ReviewsSelective Wave Soldering Machine

HiLetgo 2pcs W1209 with Case 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with 10A One-Channel Relay and Waterproof

  • 100% complete machine patch, wave soldering, stable performance, good consistency..
  • Embedded CPU chip (MCU), more intelligent, lower power consumption..
  • Automatic power set memory (MCU built-in EEPROM memory unit)..
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability..
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C.
Check Stock

Soldering iron pen 510 thread battery 1100Mah cordless solder iron kit tool with silicone cap

  • 510 THREADED INTERFACE:The soldering iron pen is made of stainless steel and has a 510 threaded interface for connecting a copper alloy soldering iron tip and a USB soldering iron charging cable. The soldering iron tips are made of high quality brass and have a power of 5W..
  • 1100Mah battery:The portable solder iron kit pen is powered with 5V 15W 1100mah Grade-A.About 2 hours on a single charge, 40 minutes of continuous work..
  • Adjustable temperature range: The temperature soldering tool has a two-way adjustable voltage knob and the temperature of the soldering iron can be adjusted. Adjustable range from 3.3V to 4.8V..
  • Smart USB Charger:Built-in smart IC power management chip to prevent overheating, over current, over voltage and short circuit problems, and automatically stop charging when fully charged..
  • How to use? 1: Screw on the tip voltage to 4.8 V maximum. 2: Press the power button for 5 times within 2 seconds after the power on. 3: This machine has 10 seconds timeout protection 4:during use,please use the silicone cap if the heating tips is very hot, the button light flashes indicates the battery low. Need to charge..
Check Stock

CREWORKS Soldering Rework Station with Hot Air Heat Gun 750W 2 in 1 SMD Rework Soldering Station Digital Solder Iron Station Welding Tool Kit with Heat Gun Set for Electronics Computer Repairing

  • Two-in-one ----- Attention: The voltage of this product is 110V. Rework station and soldering station combine in one, and you can separately control SMD rework and soldering. This machine will save you space, money and keep your work desk well-organized..
  • More Precise Temperature Control ----- Dual LED screens separately display the temperature of soldering iron and hot air gun. The temperature can be adjusted to be more accurate by using the double control volume button. Note: The hot air gun will immediately heat up when you pick it up. when the soldering pencil is placed on the stand over 10 minutes, the temperature will decrease automatically for safety concerns..
  • Super Quick to Respond ----- With the PID technology for even temperature control, the 750W hot air gun heats up to 480℃ in 5 seconds and the 70W soldering iron heats up to 200℃ in 7 seconds and keeps its temperature, the hot air gun blows at 120L/min for your work efficiency, the built-in fuse protection guarantees 100% safety during operation..
  • Wide Application ----- This product is designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA, and other temperature sensitive components, an essential tool for cell phone repair, laptop repair, or circuit boards soldering. Truly a ....
Check Stock

TXINLEI 8586 110V Solder Station, 2 in 1 Digital Display SMD Hot Air Rework Station and Soldering Iron, 12pcs Different Soldering Tips,Solder Wire,Tweezers,Desoldering Pump,700W 480℃

  • 【Rework & Soldering】 2 in 1 SMD Hot Air Rework Station and Soldering Iron..
  • 【Digital LED Display】 The product adopt microcomputer control,The hot air is digital LED display the temperature..
  • 【Solder Station Features】 High power,quick warming-up,Temperature stabilization and is impervious to air,,and long life and low noise. it have inductance in the hadle,it will be quickly to work when you take the handle,when the handle is return to the shelf,the machine will automatic stopage..
  • 【Widely Used】 Designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA and other temperature sensitive components, essential tool for cell phone repair, laptop repair, or circuit boards soldering..
  • 【20-in-1 Full Kit】 The packing include: 1 * 8586 Solder station, 12 * Solder iron tips, 1 * 6in1 BGA tools, 1 * Desoldering pump, 1 * 100g solder wire, 2 * Tweezers, 1 * Soldering iron heater, 1 * Hot air gun heater, 1 * IC puller..
Check Stock

Hot Air Soldering Station, 2 in 1 750W Digital Rework Station with Hot Air Gun, Temperature Control Welding Station, Airflow Adjustable Desoldering Station

