ReviewsSelf leveling Chair Glides

Wrought Iron Patio Furniture Legs Caps 1-1/2 56 Packs Floor Protectors Plastic Round Inserts Feet Caps for Outdoor Metal Chair and Table Glides

  • Say goodbye to nasty scratches on your patio floors.These wrought iron chair glides help to protect your floors from permanent damage.
  • Our wrought iron chair glides have a diameter of 1.5” and they are easily installed using a rubber hammer or mallet..
  • Fits most standard sized patio chairs that require a 1.5 inch in diameter cap. Please measure the diameter of the wrought iron cup area where the....
  • Our 56 pack of patio chair glides is enough for 14 chairs (with 4 legs each)..
  • Spend less time replacing your chair glides and enjoy more time relaxing..
Check Stock

Slipstick CB190 ¾ Inch Floor Protector Chair Leg Glides/Furniture Feet Sliders (Set of 16) Self Stick or Screw On - Black

  • Attaches to bottom of chair legs or furniture feet to ease the sliding of furniture and protect flooring.
  • Glides feature super slick sliding surface for smooth and easy gliding on hard floor surfaces or carpet.
  • Ideal for kitchen chairs, dining room chairs, bar stools, and furniture with straight legs 3/4 inch to 1 inch in diameter.
  • Protects hard floor surfaces including tile, laminate, ceramic, carpet and more (not recommended for protecting wood floors).
  • Includes 16 glides and screws for permanent attachment and long lasting protection (also feature self stick adhesive attachment option).
Check Stock

Mastery Mart Office Chair Base Replacement for Desk Chair with Cap, Universal Gas Cylinder and Caster Sockets, 28\(70 cm) Heavy Duty 2200 Lbs/1000 Kg (Matte Black)

  • Standard 7/16" x 7/8" (11mm x 22mm) grip ring mounting stem to attach to most standard chair or stool bases - Not fit for Ikea chairs. Ikea chair needs 10mm Stem, but this is 11mm.
  • Each caster wheels features a grip ring stem, which enables them to be attached to the base of an office chair without the use of any tools.
  • This Stool or office chair bell glides to convert any office or desk chair in stationary. This stool office chair bell glides can convert office chair with casters into a stationary chair without losing the chair height.
  • Heavy duty weight rated 150 lbs. per glide as a set of 5 supports 750 lbs.
  • These glides remain stable across smooth floor surfaces such as wood, tile and laminate while providing more traction than caster wheels do.Provides a safer seat for those who have difficulty getting in.
Check Stock

TOVOT 4 Pack of Adjustable Furniture Leg Leveling Glides/Screw On Adjustable Furniture Table Chairs Levelers with Nut- 1.96\ Dia Base,5/16-37 Thread Size,1.96\ Thread Length for Furniture

  • Adjustable Furniture Glides made of metal and nylon ,with thickened flat bottom base, increase the overall force surface, and increase the load capacity.
  • Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
  • Swivel Furniture Leg Levelers Dimension: Total length: 3.14" (80 mm), screw length: 1.96" (50 mm), thread size: M8 * 1.96"(50 mm)-5/16“-37 thread, base diameter: 1.96" (50 mm).
  • Easy to install:Drill a 5/16" hole , 3.14" deep hole using 5/16" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
  • Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.
Check Stock

TOVOT 4 PCS of Adjustable Furniture Leg Leveling Glides/Screw On Adjustable Furniture Table Chairs Levelers with Nut- 1.57\ Dia Base,5/16-60 Thread Size,3.14\ Thread Length for Furniture

  • Adjustable Furniture Glides made of metal and nylon ,with thickened flat bottom base, increase the overall force surface, and increase the load capacity.
  • Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
  • Swivel Furniture Leg Levelers Dimension:Total length: 4.33" (110 mm), screw length: 3.14" (80 mm), thread size: M8 * 3.14"(80 mm)-5/16“-60 thread, base diameter: 1.57" (40 mm).
  • Easy to install:Drill a 5/16" hole , 3.14" deep hole using 5/16" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
  • Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.
Check Stock

Wrought Iron Patio Furniture Legs Caps, 1-1/2

  • 【SIZE】: Our wrought iron chair glides have a diameter of 1.5” and are designed to fit most pieces of common metal patio furniture. Please check whether your wrought iron chair legs have remnants of old feet stuck in them before installation, if yes you can simply with a screwdriver to remove them, to ensure proper fit. (Please measure the inner diameter of the chair leg caps where the furniture glide will be installed before ordering).
  • If you are not satisfied with the furniture glides or have any issues, you could contact Portagen anytime. And you will get a satisfactory answer and solution within 24 hours..
  • 【 SAY GOODBYE TO NASTY SCRATCHES AND RUST】These outdoor chair leg floor protectors not only prevent your patio floors or deck from scratched or rusted but also help the chairs and tables slide with ease.Our wrought iron furniture glides are made with UV resistant plastic that will provide years of use and endure whatever weather may come.
  • 【TIPS FOR EASY INSTALLATION】:A rubber hammer or mallet is recommended for installation. It is helpful to putting this replacement leg end caps in hot water for about 1 minute or you can heat them with heat gun to soften them, then you will find it’s easier to make the glides inserted wit....
Check Stock

