STOKE boards..
  • Pulley material - high strength and durability injection moulded..
  • IN THE BOX - 2 x pulleys, 2 x covers, 2 x belts included..
  • All our products are manufactured under expert supervision and adhere to quality guidelines. you can buy high-quality skateboard products and....
Check Stock

JIFETOR Fuel Injector Pump Pressure Gauge Tester Kit Automotive Gas Gasoline Fuel Oil Injection Test Tool Set 0-140PSI with Schrader Adapters Universal for Testing Auto Car Truck Motorcycle

  • FUEL PRESSURE TEST KIT: The universal fuel pressure tester tests if the fuel supply & injection system work normally, help to judge if there are....
  • UPGRADED FUEL PUMP PRESSURE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up....
  • 140PSI/10BAR PRECISION-MACHINED FUEL PRESSURE GAUGE TOOL: You just need to ensure there is an adapter in the kit suitable for your test port or the....
  • CHECK FUEL INJECTOR PUMP PRESSURE: Proper fuel pressure is vital for engine operation and performance. No matter higher or lower fuel pressure can....
  • SATISFACTORY CUSTOMER SERVICE: This fuel injection pump pressure test kit helps to find most auto fuel system issue, it is a must have kit for DIYer....
Check Stock

IWONDER Wheel Pulley Conversion kit PJ00605 5M-37T Cloud Wheel Discovery Version for Backfire Zealot/Backfire Zealot S Boards

  • Upgrade your backfire skateboard and expand your wheel collection..
  • IWonder pulley conversion kit PJ00605 compatible with backfire belt drive boards.
  • Pulley material - high strength and durability injection moulded..
  • IN THE BOX - 2 x pulleys, 2 x belts included..
  • All our products are manufactured under expert supervision and adhere to quality guidelines. you can buy high-quality skateboard products and....
Check Stock

Spectre Performance - SPE-4480 Water Pump Pulley Shim Kit

  • Use between the water pump flange and the pulley to space the pulley outwards for proper belt alignment.
  • Kit includes 3-1/16 inch shims for thickness totals of 1/16 inch, 1/8 inch and 3/16 inch.
  • Easy to install with no special tools or skills required.
Check Stock

Anbull 8KW Diesel Air Heater, 12V All in One Parking Heater, Single Air Outlet Diesel Heater with LCD Remote Control Muffler Silencer and LCD Display for RV Trucks Bus and Trail

  • 【COMPLETE ACCESSORY】- With a complete mounting kit - including all mounting screws, which means all installation kit and instruction are included. Making it easy to install and use.Also with a muffler..
  • 【ALUMINUM BODY】- The combustion chamber, the base and the heat-dissipating scale are all sand-blasted aluminum parts. It is integrally formed, featuring with uniform heat dissipation, fast heat..
  • 【ENERGY SAVING】- The optimized frequency conversion ECU accurately controls the injection frequency of the oil pump, and controls the intake air amount with the precise speed to extend the service life of the heater..
  • 【LOW NOISE】- Effectively reduce noise through blower speed control, silent fan, silent oil pump. The silent fan sleeps peacefully, and the metering oil pump adopts an improved low frequency pulse with low vibration..
  • 【WIDE APPLICATION】- This diesel air heater can be applied for heating the cab of various diesel mechanical vehicles such as cars, buses, RVs, trucks, engineering vehicles, etc..
Check Stock