ReviewsSensor Board

4389102 Refrigerator Ice Maker Sensor Control Board Kit for Whirlpool Kenmore Kitchen Aid Maytag Jenn Air Replace # W10757851 AP5956767 W10193666 ADC9102 2198586 PS557945 AP3137510

  • ✅【Ideal Replacement】: Want a new Ice Maker Emitter Sensor Control Board that matches the original, for far less than going back to the dealership? This refrigerator control board was specifically designed to look and function the same as the original Emitter Sensor Control Board on your Whirlpool Ice Maker. While this is NOT a genuine Whirlpool part, it is a direct replacement and it will appear, fit and work like the factory part..
  • ✅【REPLACEMENT ICE MAKER OPTIC BOARD】 – The ice maker is controlled by this ‘Optics Board Kit’ that scans the level of ice in the ice container. When the ice level in the container blocks the led beam (Full of Ice) it (shuts off the ice maker). When the ice level in the container is below the led beam (Low Ice) it (turns on the ice maker). If the ice level control board fails, the ice maker will stop making ice..
  • ✅【Compatible】: Refrigerator ice maker ice level optics control board kit.  Includes emitter and receiver control boards.Designed to fit specific Whirlpool manufactured refrigerator models including Jenn Air Kenmore Kitchen Aid Maytag. You can send us refrigerator models number, we can help you to confirm if it can work or not..
  • ✅【Replaces Part Numbers】: ADC9102 AP313....
Check Stock

Arducam Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable to Extend IMX219 Sensor for Smaller Enclosure, Narrow Space Project, Work with V2 Camera on Jetson Nano

  • Fresh Design: A fresh Arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our cable in between. It does NOT support 5MP V1 cameras or any other sensors..
  • Fresh Look: Give your Raspberry Pi Camera Module V2 a fresh look by freeing the sensor from the camera board without losing the traditional flex ribbon cable extension.
  • Fresh View: Having got rid of the restrictions caused by the camera board, you can now see in a new perspective and put the camera in a smaller enclosure and narrow space, like through a small hole or a tube.
  • Fresh Option: The extension cable is compatible with Arducam IMX219 Sensor drop-in replacement modules including IMX219 autofocus and IMX219 M12 lens series. Those combinations will also work with the NVIDIA Jetson Nano.
  • Note: Please detach and re-attach the connectors gently and carefully, otherwise you might cause damage to the connection. The Raspberry Pi Camera Module V2 is NOT included..
Check Stock

Gikfun 20A Range Current Sensor ACS712 Module for Arduino (Pack of 2pcs) EK1181x2

  • pin 5V power supply, on-board power indicator.
  • Package content: 2 x 20A range Current Sensor.
Check Stock

KEYESTUDIO Pico IO Prototype Expansion Board for Raspberry Pi Sheild DIY Kit

  • The Keyestudio Pico IO prototype expansion board works with the Raspberry pico board..
  • It can expand IO ports of the pico board..
  • There are two IIC ports, a serial communication interface , three analog ports and six digital ports..
  • This sensor board simplifies the circuit and makes it easy to connect with commonly used sensors. You can stack a Raspberry Pi pico board onto this shield..
  • KEYESTUDIO Technical Support - If there are any problems during use, please feel free to contact us and we will respond quickly to technical support..
Check Stock

Replacement RTD Temperature Sensor Probe Compatible with Louisiana Pellet Grill& Country Smoker Grills Replace Part 50151

  • COMPATIBILITY - Temperature sensor replacement for Louisiana Grill Series& Country Smoker Series (TIP: Please check spade connector style).
  • REPLACE OEM PART - Smoker tempe sensor replace original accessories 50151, comes with 1pc screw and nut..
  • GRILL THERMAL SENSOR SIZE - 2" Internal Grill Sensor, 36" stainless steel wire allows use with the control board..
  • USEFUL TIPS - To avoid temp probe damaged, do not place probe in water, wires rolled up in a large, loose coil during storage..
  • FRIENDLY SERVICE - If you have any questions, please contact us through Amazon Messenger..
Check Stock

waveshare for Raspberry Pi Pico Evaluation Kit B Include Pi Pico Board with Pre-Soldered Header,1.14inch RGB Color LCD, 10DOF IMU Sensor Module,Dual GPIO Expander,Breadboard

  • Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
  • Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
  • 1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
  • 10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
  • Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.
Check Stock

KEYESTUDIO 37 Sensors in 1 Box Starter Kit for BBC Micro bit with Tutorial (Without Microbit Board), Compatible with V1.5, V2 Microbit Sensor Kit Accessories Programming Gift for Kids Adults