  • The soldering iron station kit is the combination of 60W Soldering Station and 750W Hot Air Rework Station, It supports the independents or simultaneous use of Hot Air Funct and Soldering Function..
  • Digital Soldering Station: 60W Output soldering iron with high-performance analog soldering station produces, Quality, lightweight pencil iron with cushioned foam grip for temp accuracy. 750W output hot air station with PID temperature sensor can quickly sense the real temperature change, and the temperature can be quickly and efficiently returned to achieve precise temperature control..
  • Super Function: This unit is loaded with Auto Cool Down Function,PID (Proportional-Integral-Derivative) Technology Program built into it which is commonly referred to as Magic Temperature Compensation Technology. Use the brushless fan, long life and low noise..
  • Overheat Protection - Various parts of the machine have fail-detecting and auto-shutoff functions, over-heat sensor, short circuit, open circuit, overload failure have automatic protection and will show on display, and the screen display H-E、 S-E to prompt the user..
  • What You Get – If for any reason you are not satisfied with your purchase, please contact us and we will make it right! Our products 100% quality insp....
Check Stock

Cordless Soldering Iron Station for Dewalt 20V Max Battery with LED Digital Display Auto-off / Sleep Mode Welding Tool for DIY, Appliance Repair, Watch Repair and Wire Welding (NO Battery)

  • Two Power Supply Ways: This 72w cordless soldering station works with DeWalt 20V/60V Flex XR Slide Style battery packs (Battery NOT Included). It also works with AC 20V 3A adapter (Adapter NOT Included)).
  • Quick Heating & High Precision: Fast heating up to 300℉ in 3 seconds, this soldering iron station comes with a high-precision temperature stabilization function, saving your waiting time and get your soldering jobs done more efficient and faster.
  • Intelligent Settings: With the internal micro-processor, you can set sleep or auto-off time / temperature as you want. Also, you can adjust the temperature from 140°F-788°F and temp unit according to your needs, so you can apply this solder station in a wider range of applications.
  • User-Friendly Design: The soldering station and the soldering iron holder are made into one unit, more compact and saving your precious working space. With Digital LED display, ON / OFF button, and temp adjustable knob, your soldering works would be easier.
  • Safe To Use: The soldering iron kit is made of high quality ABS and metal-alloy, with heat-resistant silicon wire, built-in low-voltage protection, anti-static design & ESD safe, it’s safe to use. The automatic cooling mode enables the machine cool automatically when on the ....
Check Stock

YIHUA 8786D 2 in 1 Hot Air Rework Station and Soldering Iron Station Max 896°F and Airflow 120L/min MAX Cool/Hot Air Conversion with Digital Temperature Correction and Soldering Function

  • 2 in 1 Dual System -- Combining soldering station and hot air rework station, which has a temperature stabilization function to keep iron and hot air gun at the set temperature steadily. Proprietary Hot Air Technologies and Soldering Performance..
  • Excellent Temperature Control -- Adopt high-end precision PID temperature stabilization powered by dual-core microprocessor, it can monitor and correct the actual temperatures at high speed with fast temperature compensation. Unique in-holder standby function to help cool the hot air gun when it's idle, keeping hot air gun in good condition..
  • Digital Display & Anti-static Performance -- Digital display can show the accurate temperature in real time, which contribute to your soldering work. Special anti-static grounding design, which can prevent static or leakage damage of components and protect your soldering station..
  • Digital Temperature Calibration -- Temperature discrepancies may occur due to the change in the environment's temperature, or the replacement of the heating element and other components. You can correct the discrepancies with this function. The temperature calibration function can improve work efficiency and prolong the lifespan of the soldering iron..
  • Use Reminders -- Please read the importa....
Check Stock

Soldering Station by RHAEGON, 75W Digital LED Display Soldering Kit Adjustable Temp 356℉ - 896℉, ℃/℉, Intelligent Temp Control, ESD Safe Welding Iron Kit with Stand, 5 Spare Tips, Lead-free Solder

