ReviewsSegments For Gangsaw

OLFA 9mm Snap Off Replacement Blades, 50 Blades (650 Segments) ABB-50B - Ultra-Sharp Black Utility Knife Replacement Blades, Fits most 9mm Utility Knives

  • RAZOR SHARP 9mm PRECISION BLADES - Double-honed for extreme sharpness, OLFA 9mm Ultra-Sharp Black Snap Blades are 25% sharper than standard silver blades. Made from Japanese tool steel for unmatched sharpness and edge retention to work longer..
  • CONTAINS 50 BLADES / 650 SEGMENTS - You'll receive 50 blades in this refill pack. Each blade contains 13 razor-sharp ABB Carbon Steel Snap-Off segments (650 segments total). Simply snap for a new sharp blade edge..
  • COMPATIBLE WITH 9mm KNIVES - OLFA's ABB Ultra-Sharp Black Snap Blades are compatible with most 9mm knives. For best performance, pair OLFA 9mm blades with OLFA 9mm handles. Replacement blades available in quantities of 10 (ABB-10B) and 50 (ABB-50B)..
  • CUTS A VARIETY OF MATERIALS - These replacement blades provide accurate and reliable performance when cutting cardboard, wallpaper, vinyl, paper, foam board, caulking, molding, and more. Great for use at home or on the job..
  • THE OLFA STANDARD - As the original inventor of the Snap-Off Knife, OLFA has maintained a standard of cutting excellence for our quality and durability. Pairing your OLFA 9mm Utility Knife with OLFA 9mm Blades will provide optimal results..
Check Stock

Del Monte Red Grapefruit Sections in Light Syrup 15oz Can (Pack of 6)

  • SWEET AND TART FLAVOR: Roland Foods White Grapefruit Segments are sweet and tart with a pleasant juicy texture.
  • RECIPE INSPIRATIONS: Enjoy our white grapefruit segments in a delicious cocktail, grapefruit white chocolate brownies, grapefruit bars, or homemade marmalades.
  • READY TO EAT: Our white grapefruit are delicious and ready to eat as a sweet snack.
  • RESTAURANT QUALITY: Ideal for use in food service or in the home.
  • IMPORTED FROM TURKEY: A gourmet international specialty food product.
Check Stock

7 inch PCD Grinding Wheel 9 Segments for Remove Epoxy Glue Mastic Paint and Concrete Floor Surface Coating with 5/8 -11 Thread

  • 7" diameter,9 PCD segments,5/8"-11 Thread..
  • Designed for remove stubbon coating, epoxy,glue,mastics and concrete floor coatings..
  • 9 pcs PCD segments guarantee high efficiency grinding removal and long life use..
  • Precision balanced test for vibration guarantee the stable when use..
Check Stock

5 inch PCD Grinding Wheel 6 Segments for Remove Epoxy Glue Mastic Paint and Concrete Floor Surface Coating with 5/8 -11 Thread

  • 5" diameter,6 PCD segments,5/8"-11 Thread..
  • Designed for remove stubbon coating, epoxy,glue,mastics and concrete floor coatings..
  • 6 pcs PCD segments guarantee high efficiency grinding removal and long life use..
  • Precision balanced test for vibration guarantee the stable when use..
Check Stock

Moultrie 30-Gallon Leg Bracket and Pole Kit for Feeders| 3 Leg Brackets | 12 Collapsible Leg Segments

  • Convert a 30-gallon drum into a sturdy tripod feeder.
  • Includes three collapsible legs (12 total segments) and leg brackets.
Check Stock

LM YN 3D Printer Stepper Motor Driver Control Extension Shield Board for A4988 DRV8825

  • You can use the A4988/DRV8825, insert the attention direction, otherwise it will burn the drive..
  • Jumper hit ON DP indicating the position of 16 segments (4988) or 32 segments (8825)..
  • Jm is connected with the motor. Jv connection 5V and 12V-24V power supply..
Check Stock

Virginia Abrasives 425-06315 BD Asphalt/Green Concrete High-Speed Diamond Blade (14\) Wet or Dry, (14\ x .125\ x 1\/20mm DP - 12mm Segments)

