ReviewsSell Copper Wires

Zonegrace 14AWG 2-Conductor 14/2 Direct Burial Wire for Low Voltage Landscape Lighting, 265ft

...ltipurpose cables are suitable for numerous outdoor lighting end-uses. Some of the examples include path-lights, area-lights, flood-lighting, Spot-lights, down-lights, etc. You can also use them foor underwater lights, in specialized areas, into the ground or inside the wells, decks, steps, hardscapes, etc..
【Bare copper wires with complete purity and durability】If you compare it with CCA wires, which are aluminum wires with copper lining, you will get a stronger signal and excellent conductivity in our 100% pure bare copper wires. These wire are long-lasting and durable because of heavyweight jackets that save them from tears, scrapes, and cuts. The flexibility of jackets ensures quick installation and long life..
【Industrial grade material in direct burial grade】These direct burial grade cables are manufactured, especially for outside purposes, which could be below or above the ground or, for that matter, in a conduit that is appropriate for indoor purposes. As compared to standard speaker wires, these wires in direct burial grade can endure harsh weather conditions with excessive sunlight, high humidity, and dusty conditions..
【ETL Listed wires】Most of the contractors and electricians prefer quality wires that are ETL Listed. Before final....

Check Stock

HiLetgo 120pcs/3x40pcs Breadboard Jumper Wires Prototype Board Dupont Wire Male to Male Male to Female Female to Female 2.54mm to 2.54mm 20CM Wires Assortment Kit for Arduino Raspberry PI DIY

0.127mm, 36 AWG/ single root, 20cm(7.87inch)/axis.
The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced....
Including 40 pin male to female jumper wires,40 pin male to male jumper wires, 40 pin female to female jumper wires..
10 different colors, 120units copper cable in total, for making prototypes with arduino boards, stepper motor 3D printer etc, The combinations provide....
Factory directly, 10 tiny copper wires inside of single jumper wire: high-level copper wire inside, durable for conductive connection..

Check Stock

420PCS Non-Insulated Butt Connectors Kit,haisstronica 24-8 Gauge Non-Insulated Wire Connectors of Tinned Red Copper,Electrical Crimp Terminals

Good Assortment:This kit include 420pcs non-insulated butt connectors for 24-8 gauge.Applied in auto, ship, DIY, etc..
High-Quality Tinned Red Copper:The copper uses tinned copper,which is easier to flatten and grasp the wires,the wires will not slip out of the connector..
Tight And Firm Connection:Solidly made results in super strong connections.Built in separator,keep the incoming wires align..
Safer Connection:Good quality pure copper has excellent conductivity performance,the surface is tin-plated and corrosion-resistant to ensure the connection is safer..
Buyer Confidence:We stand behind the quality of our products. If for any reason you are not satisfied with your purchase,please contact us.We offer a 30-day money-back guarantee,and a 12-month replacement warranty giving customers a 100% Satisfaction Guarantee for risk-free purchases!.

Check Stock

Elecan 12/2 Outdoor Speaker Wire Cable 200 Ft 12 Gauge AWG With Tool Kits-Direct Burial in Wall CL3 CL2 Rated-Pro Series 12AWG 2 Conductors-PVC Jacket& Film& Cotton-For Home Theater&Car Speakers-Black

【High Quality Speaker Wire Cable】: The Elecan Pro series speaker wires and cables use 12 Gauge AWG copper-clad aluminum CCA conductors to build excellent signal transmission. And using Anti-Tear Cotton and PVC Protective Film to make the wire Ultra Durable and Sturdy. High-end looking, durable but flexible PVC sheathing wraps around the speaker wires to provide additional protection to the speaker's surface, thus achieving pro sound quality while maintaining the flexibility..
【UL CL3 Rated for Outdoor and In wall Installation】: The Elecan Pro series speaker wires and cables are ideal for outdoor and in wall installation. It can withstand temperature changes, sunlight, soil, water, snow and other outdoor factors. Buried directly underground or in wall or used in conduits. Don't worry about being crushed or damaged.you can be assured of the highest safety standards as the wire has undergone a number of tests to ensure the highest performance and reliability..
【With Free Multiple Tool Kits & Custom Installation For Perfect Sound Quality】: What you get : 12AWG Speaker Wire 200FT.

