ReviewsSerial To Ethernet Module

StarTech.com 1 Port RS232 to Ethernet IP Converter / Device Server - Aluminum - Serial over IP Device Server - Serial to IP Converter (NETRS2321P)

  • ACCESS YOUR SERIAL DEVICES REMOTELY: Use this RS232 to Ethernet IP converter to connect to, configure and remotely manage an RS232 serial device over an IP network.
  • DURABLE CONSTRUCTION: Built with a rugged aluminum housing, this serial to IP Ethernet device server delivers a reliable performance that can be used in almost any environment.
  • FLEXIBLE INSTALLATION: This serial to IP converter can be mounted to a surface or on a DIN rail with the built-in mounting bracket and included DIN rail clips.
  • Access a serial device from anywhere with an IP-based connection.
  • Mount on DIN-rails or on a wall with the attached mounting brackets.
  • Suitable for hash environments with a rugged, aluminum enclosure.
  • Configure via web browser or Virtual Com software interface.
  • Support for DHCP, HTTP, ICMP, ARP, IP, UDP, TCP.
Check Stock

HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane.
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid..
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g..
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect..
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices..
Check Stock

GPS Module Receiver,Navigation Satellite Positioning NEO-6M Arduino GPS Drone Microcontroller GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity,....
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your....
Check Stock

MOXA NPort 5150A - 1 Port RS-232/422/485 Serial Device Server, 0 to 60°C Operating Temperature

  • Connect to configure and remotely manage an RS-232 serial device over an IP network.
Check Stock

Dorhea 3PCS BLE 4.0 Bluetooth Module AT-09 for Ardu-ino CC2540 CC2541 BLE Serial Wireless Module Compatible with HM-10

  • The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
  • Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
  • Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
  • This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

HiLetgo HD44780 2004 LCD 20x4 2004A Character LCD Screen Display Module Blue Backlight with IIC/I2C Serial InterfaceAdapter

  • HD44780 2004 LCD 20x4 2004A Character LCD Display Module.
  • Fully assembled and tested Serial LCD 20x4 Module.
Check Stock

Aideepen 5PCS DFPlayer Mini Mp3 Player Board Module Voice Decode Board Support TF Micro SD Card U Disk Audio Music

  • 【Upgrade】This is a MP3 Player Audio Voice Module, can be connected directly to the speaker.GD3200B chip replacement old YX5200 (Compatibility....
  • Supported Sampling Rates (kHz):8/11.025/12/16/22.05/24/32/44.1/48.
  • 24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB..
  • The DFPlayer perfectly integrates hard decoding module, which supports common audio formats such as MP3, WAV and WMA. Besides, it also supports TF....
  • This Module with battery power supply, speaker, keypad can be used alone, or through the serial port control, as the Arduino UNO or any....
  • A variety of control modes, I/O control mode, serial mode, AD button control mode.-->If you need any questions, please feel free to contact us..
Check Stock

WayinTop 20x4 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter (Yellow Green/2004)

  • 【20x4 LCD Display】With this shield, you can display whatever you want by programming the for Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, 4 rows can display 80 characters..
  • 【IIC Interface Adapter】No need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time..
  • 【Easy to Use】 Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line). Address of the module: 0x27.
  • 【Support IIC Interface】It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • 【Widely Applications】LCD display module based on the popular controller, works great with for Arduino and other micro-controllers..
Check Stock

RedTagCanada SIM900 Quad Band GSM GPRS Quad-Band Modules 2G Shield Development Board for R3 Mega with Antenna for Arduino SCM & DIY Kits

  • Embedded TCP / UDP stack - allows you to upload data to a Web server | RTC supported | selectable serial port | Jac speakers and headphones.
  • Quad-Band 850/900/1800/1900 MHz - could work on GSM networks in all countries around the world, work with Uno Mega..
  • This is a new version (64M version), SMS support MMS: Multimedia message and Short Message Service - so it is possible to send small amounts of data over the network (ASCII or raw hexadecimal).
  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
  • Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced.
  • Power jack - connected to external 4.8~5VDC power supply, Antenna interface - connected to external antenna, Serial port select - select either software s....
Check Stock