TOVOT 4 Pack of Adjustable Furniture Leg Leveling Glides/Screw On Adjustable Furniture Table Chairs Levelers - 1.53\ Dia Base,5/16-50 Thread Size,2.44\ Thread Length for Furniture

  • Adjustable Furniture Glides made of metal and nylon ,with thickened flat bottom base, increase the overall force surface, and increase the load capacity.
  • Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
  • Dimension:Total length: 3.54" (90 mm), screw length: 2.44" (62 mm), thread size: M8 * 2.44"(62 mm)-5/16“-50 thread, base diameter: 1.53" (39 mm).
  • Easy to install:Drill a 5/16" hole , 2.36" deep hole using 5/16" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
  • Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.
Check Stock

TOVOT 4 Pack of Adjustable Furniture Leg Leveling Glides/Screw On Table Chairs Glide Levelers with Nut- 1.49\ Dia Base,5/16-52 Thread Size,2.75\ Thread Length for Furniture,Tables, Chairs, Cabinets

  • Adjustable Furniture Glides made of metal ,with flat bottom base, increase the overall force surface, and increase the load capacity.
  • Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
  • Dimesion:Total length: 3.14" (80 mm), screw length: 2.75" (70 mm), thread size: M8 * 2.75"(70 mm)-5/16“-52 thread, base diameter: 1.49" (38 mm).
  • Easy to install:Drill a 5/16" hole , 2.75" deep hole using 5/16" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
  • Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.
Check Stock

TOVOT 4 Pack of Adjustable Furniture Leg Leveling Glides/Screw On Table Chairs Glide Levelers with Nut- 2.08\ Dia Base,5/16-50 Thread Size,2.75\ Thread Length for Furniture,Tables, Chairs, Cabinets

  • Adjustable Furniture Glides made of metal,with flat bottom base, increase the overall force surface, and increase the load capacity.
  • Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
  • Dimension:Total length: 3.14" (80 mm), screw length: 2.75" (70 mm), thread size: M8 * 2.75"(70 mm)-5/16“-50 thread, base diameter: 2.08" (53 mm).
  • Easy to install:Drill a 5/16" hole , 2.75" deep hole using 5/16" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
  • Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.
Check Stock

Chair Glides X-PROTECTOR – Furniture Glides 40 pcs – Best Nail on Furniture Sliders – Premium Chair Leg Floor Protectors φ 1” – Slide Effortlessly with Chair Leg Pads That Protects Your Floor!

  • X-PROTECTOR SUITABLE FOR ANY HOME FURNITURE – our Teflon Floor Protectors for furniture legs are perfect for any chair legs and furniture feet larger then ¾”. HAMMER Nail On Carpet Glides EASILY TO YOUR FURNITURE!.
  • CHAIR MOVING AND SCRATCHES YOUR FLOOR? Say NO to SCUFFS and SCRATCHES! Furniture pads X-PROTECTOR – BEST FURNITURE SLIDERS HARDWOOD WITH NAIL!.
  • X-PROTECTOR IS A REGISTERED TRADEMARK! WE GUARANTEE OUR CUSTOMERS 100% SATISFACTION WITH OUR PRODUCT! If You don’t like our Chair Glides – WE WILL REFUND YOUR MONEY. ORDER IT WITHOUT RISK – PRESS THE BUTTON «ADD TO CART» RIGHT NOW!.
  • X-PROTECTOR 40 pcs 1” Plastic Chair Glides are made of PREMIUM EXTRA STRONG PTFE (Teflon) – this guarantee that our CHAIR GLIDES will not Wear Out & give Solid Protection to all smooth or sensitive floors such as parquet, laminate, wood, or tiles.
  • NO MORE SLIDING OFF – High-quality Nails ensures SUPERIOR HOLD on ANY KIND of Wooden Furniture – Pre-drill a hole and just tap the teflon pads for furniture into a furniture leg and Forget about Scratches and Annoying Noise for a LONG TIME!.
Check Stock

TOVOT 4 Pack of Adjustable Furniture Leg Leveling Glides/Screw On Table Chairs Glide Levelers with Nut- 2.36\ Dia Base,3/8-30 Thread Size,1.96\ Thread Length for Furniture,Tables, Chairs, Cabinets

  • Adjustable Furniture Glides made of metal and nylon ,with thickened flat bottom base, increase the overall force surface, and increase the load capacity.
  • Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
  • Dimesion:Total length: 2.95" (75 mm), screw length: 1.96" (50 mm), thread size: 10 * 1.96"(50 mm)-3/8“-30 thread, base diameter: 2.36" (60 mm).
  • Easy to install:Drill a 3/8" hole , 1.96" deep hole using 3/8" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
  • Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.
Check Stock