Check Stock

Seatek Roto-Flex Roto-Split RF-120A Giant Armored Cable Cutter, 0.75-1.125 in, 7-1/4 in L

...ripper: You can bring this wire stripper machine where all the scrap wires and cables need to be stripped. The tool is lightweight, portable, and can easily fit in a bag or at the back of your truck or car for easy transport and storage. This wire stripping machine won't require a lot of space to strip all the copper wire you have. This drill-powered wire stripping machine is manufactured in North America and uses top-grade materials.
Drill-Powered Wire Stripping: Got a hand drill at home? Pair it with the StripMeister original wire stripping machine and you've got a powerful tool that will go through various types of wires, from 18 gauge wire to 250 MCM, including ROMEX and braided (stranded) wire. This wire stripper is your partner for practical and economical wire recycling..
Versatile Wire Stripper Tool: Our drill-powered wire stripping tool can strip wire scraps of different sizes from #18 wire to 250 MCM and diameters from 0.08″ (2mm) Up To 0.79″ (20.1mm). This wire stripping tool also strips ROMEX and braided (stranded) wires, with ease. Many recyclers of copper wires trust this stripper tool. The Romex slot will save 33% of your time over any other wire insulation stripping tool..
Efficient Scrap Wire Stripping: This powerful wire strip....

Check Stock

3M Scotchlok Moisture Guard Weatherproof, UV-Resistant Connector for 2-3 Wires, 16-14 AWG (solid/stranded), 25 per bag

【Safe and Reliable】Rated Voltage: 250V/4KV.
Rated Current: 32A. Glutoad lever wire connectors selected high quality flame-retardant insulating material, no corrosion, anti-aging, resistance high temperature, against electrical shock and long service life. Internal shrapnel copper material, and better conductive properties..
【Time and Effort Saving】Glutoad lever electrical connectors can quickly connect and disconnect wires. If you want to replace wires, only need to pull up the orange levers, pull out the unneeded wires and replace them. There is a test hole in every Glutoad electrical wire connector surface, it can be used to check whether the wires have electricity or not..
【Space Saving】Glutoad lever terminal connectors are compact, simple, reliable and reusable. When you combine the wires, you don't need to worry about twisting between the wires..
【Easy to Use】First, strip the wire according to 0.35-0.47inch, then push the orange lever up to 90° and push in the wires, last push the lever down. When the wire is inserted into the Glutoad wire splice connector and locked, the wires will not come loose..
【Widely Used】Glutoad wiring connectors kit can meet your different demands because they have 3 different conductors (2 3 5 Port). T....

Check Stock

INTBUYING Cable Wire Stripping Machine, Electric Automatic Wire Stripper Machine, Waste Aluminum Scrap Copper Cable Strip Peeler, 11Channels 10 Blades for Dia 0.06-1.5in Scrap Cable Recycling

110V 370W automatic electric wire stripper machine SMS-38, whole size is 24.8x11.81x15.16 inch. It is easy to operate and convenient to carry, it can process single core copper wire, twin cores copper wire..
Wire stripping range is Dia 1.5- 38mm (0.06-1.5inch) and make sure the cables diameter are similar with the feeding holes, large wires in large feeding holes, small wires in small feeding holes, flat wires in flat feeding holes..
Equipped with 11Channels 10 blades for easy access to any cable or wire from the smallest to the largest. Comparing the cables/wires’ diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time..
If the cables wires are blocked in the axises, please check: If the springs on the press wheels are too tight, loose them.
There are too much oil on the cables/wires, please wipe it..
Automatic wire strippers lead to fast stripping speed, fixed machine position, safe and reliable use.Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades..

Check Stock

RGB LED Light Strip Connectors 20 Waterproof LED Adapter Connectors Transparent Solderless LED Light Strip Connectors for Strip Light Unwired Gapless Track Lighting Connector 5V 12V 24V (4 Pin, 10 mm)

Tip: not applicable to 8 mm/ 0.31 inches LED strips.
Please use a standard 22 AWG wire for connection.
There are some unqualified wires on the market that may result in unsuccessful connection.
When the connection is unsuccessful, please observe whether the clip connection contacts are in contact with the copper core of the wire.
Simple Operation: insert the LED light bar light wire into the guide slot, check whether the positive and negative poles are correct, then press the cover down, and align the surface pad of the light bar with the pin on the track lighting connector.
Operating Principle: the metal pin on the solderless gapless LED adapter connectors pierces the copper contact on the light strip, even slight swings and pulls can ensure a firm connection.
Unqualified wires may include: there are too few copper cores to connect accurately.
The copper core is off center and cannot conduct current.
If the wire is qualified but the connection is still unsuccessful, you can re cut a piece of wire and try to connect.
The Reason for Choosing Our Connector: made of quality PC material, our LED connector is sturdy, safe, and not easy to break, lightweight and simple to carry.
Rich Quantity: you will get 20 pieces LED connectors for strip lights, l....

