ReviewsSegment For Diamond Blade

Delta Diamond Extreme 4 1/2 Inch Metal Cutting Diamond Blade, Heavy-Duty All Purpose Cut Off Wheel for Rebar, Steel, Sheet Metal, Angle Iron, Stainless Steel, & More, 5/8\-7/8\ Arbor (4.5\)

  • ...drywall, concrete, granite, and more..
  • LASTS 100X LONGER - A single Diamond Extreme blade outlasts and outperforms up to 100 abrasive cut-off wheels. Save time by using one blade without having to constantly put on a new disc after a few cuts. Diamond Extreme blades use a heavy-duty vacuum brazed diamond bonded segment and will not wear out as fast as other diamond discs..
  • CONSTANT CUTTING DEPTH & SAFER - Abrasive discs wear down and will shrink which can be dangerous. Diamond Extreme maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust..
  • SPECIFICATIONS - 4 1/2" diameter X .100 thick with a 7/8" arbor. Included preinstalled 5/8" bushing for adapting to just about any angle grinder or trim saw. The maximum safe operating speed is 13,500 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and th....
Check Stock

SHDIATOOL 4-1/2 Inch Porcelain Diamond Mesh Turbo Saw Blade Cutting Granite Marble Ceramic Tile Brick Pack of 2

  • 2pcs 4.5" Hot pressed sintered Mesh Turbo Diamond Saw blade with rim segment for cutting.
  • Diameter 4.5"/115MM, Bore 22.23MM with 22.23-20mm washer, Diamond height 10MM, Segment thickness 1.6MM..
  • Remark: Please remove the 22.23-20mm washer,if you fit the 7/8” arbor..
  • Dry or wet cutting for Hard material, granite marble tile ceramic brick.
  • New Design of Mesh turbo rim segment, the mesh turbo help to cooling and bring the dust out, so more efficient, fast and stable in cutting.
Check Stock

Delta Diamond Extreme 14 Inch 2-Pack Metal Cutting Diamond Blade Heavy-Duty All Purpose Cut Off Wheel for Rebar Steel Sheet Metal Angle Iron Stainless Steel & More 1 -20MM Arbor 14 2pcs

  • LASTS 100X LONGER - A single Diamond Extreme blade outlasts and out performs up to 100 abrasive cut-off wheels. Save time by using one blade without having to constantly put on a new disc after a few cuts. Diamond Extreme blades use a heavy-duty vacuum brazed diamond bonded segment and will not wear out as fast as other diamond discs..
  • CONSTANT CUTTING DEPTH & SAFER - Abrasive discs wear down and will shrink which can be dangerous. Diamond Extreme maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust. Commonly used by fire departments for fire/rescue situations across the country..
  • SPECIFICATIONS - 2 Pack of 14" diameter X .140 thick with a 1" arbor. Included preinstalled 20MM bushing for adapting to just about any hand held power saw or cut off saw. The maximum safe operating speed is 5,460 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at....
Check Stock

Delta Diamond Gator Blade Plus Supreme 7-Inch Wave-Core Turbo Diamond Blade for Cutting or Grinding Concrete, Masonry, Stone, Roofing Tile, Granite, Marble, DM-7/8\-5/8\ Arbor (7\)

  • SUPREME GRADE - Made with extended diamond turbo segments for added cutting and grinding performance. Supreme diamond concentration has the highest amount of diamond in each segment for superior performance on most materials such as Masonry, Concrete, Stone, Granite, Marble & anything similar..
  • WET/DRY - Designed to withstand the demands of dry cutting or grinding while delivering excellent results and finishes. Use water when you can for improved performance..
  • WAVE CORE DESIGN - Features a wave design, heat-treated steel core that increases airflow, reduces friction and allows air to be drawn in during cutting, keeping the blade cooler. This maximizes blade life while virtually eliminating warping..
  • SPECIFICATIONS - 7" diameter X .095 thick with a Diamond Knockout arbor for Skil Saws. Included is a 7/8" arbor and a 5/8" bushing for adapting to other circular saws and grinders. The maximum safe operating speed is 8,730 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the ....
Check Stock