  • 【Comprehensive Kit】: This RHAEGON RJ970 soldering kit comes with a sturdy stand.
  • 【Soldering Station with Transformer】: The built-in transformer outputs contact-safe voltage without sacrificing it's powerful performance. It also ensures stable output voltage..
  • 【PID Intelligent Temp Control】: The intelligent system monitors operation temperature in milliseconds and automatically calibrate the temp deviations meantime to achieve stable working temperature..
  • 【Easy To Use】: The soldering station is designed with on/off switch, temperature adjustment knob, ℃/℉ switch, bright LED display and power indicator. The soldering iron is very handy with heat-resistant rubber cover. Accessories can be placed on the stand properly..
  • 【Super fast Heating Element】: The soldering iron adopt high-quality ceramic heater imported from German, which can heat up to the set temperature within 15s.
  • 【Wide Applications】: Perfect for household repairs, school labs, repair workshops and precision electronics. Also very suitable for DIY enthusiast..
  • 【Note】: This model works on 110-120V with its 3-pin US plug. Specially N....
Check Stock

BACOENG 2 in 1 882D Soldering Iron Hot Air Rework Station with LED Display and ℉/℃ Conversion

  • 【2 IN 1 Digital Soldering Iron Station】750W 2 IN 1 Soldering Iron Station is equipped with a soldering iron ( 392°F-896°F) and a heat gun ( 392°F-896°F).It supports the independents or simultaneous use of Hot Air Function and Soldering Function..
  • 【Standby Mode】Putting the open heat gun back into the stand will automatically activate the standby mode. The hot air gun heats to your set temperature in a matter of seconds when you pick up the gun..
  • 【°F Display】The LCD display shows the working temperature in real time, and the temperature can be switched quickly through a simple button. You can choose between Fahrenheit and Celsius to meet different usage habits..
  • 【Overheating protection】The station can monitor and correct the actual temperatures at high speed with fast temperature compensation. Various parts of the machine have fail-detecting and auto-shutoff functions, over-heat sensor, short circuit, open circuit, overload failure have automatic protection..
  • 【Package Includes】1 x Solder Station, 5 x Iron Tips, 4 x Hot Air Nozzles, 1 x Solder Sucker, 1 x Pair of ESD-Safe Tweezers, 1x Tube of Premium Solder, 1 x Tip Cleaner..
Check Stock

Soldering Iron Station Kit, Soldering Station w/ 356℉~896℉ Adjustable Temperature (C/F),Password Locking, LCD Display Digital Soldering Iron Kit, Fast Heating Up

  • ➤【PORTABLE HD LARGE SCREEN DISPLAY STATION】With portable HD large screen,the BK969S soldering iron station kit provide larger and clearer vision and new observation experience..
  • ➤【UPGRADED DRIVING CIRCUIT DESIGN】The upgraded driving circuit design makes it heat up quickly, which greatly improves the welding efficiency.High-temperature resistant silicone wire, Anti-static design & ESD safe, temperature Range:180℃~480°C/356℉~896℉..
  • ➤【°C°F CONVERSION & PASSWORD LOCKING 】C/F Function easily changes the LCD digital readouts from "Centigrade to Fahrenheit" for the Soldering Iron Temperature with setting"-3-".The soldering iron station kit has password locking setting (setting"-4-")and other can't change them without permission.It is a good function for your using..
  • ➤【HEATING CORE SHORT CIRCUIT PROTECTION】It is safe and efficient when you using this soldering station because of heating core short circuit protection.When the heating element and sensor are short circuited abnormally, the machine will auto-alarm and remind you "H-E.
Check Stock

4pcs Temperature Controller Module with Case W1209 12V DC Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with Waterproof NTC Probe

  • 【W1209 Features】The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay.100% complete machine patch, wave soldering, stable performance, good consistency..
  • 【Embedded CPU Chip】The XH-W1209 led display digital thermostat module embedded CPU chip (MCU), is more intelligent, lower power consumption.
  • Automatic power set memory, MCU built-in EEPROM memory unit..
  • 【Temperature Controller Parameter】Temperature range: -50-110°C.
  • Control precision: 0.1 celsius.Input power (DC): 12V.
  • Output: 1 channel relay output, capacity: 10A.
  • 【Waterproof NTC Probe】The NTC probe is waterproof and can control the temperature, allowing to control heating or cooling.(The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin, which can protect the inside to prevent scratches.
  • And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.).
  • 【Package Includes】4pcs W1209 12V DC digital temperature controller board with case.(Ps: The product is not assembled, if you need assembly instructions or if ....
Check Stock