  • Specially designed for Microbit board. This kit includes a keyestudio sensor shield fully compatible with micro bit and other commonly used 37 kinds of sensor modules. It's compatible with both microbit v1.5 and v2, microbit board not include!.
  • Designed to learn electronics programming. Great hands on STEM kit to get started with the micro bit. The product needs to be debugged before use, such as an LED display module. Please use an external power supply and debug the backlight brightness..
  • The kit gives 37 kinds of common sensors, such as Digital LED Module, Analog Temperature Sensor, Photocell Sensor, Ultrasonic Module etc, allow you make a lot of interesting projects like Traffic Light, Magnetic Check, Temperature Test, Joystick Test, Photo-interrupter Test, Alcohol Detection and so on..
  • We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects...... Step by step to explain how to use on our wiki page..
  • Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..
Check Stock

DC Car Adapter Charger for Cobra 360 Laser 6/10/14 Band Radar Detector Power Cord Cable 6 Feet with LED Indicator

  • ◑RADAR MOTION SENSOR LIGHT BULBS: With stronger penetration, They are more sensitive than infrared PIR sensor bulbs. The auto-fill montion sensor....
  • ◑FAR-DISTANCE & STRONG DETECT--- Motion activated bulb detects motion up to 13-26ft in 360°angle, can even penetrate glass, thin board and wall.....
  • ◑ENERGY SAVING & LONG LIFESPAN --- Motion light bulb also with dusk to dawn sensor, The light bulb won’t light when the surrounding environment is....
  • ◑100% SATISFIED GARANTEE -- 12-MONTH WARRANTY & 30-DAY MONEY-BACK GUARANTEE, ensure your 100% worry-free shopping experience with this motion sensor....
  • ◑WIDE APPLICATIONS --- Motion sensing bulb is 5W (50W equivalent) with 450 lumen, can be installed in both indoors and outdoors, such as hallway,....
Check Stock

KEYESTUDIO Max Control Board for Arduino Uno with Three LEDs, Two 6812Rgb LEDs, Two Button Switches, a Buzzer, a Microphone Sensor, a Light Sensor, and an 8 * 16 Dot Matrix

  • KEYESTUDIO UNO MAX kit contains a Max development board, acrylic boards, screws, copper bushes and a Type C USB cable..
  • The Max Control Board is an Arduino uno-compatible board, which isbased on ATmega328P MCU, and with a cp2102 Chip as a UART-to-USB converter..
  • It integrates three LEDs, two 6812RGB LEDs, two button switches, a buzzer, a microphone sensor, a light sensor, and an 8*16 dot matrix..
  • The kit also provides you detailed tutorial and 21 fun experiments so you can learn how the electric modules work and use it to build fun works..
  • How to get the English manual? Search for keywords in Google Browsers "Keyestudio KS0085" you can preview its Wiki online tutorial..
Check Stock

TSL1401CL Linear Sensor 128X1 Linear CCD Camera Sensor Ultra Wide Angle Lens 120 Degree Black and White Line Tracking Module

  • BASIC SPECIFICATIONS: With sensitivity pure tones , field cut and signal output, circuit board output switch (can be directly passed through the microcontroller).
  • MULTIPLE OUTPUTS: The linear magnetic sensor switches has signal output indication, single signal output, active low signal output.
  • IDEAL CHOICE: This linear magnetic sensor switches is ideal for temperature control, proximity switches, alarm detection or rotate encoders.
  • WITH SENSITIVITY: Universal sensor module with potentiometer to adjust the sensitivity of the sensor, provides analog and digital output.
  • HIGH COMPATIBILITY: With A3141 chipset, 49E linear effect sensor, LM393 dual differential comparator, potentiometer, 2 LED and 6 resistors, fully compatible with standard microcontrollers.
Check Stock

[2023 Latest Version] New for 13,13 pro,13 max,iCopy Plus 2.2 Programmer for LCD Screen Display Touch EPROM Vibrator Chip Data Recovery Tool Battery Repair Board for iPhone 13/12/11/XS/MAX/8/7 Plus

  • Reaing chips'data(true tone display,vibrator,light sensor,touch sensor,logic board,base band),and re-write into new LCD..
  • Repair true tone function for iPhone 8 above..
  • Support non-original screen.Independent R&D software to write-in & save data.
  • Available to test & modify Data Cable/Headsets' data, restore Data Cable/Headsets'ordinary function. (Data Cables/Headset Connector Board required).
  • Available to test & modify battery data, clear battery life cycle and modify battery efficient(Battery Connector Board required).
  • Notice: This product has no built-in battery and needs to be connected to a computer through a USB cable..
Check Stock