ReviewsSerial Injection Mold

Soft Plastiс Mold Lure Making Injection Molds Fishing Lures C138

  • MATERIAL: Enginered stone. Stone powded mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure molds..
  • INJECTION: Standart 5/8". This size unsures compatibility with most injectors..
  • LUBRICATION: Recommended. For best results use silicone grease..
  • DETAILED BAIT DESIGN . Fine level of detail comparable with aluminium molds and far better than sikicone molds..
  • SMART AIR VENTS design to release air and make sure that soft plastic fills all details of the mold..
  • Using only one lure mold and different additives you can make a soft plastic lure kit such as ice fishing lures, saltwater lures, freshwater lures, bass lures, etc..
Check Stock

FR4 Epoxy-Sheet Resin Glass-Fiber Insulation-Plate - 335X300X1MM Green

  • 1. FR-4 epoxy board has the characteristics of insulation, flame retardant, high temperature resistance, and strong physical properties.
  • 2. It is an indispensable main material or auxiliary material for high -end motor electrical appliances, wind power, hydropower, rail transit, aviation navigation, mold molds, electronics, intelligent physiotherapy and other industries..
  • 3. You can injection mold molding machine, motor, PCB, ICT treatment table grinding pad, high -performance electronic insulation, FPC reinforcement board, carbon film, insulation pad ..
  • 5.Size: 1/25 "Thick x 11.8" Wide x 13.2 "Long.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Plastic Bodywork White Blue Fairing Fit for Suzuki 2006 2007 GSXR 600 750 Injection Mold ABS New Bodyframe 06 07 GSXR-600 750

  • 1.[Fit for] SUZUKI 2006 2007 GSXR 600 750.
  • 2.[Complete Pieces Included] Front nose+ both sides fairings+ front fender+tail fairing+ unpainted black inner pieces+ rear seat cover + half tank cover.
  • 3.[Complete Pieces Included]Fairing Pieces + Windscreen + Heat-shielding.
  •  Holes and tabs are built into the mold and align to Factory Settings.
  •  Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • 5.[Attention]Instructions are Not Included.Highly Suggest Fairing be Installed by Professionals..
Check Stock

Smedioks Premium Soft Plastiс Mold Lure Making Injection Molds Fishing Lures 3 Cavity Yama Senko 5''

  • MATERIAL: Enginered stone. Stone powded mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure molds..
  • INJECTION: Standart 5/8". This size unsures compatibility with most injectors..
  • LUBRICATION: Recommended. For best results use silicone grease..
  • DETAILED BAIT DESIGN . Fine level of detail comparable with aluminium molds and far better than sikicone molds..
  • SMART AIR VENTS design to release air and make sure that soft plastic fills all details of the mold..
  • Using only one lure mold and different additives you can make a soft plastic lure kit such as ice fishing lures, saltwater lures, freshwater lures, bass lures, etc..
Check Stock

Fairing Purple Fit for Suzuki 2006 2007 GSXR 600/750 Injection Mold ABS Bodywork New Aftermarket Bodyframe Kit Plastic 06 07 GSX-R 600 750 Y111

  • 1.[Fit for] SUZUKI 2006 2007 GSXR 600/750.
  • 2.[Complete Pieces Included] Front nose+ both sides fairings+ front fender+ half tank cover+ tail fairing+ rear seat cowl+ unpainted black inner pieces.
  •  Holes and tabs are built into the mold and align to Factory Settings.
  •  Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • 5.[Attention]Instructions are Not Included.Highly Suggest Fairing be Installed by Professionals..
Check Stock

SRAM Road Computer Mount

  • Injection mold nylon/glass fill with stainless T25 bolt.
Check Stock

Toddler Snow Sled Baby Sled Heavy Duty

  • Heavy duty snow sleds made from HDPE plastics..
  • Solid plastic construction, not cheap injection mold..
  • Assembled with all stainless steel screws..
Check Stock

Toddler Sled for Snow

  • Heavy duty solid plastic construction ( not cheap injection mold ).
  • Assembled with all stainless steel screws..
  • Smooth plastic runners for easy pulling across the snow..
  • Includes cushion pad, seatbelt and 9 ft long pull rope..
Check Stock