ReviewsSegway I2 Cargo

KKCOBVR I2 Indoor Ir Illuminator Infrared Light Compatible for Meta Quest 2 Sensor Tracking in Dark, Anti No-Light Disturbance Increase Vision

  • PLUG & PLAY INDOOR INFRARED FILL LIGHT: Compared with the traditional infrared light, i2 is easier to use, only plug into the VR and then work. 2 gears of brightness are optional, letting you enjoy the VR in a dark environment without disturbing others. NOTE: i2 can be used normally with a battery head strap at the same time and can see VR is charging, but it does not show the power of head strap. Displaying the power level is the official patent, which cannot be done by third-party products..
  • TWO-GEAR BRIGHTNESS ADJUSTMENT: When the I2 IR light is turned on, the furniture and walls of the room will reflect infrared light from all angles, so that the infrared light fills the entire room, maintaining the sensitivity of the VR sensor in the dark. The first gear of brightness can be used in a room of 15-20㎡, and the second gear of brightness can be used in a room of 30-40 ㎡. If you need to use it in a larger room, you can buy multiple I2 lights, with a power bank or charger use.
  • ENERGY-SAVING IR LIGHT: Gear 1 brightness consumption （0.8w）2.2%/h, gear 2 brightness consumption（1.5w） 4.5%/h, While ensuring sufficient light, I2 Ir light will not consume too much power of the VR. At the same time, a type-c power supply port is reserved to plug in t....
Check Stock

New with Shock Absorber & Pneumatic Tyre for Off-Road Hoverboard Accessories Hovercart Go-Karting

  • Double the Fun: By attaching your Ninebot S (sold separately) to the GoKart Drift Kit, you can enjoy a fully-functional GoKart with range up to 13.7....
  • Drift Racing Excitement: Segway GoKart features a handbrake and brake pedal to switch forward and backward. A high steering ratio of 2.1:1 allows for....
  • Options for Everyone: Segway GoKart features three driving modes suitable for different ages. The adjustable frame length and steering wheel height....
  • Portable Design: Collapsible for convenient portability, the Ninebot Gokart Kit fits in the trunk of most cars so you can bring it wherever you want....
  • Warranty: Download the Segway app for a new rider tutorial, assembly instructions, fault reminder speed and more. Please refer to warranty information....
Check Stock

EMSWD Aluminum Alloy Handlebar Extension Knee Bar Accessories for Segway miniPRO/ miniLITE/ 2019 Segway S with Phone Mount Black

  • Easier to Use: User-friendly, handlebar offers great stability and control over your Segway, it's a great addition makes you feel safer and under....
  • Easy operation and High compatibility: Work for Segway miniPRO/ miniLITE/ Segway S..
  • Sheer Driving Pleasure and Decreases fatigue: You have to constantly keeping balance rely on your knees and foot, so you will be tired when you move....
  • Material: Made of aluminum alloy, sturdy and durable, Modem design, beautiful external form, Length Size: Max 41.34 in, Min 30.3 in.
  • Package Includes: 1x Set of Handlebar, 1x Phone holder, 1x set of tools. 1x 128MB USB 2.0 Flash U disk(Install videos- MP4 Format). Not include....
Check Stock

Modern Touch [Explicit]

  • Revolutionary Upgrade of Electric Scooters: With powerful 350W motor, Segway Ninebot MAX can reach to 18. 6 mph, travel up to 40. 4 miles and max load of 220 lbs. Our Smart Battery Management System assures the battery safety and extends the battery life, Input Voltage 100-240V ~ 50/60Hz.
  • Portable Folding Design: One-step folding system for easy portability. Segway Ninebot MAX electric scooter can be folded with ease in mere 3 seconds. Carry it on public transportation, store it in your car and any destination you desire effortlessly..
  • Safe & Comfortable Riding: the mechanical and electrical Anti-Lock braking system ensure braking safety. Front and rear wheel shock absorbers equipped with self-healing 10-inch pneumatic tires provide max comfort, even on rough surfaces or speed bumps..
  • Innovative & Superior Technology: With the LED display, bluetooth capabilities, cruise control, select riding modes and mobile app connectivity for additional security, firmware updates and more. Built-in charger, only use one cord for fast charging..
  • Quality Assurance: Ninebot KickScooter MAX by Segway is designed to be the most sturdy and powerful electric scooter. One-year or 180-day for different parts, please refer to information in product details below..
Check Stock

AIkuass USB Rechargeable LED Light Up Roller Shoes Dual Wheel Skate Sneaker Shoes for Boys Girls Kids 1.5 Little Kid / EU33 Blue

  • Revolutionary Upgrade of Electric Scooters: With powerful 350W motor, Segway Ninebot MAX can reach to 18. 6 mph, travel up to 40 miles and max load of....
  • Portable Folding Design: One-step folding system for easy portability. Segway Ninebot MAX electric scooter can be folded with ease in mere 3 seconds.....
  • Safe & Comfortable Riding: the mechanical and electrical Anti-Lock braking system ensure braking safety. Front and rear wheel shock absorbers equipped....
  • Innovative & Superior Technology: With the LED display, bluetooth capabilities, cruise control, select riding modes and mobile app connectivity for....
  • Quality Assurance: Ninebot KickScooter MAX by Segway is designed to be the most sturdy and powerful electric scooter. One-year or 180-day for....
Check Stock

