ReviewsSerial Ethernet Converter Module

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 11 10 8 7 Linux 6ft Black

  • 6 ft FT232 USB to TTL serial adapter 3.3V (with 6 pin 0.1” pitch female socket header) connects devices with 3.3 V logic level UART signals....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable 3V3 (6 way outputs) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND (power line provides 5V and data....
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header USB TTL UART converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, MacOS, Linux 2.4 and greater.
Check Stock

Intel Server System SR1530HCLSRNA

  • 1u Rm Sr1530hcls Dp 3x Hs Sas 45nm 400wType Server Form Factor Rack-mountable - 1U Approximate Dimensions (WxDxH) 16.9 in x 20 in x 1.7 in Localization North America.
  • Server Scalability 2-way Processor No CPU RAM 0 MB (installed) / 12 GB (max) - DDR II SDRAM - ECC Storage Controller Serial Attached SCSI ( Serial Attached SCSI ).
  • IDE Server Storage Bays Hot-swap 3.5" Hard Drive None..
  • Monitor None. Graphics Controller ATI ES1000 - 16 MB Networking Network adapter - Ethernet, Fast Ethernet, Gigabit Ethernet - Ethernet Ports : 2 x Gigabit Ethernet.
Check Stock

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable TX RX Signal 3 Pin 0.1 inch Pitch Female Socket FT232RL Chip Windows 11 10 8 7 Linux MAC OS 6ft Black

  • 6 ft USB to TTL serial adapter (with 3 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (3 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and 3.3V UART signals can be individually inverted by configuring the EEPROM.
  • 3V3 TTL to USB converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock

12V to 5V Direct Current Converter Buck Module USB Output Power Adapter Direct Current Power Adapter Converter Regulator Car Power Converter (3)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

12v to 5v Converter Buck Module USB Output Power Adapter Dc Power Adapter Converter Direct Current to Direct Current Regulator Car Power Converter (1)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

DTECH USB to TTL Serial 3.3V Adapter Cable TX RX Signal 4 Pin 0.1 inch Pitch Female Socket PL2303 Prolific Chip Windows 10 8 7 XP Vista (6ft, Black)

  • 6 ft USB to TTL serial adapter (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port.
  • A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet USB to TTL serial cable 3V3 (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND.
  • PL2303 Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 4 pin 3.3V USB to TTL converter cord Compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE.
  • ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc..
Check Stock

BUD Industries BB-32623 Plate Mounted Breadboard-6 Terminal Strip 11\ L x 8.8\ W x 0.3\ H, Gray

  • The GCAN-205 is a CAN-Bus and RS485/Ethernet converter. GCAN-205 converter integrated Modbus RTU/TCP protocol. This module can convert the data between CAN-Bus and Modbus. With this converter, equipment that used Modbus protocol can connect to CAN-Bus without changing the hardware structure, this makes multi-Bus interconnection very flexible, and extends the application scope of CAN-Bus..
  • CAN Features ? Integrated 1 CAN-Bus interface with terminal ? CAN-Bus signals : CAN_H, CAN_L, CAN_GND ? CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS11898 standards ? CAN-Bus baud rates range from 5Kbps to 1Mbps ? CAN-Bus isolation converter insulation voltage: DC 1500V.
  • Modbus Features ? Modbus slave support function code: 03H, 04H, 06H, 16H ? Support Modbus RTU or TCP ? Support heartbeat and timeout interrupt function ? The working port is fixed, the node address can be set.
  • Hardware Features ? High-speed 32-bit processor ? Embedded hardware watchdog timer ? Power supply voltage: DC 24V ? Maximum current: 40mA ? Electrostatic discharge immunity level: contact discharge ± 2KV, air discharge ±15KV ? Surge immunity level: ± 1KV ? Operating temperature range: -40 ? ~ +85 ? ? Operating humidity range: 5% to 95% RH ? Electrical fast transient bur....
Check Stock

