ReviewsSelf calibrating Voltage Testers

Isolation Amplifiers Isolated Modulator (5 pieces)

➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..

Check Stock

Fluke PRV240 Proving Unit

PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment.
Sources both AC and DC steady-state voltage - supplies 240 V DC/AC.
A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool.
Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers.
Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact.

Check Stock

Tinsley 4720-9 Decade High Resistance Box 5000V DC 5kV (4720/4 9 Decade Box 1 KΩ to 1 TΩ)

Designed for checking and calibration of insulation testers..
Measuring Range 1kohm to 1Tohm, Resolution 1kohm..
Best accuracy 0.1% (dependent on range), Maximum 5000V (dependent on range), Maximum dissipation 3.5W (dependent on range).
Please allow 4 - 5 weeks lead time for this new product to arrive. Comes with a one year warranty from the Manufacturer..

Check Stock

Self Laminating Calibration Labels 1 x 2 Inch - Write-on Calibration Stickers with Spiral Bound Cover for for NIST Calibration, ISO-900 Calibrate Equipment 180 Quality Control Labels Per Pack

Included Calibration Labels 180 pcs Production Quality Control Labels per pack, each Industrial Stickers size is 1 x 2 Inch.
These Self Laminating Calibration Stickers have a clear, polyester self-laminating flap, that protects your writing from chemicals, tampering, and abrasion.
Our Calibration Stickers with spiral bound book protects labels from damage or loss.
Production Control Labels, Legend"Calibration - ID No./by/Date/Due".
Write-on Calibrating Sticker Labels are very easy to use, and are perfect for a small company that has to contend with NIST Calibration, ISO-900 Calibrate Equipment occasionally.

Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..

Check Stock

Drone Flight Simulator : Zombie Warfare 3D

【FPV Simulator】Compared with other remote controllers, LiteRadios 2SE has the function of FPV simulator which can acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE..
【Built-in Battery】 The LiteRadio 2 SE continued working time for a fully charged battery is about 8 hours, bringing an excellent endurance performance and enjoy control..
【Joystick Calibration】 Manually calibrate the joystick. The LiteRadio 2 SE joystick data may offset and can calibrate after it has been used for a period of time (if joysticks are hit by physical)..
【System Upgrade】Updates with BETAFPV self-developed LiteRadio System.Player can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter，which is more convenient for the beginner racer to operate..

Check Stock

GlowShift 10 Color Digital Volt Voltmeter Gauge - Reads Battery Voltage 8-18 Volts - Multi-Color LED Display - Tinted Lens - 2-1/16" (52mm)

GlowShift 10 Color Digital Series Volt Gauge is Designed to Monitor & Display the Voltage of Your Car or Truck's Battery.
Battery Voltage Readings from 8 to 18 Volts - 2-1/16" (52mm) Gauge with Digital Display & Tinted Lens.
Quick-Glance & Easy to Read Digital Display - 10 Solid Color Modes & 2 Color Cycle Modes - Self-Calibration at Startup Ensures that the Gauge is Performing Optimally.
Includes 2' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Check Stock

Klein Tools 80092 Electrical Tester Kit and Inspection Kit with Circuit Breaker Finder, Voltage Tester, and Test Leads, 6-Piece

BEST SELLERS in convenient kit include three testers with leads for electrical test and measurement applications.
Digital Multimeter, Non-Contact Voltage Tester with Flashlight, and GFCI Receptacle Tester.
VARIETY OF FEATURES on the Digital Multimeter MM320 measures up to 600V AC/DC voltage, 10A DC current and 2MOhms resistance.
also tests batteries, diodes, and continuity.
DUAL-RANGE TESTING CAPABILITIES allow Voltage Tester NCVT3P to detect from 12 to 1000 VAC or 70 to 1000 VAC for a broad variety of low-voltage or standard voltage applications.
DETECT WIRING CONDITIONS on GFCI Receptacle Tester RT250 which features a large backlit LCD readout of voltage, and clear indication of wiring conditions, with patent pending detection of Open Neutral / Open Ground wiring faults.
CIRCUIT BREAKER FINDER quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected.

Check Stock

Oscilloscope Multimeter 2-in-1, Color Screen Intelligent Graphical Handheld Oscilloscope Multimeter 1MHz Bandwidth, 2.5Msps Sampling Rate, DC/AC Voltage/Current Test

...to 50MHZ, real-time sampling rate 250MSa / s, recording length up to 8k dots. 3. Cursor measurement function. 4.7 kinds of automatic measurement functions. 5. XY function. 6. One key automatic setting function, convenient for detecting and debugging..
Meter mode: 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test. 2. Auto range function, convenient for testing and debugging. 3. The maximum input voltage is AC 750V, DC 1000V. 4. Independent multimeter and oscilloscope input. 5. Reading the wait function. 6. Relative measurement function..
USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. After connecting to the computer, the computer can recognize the oscilloscope as a USB flash drive and read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data..
Save function: can save 4 groups of settings, 4 groups of reference waveforms, 4 images, 4 groups of waveforms in CSV format. The reference waveform can be displayed on the same screen as the measured waveform for convenient comparison of the waveform. Self-calibration function. Up to 6 automatic measurements ca....

Check Stock

Calibration Stickers,Green Black Word Calibration Labels, Self Laminating Protects Your Writing from Smearing ,Tampering and Abrasion,Perfect for NIST, ISO Calibrate Equipment-132 Labels/Pack

Production Control Label, Legend"Calibration - ID No./by/Date/Due". Write on these labels using a pen, pencil or stamp for the best laminating message you can make yourself..
2 x 0.75 Inch 132 Pcs Self Laminating Calibration Labels. Clear laminate seals down over writing..
SELF-LAMINATING. Labels have a clear, polyester self-laminating flap, that protects your writing from chemicals, tampering, and abrasion. Keeps the marker from smearing and the Greese and Dirt Out..
GOOD ADHESIVE. Labels have a permanent clear acrylic adhesive and are designed for general-purpose industrial applications..
CALIBRATION LABELS. Use this label to ensure routine calibration and working accuracy of your equipment..

Check Stock

ALLOSUN-EM3081 Digital Multimeter/DMM/Multi Tester Amp/Ohm/Volt Meter/Diode and Continuity Test Pocket Size

EASY TO TAKE Compact ergonomic design and one-handed operation.Perfect choice for carry-on measuring..
EASY TO WORK Auto ranging accurately measures with Self-calibration chip to make sure the accuracy and stability..
EASY TO READ 6000 Counts digital display with backlight,data hold and stand bracket that provide clear display..
MAJOR PARAMETER Measures DC Voltage to 1000V, AC Voltage to 750V, AC/DC Current to 10A, resistance to 60MΩ, capacitance to 9.9mF, Temperature to 1832℉,continuity, frequency and diode test..
SAFETY AND WARRANTY CAT III 600 V safety rated and double fuse wire for safety.One-year exchange, three-year warranty.Please feel free to contact us with any questions you may have..

Check Stock