ReviewsSelf Adhesive Phone Holder

6 Pieces Wall Mount Phone Holder with Hooks Self-Adhesive Charging Phone Remote Control Stand Holder Wall Beside Supply Organizer Storage Box Plastic for Home Bedroom Living Room Bathroom Office

  • ✅ Durable quality ABS material: These wall mount phone holder are made of good quality ABS, non-toxic and odorless, eco-friendly,rustproof, wear resistance, not easy to fade or out of shape.Wall mount phone holder can be applied for a long period of time and compatible with most smartphones..
  • ✅ Self-Adhesive: No drilling and tools, no nail needed, install it in a minute. Leave It for 24 hours for better stickiness before use. Attention -- It is not advised to use these wall mount phone stand holder on lime wall, painted wall, drywall rough surface, and wallpaper with textures..
  • ✅ Wide applications: The wall phone storage box can be applied as cell phone holder, charger holder, key holder, USB cable collector and other small item storage, and it also can be applied conveniently next to your bed, or in the living room, bathroom shower, kitchen and dormitory..
Check Stock

MU-CN 12 PCS Replacement Adhesive Stickers for Pop Phone Stand Mount Double Sided Adhesive Pads Circle Sticky Compatible with POP Out Phone Collapsible Grip & Stand/Car Magnetic Phone Mount Holder etc

  • Cell Phone Holder Adhesive: 12 PACK VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
  • Strong 3M Sticky Adhesives: With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of grip mount and press firmly for 5 to 10 minutes for better connecting to the car mount base. please wait 24....
Check Stock

Dashboard Pad Mounting Disk for Suction Cup, 95mm (3.74') 3M Heat Resistant Adhesive Disc for Dash Camera Windshield Holder, GPS, Tablet, Car Phone Bracket Base with Sticky Adhesion Replacement 3 Pack

  • Broad Compatibility: Adhesive mounting disk 95mm fits any suction cup, work with various dashboard surfaces,windshields or windows, to solve the problem of suckers falling off. It provides a 3.74" circular glass-like flat surface for securing dash suction cup phone cradle, windshield cell phone holder, gps navigation ,receiver, car tablet stand, outdoor camera car mount,car decorations, wireless charger , shower wand suction cup holder,phone magnetic mounting system,grab bars,radar detector,ect..
  • 3M VHB Self-Adhesive: These PVC plastic silicone plate with extra strong adhesive gel can hold up to high temperature(120°C). The stickiness of the powerful sticking discs is 40% higher than ordinary two sides sticky glue. The dash mount adapter plate with double-stick tape for car dash is heat proof and waterproof. No matter in hot summer or cold winter, you can use it without worry. Auto ​smartphone mounts glue pad suction pump base is firmly fixed in flat dash, windscreen and more..
  • Easy to Use: The smooth heavy duty dash mounting pad comes with alcohol wipes. Using it to clean the selected dashboard surface before installing, after the surface is fully dry, peel off red adhesive film from the dash suction cup mount plate and attach the vacuum sucti....
Check Stock

8 Pack 3M Sticky Adhesive Replacement Compatible with Socket Mount Base, VOLPORT VHB Sticker Pads for Car Magnetic Phone Holder and 2pcs Double Sided Tape for Collapsible Grip & Stand

  • Cell Phone Holder Adhesive: 8 PACK Small VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
  • Strong 3M Sticky Adhesives: 2 PACK more larger sticky adhesive replacement parts compatible with phone collapsible grip. With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • Alcohol Pads Provided: Clean the chosen area where you’d like to place your phone with alcohol pads. For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad in....
Check Stock

Gecko Travel Tech phone wallet - Stick On Card Holder Wallet for Cell Phones - Adhesive Card Pocket for Credit Cards and Money - Sticker for Cases - Phone Stand - RFID protection sleeve - (Black Logo)