  • HIGH-SPEED DIAMOND BLADE: This diamond blade is an ideal asphalt and green concrete saw blade due to the hard bond of the diamonds, which is perfect for soft materials. This blade will work well on a variety of saws..
  • GOOD DIAMOND CONCENTRATION: Our BD diamond blades are priced for affordablity with a good diamond concentration and good durability..
  • UNDERCUT PROTECTION: Designed with alternating drop segments and U-Slot gullets, BD Asphalt & Green Concrete Diamond Blade has alternating drop segments that help clear out slurry when cutting. Use in wet or dry conditions to get clean cuts..
  • DURABLE: Virginia Abrasives Diamond Saw Blades are expertly crafted using a circular steel cutting disc with 12mm segments on the outer edge. This also helps with the performance of our product in terms of precision and life span..
  • OUR STORY: Virginia Abrasives' roots date back to the early 1970s when a hard rock garnet mining business in the Adirondack mountains of New York. Our initial focus was aimed at producing the world's best sandpaper, using hard-rock garnet abrasives. Over time and due to customer requests, the company's markets as well as product lines have expanded into a broader offering for the construction trades..
Check Stock

Delta Diamond Kick-Asphalt 8 Inch Diamond Blade, Segmented, Wet/Dry Cutting Asphalt, Green Concete, Masonry Block, and Similar Materials (8\)

  • PREMIUM DIAMOND BLADE - Kick-Asphalt uses premium diamond segments and is designed to cut asphalt, green concrete (poured within 72 hours), masonry block, and similar abrasive materials..
  • 10MM SEGMENTS - 10MM tall diamond segments maximize cutting life and provide a low cost per cut..
  • DEEP U GULLETS - This unique segment/keyslot design allows for better air cooling and chip deflection resulting in better performance..
  • SPECIFICATIONS - 8" diameter X .090 thick with a diamond-7/8" arbor. Also included is a 5/8" bushing. Fits most hand-held angle grinders and circular saws. Heat-treated high-speed steel core is guaranteed to withstand the demands of dry cutting. Expected blade life is approximately 4,000 inch feet (one inch foot = 12" length X 1" depth). The recommended operating speed is 4,500 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charg....
Check Stock

3 Inch Diamond Saw Blade for Porcelain Tile Granite Marble Ceramics Cutting(5/8 Arbor)

  • Segments Height 8mm, Hole 16mm(5/8")-22.23mm(7/8").
  • HIGH GRADE QUALITY: Hot pressed provides increases durability and long life.
  • SPECIAL: Can be used Dry/Wet, desiggned to provide fast, smooth cutting in a variety of material.
  • VERSATILE: The super thin diamond cutting disc Professional grade for porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, cement backer board. It will be a perfect partner for tile installers and general homemade DIYers.
  • APPLICABLE MODELS: Suitable for tile saws, circular saws and hand-held grinders.
Check Stock

Stadea SBD103C Diamond Saw Blade 5-Inch Continuous Turbo For Grinder - Granite Dry Cutting, 8 MM Segments

  • Stadea Series Standard G - 5" Turbo continuous Diamond Saw Blade designed for Granite dry cutting.
  • Built with high quality diamond with less wide turbo segments for smooth faster cut to avoid chipping on Granite and other hard stone dry cutting.
  • 8 MM high thick segments for smooth cut and longer life, Max RPM 12000.
  • Smooth cuts on Granite and other hard stone, A real time saver for professional stone fabrication.
  • Quad hole to connect flush cut adapter for flush cuts, 5/8" to 7/8" arbor hole.
Check Stock

9\ General Purpose Diamond Saw Blades for Concrete and Brick, 7/8\-5/8\ Arbor

  • MULTIPURPOSE - 9" blade designed to cut hard/reinforced concrete, hard paver brick, refractory brick.
  • PREMIUM DURABILITY - Complete steel blade body – precise accuracy and warp resistance for perfect cuts.
  • COMPTABILITY - can be used on FLEX VOLT Cut Off Saw (DCS690) with 7/8"-5/8" arbor.
  • LASER WELDED SEGMENTS - 15mm diamond encrusted segments add cutting stability and increased tool life with performance/price ratio in mind.
  • PRECISION - Cutting depth of 2-1/4 inches (12").
  • RECOMMENDED RPM - 4000 RPM (optimum), 6700 RPM (max).
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock