ReviewsSensor Assemblies

12V 1.1 AMP Battery Charger Fully Automatic Lead-Acid Maintainer – for Cars Motorcycles ATVs UTVs Jet Skis and More – ChargeDNA 1.1 – Designed in The USA

  • Auto-Temp Compensation Sensor (Installed).
  • Includes: RTA-2415 2' Ring Terminal Assembly and 15A replaceable fuse,EZC-01 EZ Connector And Mounting Screws, Instruction Manual.
  • Guaranteed to never over/charge - Maximizes battery life and performance.
  • User can select battery type for ALL lead-acid based batteries.
  • Maintains up to six (6) batteries at a time (requires BatteryMINDer "Y" connector assemblies model 210AY).
Check Stock

Detroit Axle - 4x4 SRW Front Wheel Hub and Bearings + Ball Joints Outer Tie Rods Kit Replacement for 2005-2010 Ford F-250 F-350 SD - 11pc Set

  • Replacement for 4WD Single Rear Wheel Models w/ ABS (Excludes Extended Axle).
  • Replacement for 2005-2010 Ford F-250 / F-350 Super Duty.
  • Kit Includes: 2x Front Wheel Hub and Bearing Assemblies + 4x Front Ball Joints + 3x Front Outer Tie Rod End Links + 1x Tie Rod Adjusting Sleeve + 1x Front Tie Rod Drag Link.
  • Hub Specifications: Position: Front | Lugs: 8 Bolt| ABS Type: Sensor Wire| Flange Type: 4-Bolt Square.
Check Stock

(5 Pack) Standard Threaded Brass Bowls - Lighting Fixture Spare Parts - Standard Decorative Bowls

  • For use with Standard Size Deacon Smith Lighting Fixture Assemblies and Spare Partsi.
  • Standard 1/8 IP Threads for use on most lighting fixtures and some assemblies.
  • Brass Spare Parts for Deacon Smith Assemblies.
  • Compatible with Deacon Smith Standard Conduit Downstems and Standard Decorative Parts.
Check Stock

J-B Weld 32929 Ultimate Black RTV Silicone Gasket Maker and Sealant - 9.5 oz.

  • HI TEMP SILICONE GASKET MAKER & SEALANT: Is an RTV Silicone gasketing material, designed for use in mechanical assemblies where continuous temperatures up to 550º F or 650º F intermittent exist.
  • WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project.
  • EASY TO USE: Curing when the product is exposed to the moisture in air, it forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering and is sensor safe.
  • VERSATILE & DEPENDABLE: Ideal for automotive, metal, oil pans, exhaust manifolds, water pumps, timing covers, differential covers, drive housings and oven doors.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond.
Check Stock

J-B Weld 31914 Red High Temperature RTV Silicone Gasket Maker and Sealant - 10.3 oz.

  • HI TEMP SILICONE GASKET MAKER & SEALANT: Is an RTV Silicone gasketing material, designed for use in mechanical assemblies where continuous temperatures up to 550º F or 650º F intermittent exist.
  • WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project.
  • EASY TO USE: Curing when the product is exposed to the moisture in air, it forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering and is sensor safe.
  • VERSATILE & DEPENDABLE: Ideal for automotive, metal, oil pans, exhaust manifolds, water pumps, timing covers, differential covers, drive housings and oven doors.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond..
Check Stock

Aumzong 926-876 Aluminum Engine Oil Cooler and Oil Filter Housing Adapter Assembly,Compatible with 2011-2017 Chrysler 200 300,Charger Cherokee Wrangler Ram ProMaster 3.6L,Replace 68105583AF

  • Package includes: Oil Temperature Sensor, Oil Pressure Sensor, Oil Cooler, Oil Filter, O-Ring, Intake Manifold Seal. Trust Amazon to deliver goods fast..
  • 1 Year Warranty: Oil Filter Housing Adapter Assemblies are made of High Quality Aluminum Alloy and Factory is 100% Inspected to meet or exceed the standards of original OE parts to ensure Product Reliability and Durability..
Check Stock

LMR-400/LMR400 Times Microwave Low Loss Coaxial Cable - PL259 UHF Male to UHF Male Connectors 50 Feet-CB Ham Radio Antenna - Made in The USA by Cable Assemblies Now

  • All Cable Assemblies Now Inc cable assemblies are MADE IN THE USA - we pride ourselves in making sure we provide all of our customers with the best quality product made with the highest quality materials.
  • WARRANTY on ALL Cable Assemblies made and mfg by Cable Assemblies Now Inc. have a limited 10 year warranty - Please do not hesitate to contact us for any questions or concerns.
  • We can guarantee that any cable under 1000MHz will have a Standing wave ratio plot of 1.25:1 at any frequency under 1000 MHz - We can also test return loss, insertion loss, phase angle, and use a Vector Network Analyzer to measure for both match and resonance..
Check Stock

J-B Weld 32507 Water Pump and Thermostat Housing RTV Silicone Gasket Maker and Sealant - .5 oz, Grey

  • WATER PUMP & THERMOSTAT HOUSING GASKET MAKER AND SEALANT: Is a specially designed RTV (Room Temperature Vulcanized) Silicone gasketing material for use in mechanical assemblies.
  • WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project.
  • EASY TO USE: Curing occurs with exposure to moisture in the air, forming a tough, waterproof, petroleum and weather resistant gasket and seal on most surfaces. This product is grey in color and sensor safe.
  • DEPENDABLE & VERSATILE: Perfect for use on automotive applications such as oil pans, valve covers, transmission pans, timing gear covers, and water pumps & thermostats.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond.
Check Stock

J-B Weld 31314 High Temperature RTV Silicone Gasket Maker and Sealant - Red - 3 oz.

  • THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel..
  • EASY TO USE: Curing when the product is exposed to the moisture in air, it forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering and is sensor safe..
  • HI TEMP RED SILICONE GASKET MAKER & SEALANT: Is an RTV (Room Temperature Vulcanized) Silicone gasketing material, designed for use in mechanical assemblies where the existence of higher, continuous temperatures up to 550º F or 650º F intermittent might exist..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World’s Strongest Bond..
  • VERSATILE & DEPENDABLE: Ideal for automotive, metal, oil pans, exhaust manifolds, water pumps, timing covers, differential covers, drive housings and oven doors..
Check Stock

iJDMTOY (2 Universal Sealed Rubber Housing Caps Compatible With Headlight Install Xenon Headlight Kit, LED Headlights Bulbs, Aftermarket Headlamp Retrofit, etc

  • This listing is for (2) universal sealed rubber housing caps.
  • Good for xenon LED conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
Check Stock

OTC 5285 1,650 lb. Capacity Air/Hydraulic Power Train Lift

  • OTC's 1,650 lb. capacity Powertrain Lift is perfect for handling engine and transmission assemblies, gas tanks, drive axle assemblies, engine/transaxle assemblies, electric vehicle batteries, and more.
  • Scissors-type design allows access to all 4 sides of a component for supreme accessability.
  • Two independent adjusting screws tilt the table 15 degrees side-to-side, or fore and aft and can be operated manually or with a non-impact air wrench.
  • Air/hydraulic operation via a foot control pump that features a flexible hose allowing movement around lift.
  • Features a 20 x 32 inch table, 8-inch high capacity swivel casters, a minimum height of 31-1/2 inches with a 74-1/2 inch maximum height, and a footprint that is 33 inches wide x 48 inches long.
Check Stock