ReviewsSelf Tapping Screws chipboard Screws self

NINDEJIN M3.5 Self Tapping Screws Assortment Kit 304 Stainless Steel Wood Screws Flat Head Phillips Drive Screws Set with 240Pcs Tapping Screw 12-40mm and 2Pcs Cross-Head Batch

  • High Quality: 304 Stainless Steel Flat Head Self Tapping Screw Phillips Cross Metal Hardware Assortment Kit Set with Cross-head Batch.
  • Multiple Choices: 242pcs M3.5 wood screws assortment kit. Includes 12mm/0.47'' 14mm/0.55'' 16mm/0.63'' 20mm/0.79'' 25mm/0.98'' 30mm/1.18'' 35mm/1.38'' 40mm/1.58'' length screws and 2 piece Phillips head batch. Kinds of sizes for your choice..
  • Material: These self-tapping screws are made of 304 stainless steel. Stainless steel with superior rust resistance ensures long-lasting results, corrosion resistance,anti-aging and good toughness.
  • Easy to Store: Each size is individually packed in a small bag and all screws are packed in a clear dividing box. The fully transparent box simplifies the selection and storage of the product and is labeled with the corresponding size chart for ease of use..
  • Wide Application: NINDEJIN Self-Tapping Screws Assortment is mainly used in metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material. Widely used in electrical products, communication equipment, furniture, other maintenance work, DIY arts and craft and much more..
Check Stock

Glarks 120Pcs #8 x 5/8\ Phillips Modified Truss Head Wood Screws, Black Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 5/8" modified truss head wood screws in total. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, black zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock

Glarks 120Pcs #8 x 1-1/2\ Phillips Modified Truss Head Wood Screws, Blue Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 1-1/2" modified truss head wood screws. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, blue zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock

ZXFOOG Stainless Steel License Plate Screws-Rust Proof Car Tag Bolts for Fastening License Plate Cover, Front or Rear License Plate Frames with Screw Black Caps (M6 Screws+Chrome Caps)

  • ...hield/diamond/ skull/American flag/patriots license.The complete set of screws is suitable for license plate installations such as Jeep cherokee,jeep wrangler, Acura, Audi, BMW, Tesla,mustang,Honda,Toyota,Lexus,VW,Nissan,Ford.
  • 【Stainless Steel License Plate Cover Screws】: A set of 8 M6 Self tapping screws are made of 100% stainless steel, will never rust or corrode through decades of years.1/4-14-3/4" screws with 3/8" head license plate fasteners Fit most domestic Cars and trucks,motorcycles. Can install the front and rear mounting bracket/tag to most vehicle. Other popular metal screws will rust and damage your license plate holder and car body.
  • 【Easy To Install】:M6x20mm Standard screws size, will fit most American and Import cars.Great for cars, trucks, motorcycles and RVs. 4 solid Stunning Premium Smooth chrome Finish license plate screw caps are used to hide the screws,can better compatible with your license plate frame and license plate.Our upgraded license plate frame screw caps are more durable than universe plastic caps in the market. They’re the thickest license plate screw caps you can find.
  • 【No Rattle】:Enjoy the silence! Eight oversized shockproof pads to prevent the plate from vibrating with the bump....
Check Stock

Power Pro 48610 Wood Screws, #9 x 2-1/2\

  • 【HIGH QUALITY MATERIAL】:Made of Carbon Steel, resistant to rust,good corrosion resistance in bad environment,commonly have a sharp point that helps penetrate the material..
  • 【MATERIAL & WORKMANSHIP】:Adopting high-precise cutting technology, the screw thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using..
  • 【PACKAGE INCLUDES】:8 Kinds Phillips Flat Head Self-Tapping Screws. Contains M3 x 6mm/8mm/10mm/12mm/16mm/20mm/25mm/30mm wood screws and M6 screw anchors, meet all your demands..
  • 【STORAGE BOX】: There are 420 pcs different types of screws. All of screws will be packed in a sturdy convenient case, can be used for a storage box, is organized to you..
  • 【WIDE APPLICATION】:Self tapping wood screws are mainly used in metal, plastic or board articles,such as gypsum boards, wooden board, ceiling, partitions,etc.Widely used in electrical products,communication equipment, ship assembly,machinery, furniture,other maintenance work,DIY arts and craft..
Check Stock

Aootf Stainless Steel License Plate Screws-8PC M6X20mm Rust Resistant Stainless Steel Screw, Self Tapping License Plate Bolt Fastener for Securing License Plate Frame, Chrome Caps, Anti-Rattle Pad