Check Stock

PAXCOO 6 Pack Jewelry Beading Wire for Jewelry Making Supplies and Craft (24 Gauge)

WHAT YOU GET? – Paxcoo jewelry wire set includes 6 rolls of different color copper wire. They are easy to use and works with different types of beads, necklace and bracelet designs.
WRAPPING WIRES – All these jewelry metal wires are approx. 0.5mm (24 gauge) in diameter and 11 yards (10 m) per roll. High quality and perfect for beading, necklace, bracelet, earring and jewelry craft projects.
ASSORTED COLORS – These beading wires are in 5 different colors: golden, silver, copper, coffee and black. More choice of colors to meet your different needs.
A MUST HAVE JEWELRY SUPPLIERS – The art craft wires set can be used for jewelry projects like anklets, bracelets, necklaces, wire wrapped pendants, beaded chains, jump rings, ear wires, etc. They also suitable for floral arranging, framing and hair crafts.
NOTE – If you have any problem for our product, you can click “seller contact” button in your Amazon account to contact us. We will be delighted to help you and reply as soon as we can.

Check Stock

Jonard Tools WSC-826 Adjustable Wire Stripper & Crimper, 8 - 26 Awg

✅ 【Multi-Function Wire Stripper】Come with self-adjusting jaws ideal for copper and aluminum cables, Thumbwheel micro adjusting swivel knob to strip wire smaller than 24 AWG Multifunction, made of steel by special hardened and using life-time.
✅ 【Cable Crimping/Cutting】For stripping wire from AWG10-24, Alloy steel jaws cut for copper and aluminum cables from 10AWG to 24AWG, The cutter is made by special heat treatment and precision coating high-quality blade performs efficient cutting, For insulated terminals 22-10AWG, For non-insulated terminals 12-10AWG, 16-14AWG, 22-18AWG.
✅ 【Self-Adjusting Stripping Pliers】 ( COPPER ADJUSTMENT BUTTON: the copper swivel knob micro-adjusts jaw tension and clearance for perfect stripping on smaller gauge wires beyond 20 AWG, A swivel knob can be adjusted with smaller wires when more tension is required) For auto ignition terminals 7-8mm, For striping the plastic or rubber insulation of the single, multiple cables and wires of 0.5-6mm, For cutting and stripping wire and cable.
✅【Non-Slip Comfort Grip】Touch grips provide maximum comfort and reduced hand fatigue, Plastic & cushion grip handle, provides maximum leverage (PP& TPR) and increased comfort making the grip Self Adjusting.

Check Stock

14 Gauge Speaker Wire (50 Feet / 15.24 Meters) with Banana Plugs (6 Pairs, 12 Pieces) GearIT Pro Series 14 AWG Speaker Cable - Black

PREMINUM SPEAKER WIRE - GearIT Speaker Cable copper wires come in stranded twisted pair wire designs, long or short wire lengths, and thin or thick copper wires. Bundled with 24K gold plated banana plugs..
COPPER CLAD ALUMINUM (CCA) - Solid bulk speaker wires made of cca are lower priced than pure bare copper wire for the same conductivity with an aluminum core. GearIT CCA Speaker Cables provide the same conductivity with slightly higher resistance..
12 BANANA PLUGS - (6 pairs, 12 pieces) banana plug connectors made of non-magnetic aluminum shell and magnetic gold-plated brass pins.
SOUND WIRE WITH POLARITY - GearIT Speaker Wire audio sound cables come with colored pvc jacket for easy polarity identification. Typically, red speaker wire is positive and black speaker wire is negative.
PRO SERIES LIFETIME GUARANTEED - We stands for the highest quality product and customer satisfaction. If you are not happy with the product in anyway we offer an easy return policy. All product come with our top rated lifetime warranty service..

Check Stock