ReviewsSelf clinching Nuts For Stainless

E3-8-ST Steel Tubular Rivet, 3/16\ Diameter X 1/4\ Length, Oval Head (.375 Dia. X .060), ZINC Finish (Pack of 100)

Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched..
Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.
Rivets can also be used with a rivet cap to improve appearance of clinched end..
Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward..

Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched..
Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.
Rivets can also be used with a rivet cap to improve appearance of clinched end..
Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward..

...ds:3-Rubber Paddle , 3-Metal Straps , 9-Bolts & Lock Nuts , 3-Self-tapping Screws.
The traditional zinc coated screw, after long time use, will inevitably rust with the nut and become welded together. This makes it impossible to repeat use after unscrewing. Our screws are made of 304 stainless steel, which means it can stand years of harsh environment while being rust-resistant. Because of this, you can expect to use it again and again..
Rubber Paddle 3/8″ thick(2″W x 5″L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75.
Metal Strap with holes – 1 3/8″ W x 3 3/4″L ,Punched flat bar stainless steel materials, 1/16″ thick.
Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2″ wrench & socket).
Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling, Stainless Steel Materials.
The Purpose of the Kit : This kit reduces the existing “gap” between the snow blower’s impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine’s operational efficiency and snow throwing capability will be, and the less l....

Designed for wood gates or vinyl gate applications. Holds gate up to 60-in wide and 35-lbs. Max angle 160 degrees..
Kit includes one standard gate strap hinge, 1 back plate, 9 - 1 1/4" stainless steel Phillips self-driving screws, 3 - 1 1/2" stainless steel lag screws, 3 - 60mm hex bolts, 3 - thin hex nuts, 3 - nylon washers, and 3 - acorn nuts..
Easy installation on posts with 2 1/2" or larger post dimension and gates with 2" or larger rails.
Made out of powder coated aluminum, ASTM B117 Salt-Spray tested and passed.
Unmatched protection for unmatched gate hardware, with the warranty coverage to prove it. Covered by our Limited Lifetime Warranty, you can rest assured that your investment is well protected..

[Performace] - Lightweight for comfort and flexibility | 4-way moisture wicking stretch fabrics.
[Durable] - Padded, quadruple stitched reinforced knee and shin area for increased protection and resilience.
[Comfort] - Hi-Flow, duramesh ventilation | Soft, adjustable elastic waistband with drawcord | Soft self-clinching elastic ankle cuffs.
[Mobility] - 4-Way stretch zones for crouching, running, and diving | Athletic fit (size up for baggy) |.
[Perks You'll Love] - Dual swab pockets | Two zipper pockets | Dry microfiber storage pocket.

...d self-releasing mechanism that guarantees a proper rock-solid cinch. The ergonomic, cushioned, non-slippery handles were designed to ensure strong grips in any condition. These handles have enough leverage to comfortably crimp clamps PEX pipe on any PEX Fittings. This tool is designed to accept ASTM 2098 compliant stainless steel clamps..
[SIMPLE & RELIABLE] Made with tight tolerance and comes pre-calibrated, offering a simple and ready-to-use PEX crimp tool for novice DIYer and professional plumbers. This universal tool does not require any additional adjustment for all Stainless Steel clamp sizes..
[PRECISE RATCHETING MECHANISM] PEX clamps are securely clamped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The ratcheting function allows the PEX tool to achieve desired compression without hesitation..
[ALL-IN-ONE KIT] This package includes all the tools you need in one kit, 1 PEX clinch clamps crimper, 1 PEX pipe cutter, 1 portable storage bag and 48 pcs PEX pipe clamps, which contains 6 pcs 3/8'', 16 pcs 1/2'', 6 pcs 5/8'', 14 pcs 3/4'' and 6 pcs 1'' PEX rings..
[TICONN BRAND QUALITY COMMITMENT] We stand behind the quality of our products. If for any reason you are not satisfied with your purchase,....