  • ...late shield/diamond/ skull/American flag/patriots license.The complete set of screws is suitable for license plate installations such as Jeep cherokee,jeep wrangler, Acura, Audi, BMW, Tesla,mustang,Honda,Toyota,Lexus,VW,Nissan,Ford.
  • Stainless Steel License Plate Cover Screws: A set of 8 M6 Self tapping screws are made of 100% stainless steel, will never rust or corrode through decades of years.1/4-14-3/4" screws with 3/8" head license plate fasteners Fit most domestic Cars and trucks,motorcycles. Can install the front and rear mounting bracket/tag to most vehicle. Other popular metal screws will rust and damage your license plate holder and car body.
  • Easy To Install: M6x20mm Standard screws size, will fit most American and Import cars.Great for cars, trucks, motorcycles and RVs. 4 solid Stunning Premium Smooth chrome Finish license plate screw caps are used to hide the screws,can better compatible with your license plate frame and license plate.Our upgraded license plate frame screw caps are more durable than universe plastic caps in the market. They’re the thickest license plate screw caps you can find.
  • No Rattle: Enjoy the silence! Eight oversized shockproof pads to prevent the plate from vibrating with the bumper and cau....
Check Stock

Allkeen Stainless White Painted Hex Head Self-Tapping Gutter Screws #8 x 1/2", 150 Pieces

  • [Premium Material]: Made of 304 stainless steel, These eye screws has superior rustproof, waterproof and anti-corrosion properties. Perfect for indoor and outdoor applications.
  • [Ingenious Color]: The white painted head blends in with surrounding hardware, such as gutter, downspouts, etc, they are much less obvious and low profile.
  • [Self-Tapping:] Self-piercing screws penetrate metal and tap their own mating threads to eliminate the need for pre-drilling.
  • [Multi-Application]: These sheet metal screws, or tapping screws, are highly versatile and are used to attached metal, wood, fiberglass and plastic, can use them especially for rain gutter, downspout, etc.
  • [Satisfaction Guarantee]: You will get a box for good storage, including 150pcs gutter screws and a piece of bit. Please contact us with any questions or issues that you may have.
Check Stock

400Pcs Self Drilling Screws Black Oxided, Hex Washer & Modified Truss Head Self Tapping Screws Assortment, 8 x 1/2\ to 1-1/4\

  • ✔Screw Type: #8 Black Self Drilling Screw Assortment Kit.(#8 for 3mm carbon steel sheet to avoid fracture).
  • ✔Sizes: #8 x 1/2'', #8 x 5/8'', #8 x 3/4'', #8 x 1'', #8 x 1-1/4'' Self Drilling Screws(for each head)..
  • ✔Head Type: Hex Washer and Modified Truss Head.
  • ✔Made of 100% 410 Stainless Steel and with Black Oxide coating, giving the screws an excellent corrosion and abrasion resistance..
  • ✔Self Drilling Screws (sometimes called self-tapping screws) are perfect for use in sheet metal steel, aluminum, wood, plastics, and other similar materials, self-drilling makes pre-drilling unnecessary..
Check Stock

Hilitchi 240 Pcs #8 304 Stainless Steel Phillips Truss Head Self Tapping Sheet Metal Screws Assortment Kit Set

  • ♛ Made of 304 Stainless Steel, stainless steel is superior to regular steel and provides excellent rust resistance in water applications, Suitable for indoor and outdoor use.
  • ♛ Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material..
  • ♛ Package Quantity: 240-Piece. All of screws will be packed in a sturdy plastic box, can be use for a storage box.
Check Stock

410 Stainless Steel #8 x 1/2'' to 1-1/2'' Self Drilling Tek Screw Assortment Kit, Black Oxide, Modified Truss Head, 190PCS Assorted Size Self Tapping Sheet Metal Screws

  • ✔Screw Type: #8 Black Self Drilling Screws Assortment Kit.(#8 for 3mm carbon steel sheet to avoid breaking off. Min Breaking Torque-2.8N.M).
  • ✔Sizes: #8 x 1/2'',#8 x 5/8'',#8 x 3/4'',#8 x 1'',#8 x 1-1/4'',#8 x 1-1/2'' Self Drilling Screws(Each Head)..
  • ✔Made of 100% 410 Stainless Steel and with Black Oxide coating, giving the screws an excellent corrosion and abrasion resistance..
  • ✔Self Drilling Screws (sometimes called self-tapping screws) are perfect for use in sheet metal steel, aluminum, wood, plastics, and other similar materials, self-drilling makes pre-drilling unnecessary..
Check Stock

Whiteboard Installation Hardware Kit, Heavy Duty, Hangs up to an 8 Foot Dry Erase or Chalkboard, for 1/2\ Thick Boards and Above

  • The selected kit fits 1/2" thick whiteboards..
  • The quick and easy way to hang your new whiteboard. Adjustable l-clips and self-tapping screws make make for a forgiving installation process..
  • Includes 10 x 3/4" L-clips, self-tapping screws, Philips head screws and plastic anchors..
  • Fits most whiteboard and chalkboard types, up to 4x8', see product description for more information..
Check Stock