  • ...NE WALLETS completely cover your cards and cash. We even added an extra SECURITY STRAP inside the Lycra, to make triple sure, YOUR VALUABLES INSIDE NEVER FALL OUT and cant be seen by anyone. Dimensions: 3.7 x 2.3 inches (95x58cm).
  • Avoid stick on phone wallets that only use standard 3M Glue. We have added an advanced adhesive called PU Gel to the GECKO Wallets. It can stick to anything, even glass back phones. Most stick on wallets cant stick to glass and say so upfront. We can proudly say we stick to EVERYTHING..
  • PHONE WALLET SETS BY GECKO come with: 1x Gecko Phone Wallet, 1x Phone Stand Holder, 1x RFID Card sleeve, 1x Earphone Untangler, and 1x Microfiber Screen Cleaner. Gecko SHIPS FROM AMERICA & offers customer service responses in under 24hrs, we stand behind our Gecko Phone Wallet Sets for a full 90 days..
  • Unlike other adhesive phone wallets that only offer 2-3 colors, we have worked hard to offer 60+ designs. We know that your phone is seen by so many people through the day. You want to have a design that is unique to who you are, GECKO WALLETS let you show your true colors..
  • PHONE POCKET, credit card holder stick on, phone wallet stick on, cell phone credit card holders, back of phone credit card holder, adhesive phones wallet, phone wallet stick ....
Check Stock

3M Sticky Adhesive Replacement for Magnetic Dashboard Pop Out-Stand Mount Base Circle Double Sided Tape 2 Pack Rectangle VHB Sticker Pads for Dash Magnet Phone Mounts Sockets (Red)

  • ✅Strong 3M Sticky Adhesives: 10 PACK 1.38" more larger sticky adhesive replacement parts compatible with phone collapsible grip. With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • ✅Clean Your Phone:2 PACK 1.08"*1.88" Clean the chosen area where you'd like to place your phone with the stickers. For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • ✅Cell Phone Holder Adhesive: 4 PACK 0.91" Small VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there's a flat and hard surface in the car dashboard.
  • ✅Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surf....
Check Stock

Loncaster Car Phone Holder Cell Phone Holder Silicone Car Pad Mat for Various Dashboards Slip Free Desk Phone Stand Compatible with iPhone Samsung Android Smartphones GPS Devices and More Black

  • Ultra Stable, Never Falls Off: Owing to the strong high-tech adhesive sticky back and the silicone grips that provides more rigid stability. Whenever there is an event on bumpy roads, sharp turns, or emergency braking this car phone mount will not slip around but stay put on your flat dashboard. Absolutely a reliable product on a pleasant self-driving tour!.
  • All Silicone, Nothing to Break: The iphone car mount is all soft silicone so you don't need to worry if it damages your devices. If you've had enough of air vent mount/CD slot mount/windshield suction holder/suction cup holder, you will like its simplicity! No moving parts, springs or anything that can fall apart! This simple but effective phone car holder will be such a great addition to the car!.
  • Low Profile, No Distractions: This actually meets your demand for a dashboard phone holder to provide an option for a 'heads-up' display when needed on long or new trips to unfamiliar places. It's low profile keeps it from encroaching into your view of the road, and the phone mount for car allows you to check the map (such as Google maps, Apple Maps, etc.) without looking down & away from the road. It's an irreplaceable item for Uber, truck and taxi drivers..
  • Easy to Use, One-hand Operation: Take this....
Check Stock

Adhesive Toilet Paper Holder with Shelf Wall Mounted, SUS304 Stainless Steel Toilet Paper Roll Holder, Mega Roll Tissue Roll Paper Dispenser, No Drilling or Wall Mounted with Screws (Polished Chrome)

  • Easy Installation with 3M Adhesive Pad – Not handy tools? Don’t worry. Our toilet paper roll holder comes with 3M adhesive pad. It features no-sweat installation without drilling. Self-adhesive only takes a minute of work. If you prefer drilling hole and install with screws, Ok, our product has screws kit for you..
  • Anti-drop Upward LipStorage Shelf –Worry about your phone falling down from shelf? Don’t worry. The big difference from other TP holder products, our product’s top shelf has anti-drop upward lip on the edge, which can prevent smart phone or other items dropping on the floor. With the large top shelf, you can put you smart phone, your wet wipe, your tissue, or any necessary items for bathroom on it. It is very convenient and practical..
  • It Can Fit Mega / Large Roll - Worry about the mega roll in your home that can not fit in the TP holder? Not for Noonext’s TP holder. Noonext’s toilet paper rolldispenser can hold most of mega roll brands in market, thanks to the specially designed space inside product. We extend the product space, and it can fit both regular roll or mega roll..
Check Stock