SparkFun Digital Temperature Sensor - TMP102 (Qwiic)-Compatible with Arduino and other Single-board computers Easy-to-Use I2C sensor Plug-and-Play breakout board Runs from 1.4-3.6V input Use with 3.3V

  • Uses the I2C interface. I2C Address: 0x48 by default (Three additional addresses available, as well). 12-bit, 0.0625°C resolution. Typical temperature accuracy of ±0.5°C.
  • 3.3V sensor. Supports up to four TMP102 sensors on the I2C bus at a time. 2x Qwiic Connectors.
  • The breakout has built-in 4.7kΩ pull-up resistors for I2C communications and runs from 1.4V to 3.6V..
  • I2C communication uses an open drain signaling, so there is no need to use level shifting..
  • The alert pin is an over temperature alert, which has an open-drain and is pulled up through a 10kΩ resistor. The alert can also be read over I2C.
Check Stock

YOFE Electric Go Kart for Kids & Adults, 8MPH Max,W. Capacity 132lbs,24V Licensed Mclaren Battery Powered Ride on Car with 2 Speeds, Drift Racing Go Kart for Kids Ages 6 and Older

  • ...ng your Ninebot S (sold separately) to the GoKart Drift Kit, you can enjoy a fully-functional GoKart with range up to 13.7 miles and speed up to 10mph. Small Racer for Adults, Big Toy for Children. Operating temperature-14°F~ 104°F (-10～40℃).
  • Drift Racing Excitement: Segway GoKart features a handbrake and brake pedal to switch forward and backward. A high steering ratio of 2.1:1 allows for precision steering while the strengthened seat belt ensures the rider's safety. Vehicle size: After extension (Max status): 54×32×24 in (1383×822×600 mm).
  • before extension (Min status): 40×32×18 in (1004×822×459 mm).
  • Options for Everyone: Segway GoKart features three driving modes suitable for different ages. The adjustable frame length and steering wheel height can accommodate riders from 4’3”to 6’5” tall, with max load of 220 lbs and max slope of 15°..
  • Portable Design: Collapsible for convenient portability, the Ninebot Gokart Kit fits in the trunk of most cars so you can bring it wherever you want to ride! Please note: Requires purchase of Segway miniPRO or Ninebot S..
Check Stock

ToLanbbt Scooter Handle Adjustable Handlebar for Segway Ninebot Mini PRO with Phone Mount, Release Knee Pressure Hand Lever Control (Black)

  • 【Material】Made of Aluminum Alloy, sturdy and durable. Modern design, beautiful external form. The length: Max 45 In, Min 33 In..
  • 【Height & Angle Adjustable】Handlebar’s length can be adjustable to fit people at a height 95-190cm, in keeping with ergonomic design..
  • 【Easier to Steering】This handlebar offers great stability and control over your Segway/ Mini PRO, it’s a great addition makes you feel much safe and better control..
  • 【Decrease Fatigue】You have to constantly keeping balance rely on your knees and foot, so you will be tired when you move forward. However, made riding your Segway more fun and relaxed with rely on your hand when you install this handlebar..
  • 【Application】This adjustable handlebar Fits the Segway/Ninebot Mini PRO.If you have any questions or need our help, please send us an email directly at the buyer center or contact our customer support..
Check Stock

SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield Compatible with Arduino R3 Mega2560

  • Sunfounder I2C LCD 2004 displays characters of 4 rows with 20 characters in each..
  • I2C Address: 0x27 or 0x3F.Compatible with Arduino R3/2560 board. http://wiki.sunfounder.cc/index.php?title=I2C_LCD2004.
  • Professonal Support: SunFounder customer service team are always willing to solve any question from our customers .Any problem, please contact us on Amazon..
Check Stock

Segway Nation

  • Sturdy & Powerful: With the powerful dual motors of 400W, the Segway S-Plus can reach a max speed of 12.5 mph, travel up to 22 miles and accommodate a....
  • Safety & Comfortable: Smart Battery Management System assures the battery safety and extends the battery life. Knee control bar allows for precise....
  • Remote Control & Auto-Follow Mode: Use the handle or the joystick on the multi-functional remote with intelligent chip to control the device. When....
  • Intelligent App Management: Download the Segway app for anti-theft function, speed limit and adjustment, vehicle self-diagnose, adjustable ambient....
Check Stock

DORHEA 2Pcs BME280 5V Temperature Humidity Atmospheric Barometric Pressure Sensor Module GY-BME280-5V IIC I2C Breakout Board

  • The BME280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity..
  • BME280 5V uses both I2C and SPI (supports 3-, 4-wire SPI) interface. Interface: I2C (up to 3.4MHz).
  • Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI. for simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI..
  • The BME280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings..
  • The BME280 sensor is precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy..
Check Stock