Dell PowerEdge M1000e H330H Blank Insert Module

  • Resilient HA stacking with up to 6 switches (only SFP+ ports can be used for stack connections).
  • Up to 24 auto-sensing 1/10Gb Ethernet switching ports available.
  • 16 internal server 10Gb (KR) Ethernet ports with auto-negotiation capability to 1Gb Ethernet.
  • 4 external integrated 1/10Gb SFP+ Ethernet ports.
  • Flexible media choices for up to 4 additional 1/10Gb uplink ports with one optional FlexIO Module: 4-port SFP+ 10GbE module 3-port CX-4 10GbE copper module (supports 10Gb connections only) 2-port 10GBASE-T 10GbE copper module (supports 1/10Gb connections).
Check Stock

StarTech.com 10/100 Mbps Ethernet to Fiber Optic Media Converter - ST Multimode - 1310nm - 2km - Full/Half Duplex MCM110ST2 Black

  • ETHERNET OVER FIBER EXTENSION: Use this Ethernet to fiber optic media converter to convert and extend a 10/100 Mbps Ethernet (RJ45) connection up to....
  • ADVANCED FEATURES: For added convenience, this Multimode fiber media converter features Link Fault Passthrough (LFP), auto-switching MDI and MDI-X....
  • PLUG AND PLAY: Designed for ease of use, this Ethernet to optical fiber media converter provides a quick and easy setup, enabling even novice users to....
  • COMPACT ENCLOSURE: Designed to be compact, this versatile media converter features a lightweight plastic casing. It can extend extreme distances,....
Check Stock

Mobi Lock - USB Ethernet (LAN) Network Adapter Compatible for MacBook Air, MacBook Pro, iMac, Laptop, Computers and All USB 2.0 Compatible Devices Including Windows 10/8.1/8 / 7 / Vista/XP

  • ✅ The portable USB to Ethernet adapter and adapter connects to a USB 2.0 port (backwards with USB 1.0) making the USB Ethernet cable modem functional to all types of users. Plus, the Ethernet USB converter 2.0 CONNECTS COMPUTER or TABLET to a router or modem switch to allow a FAST NETWORK CONNECTION. The USB Ethernet adapter 2.0 is compatible with Ethernet networks while the USB to rj45 connector is powered via USB 2.0 for versatility and portability as an add-on or replacement!.
  • ✅ The USB Ethernet LAN network adapter provides an INSTANT WIRED ETHERNET CONNECTION and the USB to network adapter links a USB 2.0 to RJ45 port to your Ultrabook, notebook, Apple Macbook Air, Pro, iMac, HP, Acer, Toshiba, ASUS and all USB 2.0 supported laptop / PC for file transferring. The Ethernet router 100mbps WORKS for VIDEO CONFERENCING, STREAMING or GAMING. Moreover, the USB Ethernet adapter 2.0 is COMPACT and LIGHT WEIGHT making this ethernet USB 2.0 adapter IDEAL for TRAVEL..
  • ✅ This rj45 Ethernet connector and internet cable adapter downloads software upgrades quicker through a wired home / office LAN. The Ethernet to USB converter and USB 2.0 Ethernet LAN adapter connects you to FASTER INTERNET making this USB to Ethernet converter a GREAT SOLUTION for FI....
Check Stock

2PCS DC-DC Boost Converter, DC-DC 3.3V-13V to +15V/-15V Positive Negative Dual Step-Up Converter Board

  • This boost converter module can convert DC 3.3V~13V to DC ±15V..
  • The boost converter module can output positive and negative voltages..
  • Working Frequency: 400kHz, and the power module is automatically raised and lowered..
  • The boost converter module can be widely used as power supply for for ADC, DAC, LCD, and etc..
  • Maximum Input Current: 1.8A, Maximum Output Current: +Vo 600mA,-Vo 120mA, Quiescent Current: 3-4mA.
Check Stock