Zylee Cell Phone Ring Stand Holder, Transparent Phone Ring Stand 360 Rotation Finger Ring Stand Phone Ring Grip for Almost All Phones

  • ...ing design makes your phone/case look unique and beautiful..
  • Free Rotation Phone Ring HolderThe flexible joint and invisible spindle makes phone ring holder rotate smoothly, 360 rotation & 180 flip, landscape or portrait mode at your disposal, giving you ultimate flexibility to view your phone from any angle..
  • Strong Adhesive Phone RingsThe high-viscosity adhesive makes the phone ring grip attach to your phone/case firmly for secure grip, which prevents your phone from dropping and reduces the risk of theft. The few residues left after detaching can be wiped off by rubbing alcohol easily..
  • Wide CompatibilityOur cell phone ring holder stand is compatible with almost all phones and phone cases, such as iPhone X/8/8 Plus, Samsung Galaxy S9/S9 plus/S8/S8 Plus, Google Nexus, HTC and more..
  • What You Will GetYou will receive 4 packs of transparent phone ring holder(2 Round and 2 Square). Any problem with the phone ring holder, please feel free to contact us. Our phone ring holder stand provides a 45-day money back & lifetime warranty.DescriptionTransparent Design:.
  • Transparent phone ring design makes your phone look unique and beautiful..
  • Nice looking cell phone ring holder for girls and men. Perfect gifts for lover, family member and best friend. Strong Adhe....
Check Stock

TAGVO Phone Ring Holder Finger Ring Kickstand and 3M Sticky Adhesive Replacement Set Including Metal Plates - 360°Rotation Metal Grip Holder for Magnetic Car Mount Compatible with Cell Phone

  • 【Metal Plate with Strong Adhesive】Super thin metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. 1, Advanced surface treatment. 2, Storng adhesive on the back. 3, Scratch-Resistant Protective Films Included, simply stick magnet sticker for phone mount behind films to your case/battery cover, on a rugged case, or directly to your device. Then device will automatically suck as it closes to the car mount..
  • 【3M sticky adhesive replacements compatible with Phone Holder, Metal Plates, Magnetic Car Mount Holder】IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive can’t stick well on phone case, please don’t not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait.
  • 【Easy to use】You need to remove the used 3M tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3M adhesive sticky circles on the back of grip mount or phone case and pres....
Check Stock

Foldable Cell Phone Stand for Desk, Adjustable Cellphone Ring Holder Finger Kickstand for Office Desktop & Magnetic Car Mount, Rotatable Multi-Angle Hand Grip for iPhone 14 and Smartphones Back Case

  • ...rmat when navigation, shooting selfies, zoom calls, watching movies show or making video chat on Facetime. Low profile, adaptable, luxury, ergonomic, multi-scene, unlimited vision, gift idea..
  • REPLACEABLE & DETACHABLE: Double-sided superb gel 3m is high-strength viscosity, heat resistant (120°C+). Best selling self-adhesive universal flexible well made cellular phone holder adhere firmly to phone cover wrap. Provide 2 additional circular adhesive patch strips for replacement, just reapply phone case as your wish. A premium, minimalist, aesthetic, multi-view ring shaped trifold phone mount. Trust it’s sturdiness, anti-tarnish, hinge tension will not loose when unfold turnish, get rust..
  • 3 IN 1 MULTI-TASKING MULTI USE: This novelty extendable verticle 3-fold pedestal holder is positioning versatile, can be a unfading plain slim profile desk phone stand girly, also work with dashboard magnetic vehicle mount. When watching stuff, vlogging, texting, walk, jogor or holding things, hook metal pop-up finger ring grip kickstand tripod on finger to anti drop/ anti theft. It’s mid-size, ultra-thin, easy to fit in pocket / purse/ handbag, also can stand-up hanging on computer as a hanger..
  • GENERIC & TELESCOPING: One-piece extended multifunctional sturdy slick ....
Check Stock