Delta Diamond Extreme 14 Inch Metal Cutting Diamond Blade .135 Wide X 1 Arbor with 20MM Bushing Heavy-Duty All Purpose Cut Off Wheel for Rebar Steel Sheet Metal Angle Iron Stainless Steel & More 14

  • LASTS 100X LONGER - A single Diamond Extreme blade outlasts and out performs up to 100 abrasive cut-off wheels. Save time by using one blade without having to constantly put on a new disc after a few cuts. Diamond Extreme blades use a heavy-duty vacuum brazed diamond bonded segment and will not wear out as fast as other diamond discs..
  • CONSTANT CUTTING DEPTH & SAFER - Abrasive discs wear down and will shrink which can be dangerous. Diamond Extreme maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust. Commonly used by fire departments for fire/rescue situations across the country..
  • SPECIFICATIONS - 14" diameter X .140 thick with a 1" arbor. Included preinstalled 20MM bushing for adapting to just about any hand held power saw or cut off saw. The maximum safe operating speed is 5,460 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50%....
Check Stock

SHDIATOOL 2PCS 14-Inch Concrete Saw Blade with diamond Segment Wet Cutting

  • 2pcs 14"/360mm Sintered Diamond saw blade Cutting Discs for concrete.
  • Diameter 14"/360MM, Bore 25.4MM with pin hole, Diamond height 15MM, Segment thickness 3MM.
  • Wet Cutting and very competitive in cutting conrete block,Paver.
  • Innovated segment design gives clean and fast cutting.
  • If the value of your order is more than $100 in our store,we'd like to send it to you by free UPS from China. Attention: Only for American order.
Check Stock

GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Diamond Saw Blades Segment Height 0.394” (10 mm) - 5 inches

  • UNIVERSAL - 5" Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF segmented diamond cutting wheel is intended for working with Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete & Curb. Our 5" angle grinder concrete blade can be used both for dry and wet cutting..
  • INCREASED OPERATING TIME - Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE - Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY - Diamond blade for granite and stone is designed for precise cutting of concrete using small-sized angle grinders with 7/8” Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS - GRAFF concrete diamond blade 5 has teeth with soldered diamond segments all around. Diameter: 5 Inch (125 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) Adapter, Cutting width: 0.079 Inch (2 mm), Segment height: 0.394 Inch (10 mm), Segments number: 9. Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

4-1/2\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\-5/8\ Arbor

  • MULTIPURPOSE - 4.5" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

SHDIATOOL Tile Diamond Saw Blades Porcelain Cutter Disc for Dry/Wet Cutting Grinding Ceramic Marble Artificial Stone Diameter 4.5 Inches x 7/8 inch

  • Dimensions: 115x1.9x22.23mm (Diameter x Thickness x Hole),Diamond Segment Height-Front 20mm,Diamond Segment Height-Back 10mm.
  • Special Design:the double-sided cutter head,Front/back diamond segment height- 20/10mm,can allow for trim/grind on front face and make straight cuts and grind bullnose edge.
  • X Mesh turbo rim segments are Sharp and Wear-resistant,can help to cool and bring the dust out and get more efficient and better performance.
  • Hot pressed Technology with high-quality diamonds of this Tile Marble blade provides longer working life and more accurate straight line cuts.
  • Dry/Wet Cut and Grind Ceramic,Tile,Marble,Artificial Stone, Ultra-clean, spark-free and chip-free cuts.
Check Stock

16\ Laser Welded Diamond Saw Blade for Concrete, Brick, Block and Masonry, Heat Treated Blade Core, Dry or Wet, 1\ Arbor

  • MULTIPURPOSE - 16" laser welded diamond saw blades designed to cut concrete, reinforced concrete, brick, block, and other masonry.
  • PREMIUM DURABILITY - heat treated blade core reduces vibrations and core elasticity, so the blade body is rigid and cutting is smooth.
  • SHARP SEGMENTED TEETH - laser welded segments improves user safety (0.125" segment width) and drastically reducing the chance of segment breakage.
  • HIGH PERFORMANCE - superior bonding formula improves cutting speed against baseline diamond blades.
  • ARBOR SIZE & IDEAL RPM - 1" arbor & 2200 RPM.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

7\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\ Bushing w/Diamond Arbor

  • MULTIPURPOSE - 7" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock